linux-kernel - [PATCH 3/4] ARM: bcm2835: Include SDHOST in the device tree.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 26 Feb 2016 15:05:41 -0800
From:	Eric Anholt <eric@...olt.net>
To:	linux-rpi-kernel@...ts.infradead.org
Cc:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Stephen Warren <swarren@...dotorg.org>,
	Lee Jones <lee@...nel.org>,
	Florian Fainelli <f.fainelli@...il.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
	Ulf Hansson <ulf.hansson@...aro.org>,
	linux-mmc@...r.kernel.org, Eric Anholt <eric@...olt.net>
Subject: [PATCH 3/4] ARM: bcm2835: Include SDHOST in the device tree.

It's disabled by default, and will be enabled by a particular board's
DT.  The DMA channels are also currently left out, because our DMA
engine support doesn't yet include slave SG, and there doesn't appear
to be a clean way to include "does slave SG" in the channel
request/config process.

Signed-off-by: Eric Anholt <eric@...olt.net>
---
 arch/arm/boot/dts/bcm283x.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 597a78f..7b2721b 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -366,6 +366,14 @@
 			status = "disabled";
 		};
 
+		sdhost: sdhost@...02000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			status = "disabled";
+		};
+
 		pwm: pwm@...0c000 {
 			compatible = "brcm,bcm2835-pwm";
 			reg = <0x7e20c000 0x28>;
-- 
2.7.0