[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1456527942-3045-1-git-send-email-eric@anholt.net>
Date: Fri, 26 Feb 2016 15:05:38 -0800
From: Eric Anholt <eric@...olt.net>
To: linux-rpi-kernel@...ts.infradead.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Stephen Warren <swarren@...dotorg.org>,
Lee Jones <lee@...nel.org>,
Florian Fainelli <f.fainelli@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
Ulf Hansson <ulf.hansson@...aro.org>,
linux-mmc@...r.kernel.org, Eric Anholt <eric@...olt.net>
Subject: [PATCH 0/4] bcm2835 SDHOST controller
Here's a series to enable the SDHOST controller. It gives us better
performance than our old sdhci-bcm2835.c. The downstream Raspberry Pi
kernel appears to be using this controller by default at this point.
I've tried to do some testing on it (mounting filesystem,
reading/writing files, speed tests), but I'm not sure what a good
testing regimen for storage drivers would be.
Eric Anholt (4):
dt-bindings: Add binding for brcm,bcm2835-sdhost.
mmc: bcm2835-sdhost: Add new driver for the internal SD controller.
ARM: bcm2835: Include SDHOST in the device tree.
ARM: bcm2835: Enable SDHOST by default.
.../bindings/mmc/brcm,bcm2835-sdhost.txt | 25 +
arch/arm/boot/dts/bcm2835-rpi.dtsi | 10 +-
arch/arm/boot/dts/bcm283x.dtsi | 8 +
drivers/mmc/host/Kconfig | 9 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/bcm2835-sdhost.c | 1652 ++++++++++++++++++++
6 files changed, 1704 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
create mode 100644 drivers/mmc/host/bcm2835-sdhost.c
--
2.7.0
Powered by blists - more mailing lists