[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1456496504-50429-8-git-send-email-blogic@openwrt.org>
Date: Fri, 26 Feb 2016 15:21:39 +0100
From: John Crispin <blogic@...nwrt.org>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
Matthias Brugger <matthias.bgg@...il.com>,
Steven Liu (劉人豪)
<steven.liu@...iatek.com>,
Carlos Huang (黃士彰)
<Carlos.Huang@...iatek.com>,
Fred Chang (張嘉宏)
<Fred.Chang@...iatek.com>, John Crispin <blogic@...nwrt.org>,
Felix Fietkau <nbd@...nwrt.org>, Michael Lee <igvtee@...il.com>
Subject: [PATCH V2 07/12] net-next: mediatek: add support for rt3883
Add support for rt3883 and its smaller version rt3662. They both have a
single gBit port that will normally be attached to an external phy or
switch. There are not many rt3883 based routers in the field. I think
there is a second MAC on these SoCs. Due to lack of hardware utilizing this
I never added support. RT3883 is somewhat unique as it is the only SoC made
by Ralink that uses the mips74 core.
Signed-off-by: John Crispin <blogic@...nwrt.org>
Signed-off-by: Felix Fietkau <nbd@...nwrt.org>
Signed-off-by: Michael Lee <igvtee@...il.com>
---
drivers/net/ethernet/mediatek/soc_rt3883.c | 72 ++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 drivers/net/ethernet/mediatek/soc_rt3883.c
diff --git a/drivers/net/ethernet/mediatek/soc_rt3883.c b/drivers/net/ethernet/mediatek/soc_rt3883.c
new file mode 100644
index 0000000..8138370
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/soc_rt3883.c
@@ -0,0 +1,72 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2016 John Crispin <blogic@...nwrt.org>
+ * Copyright (C) 2009-2016 Felix Fietkau <nbd@...nwrt.org>
+ * Copyright (C) 2013-2016 Michael Lee <igvtee@...il.com>
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "mdio_rt2880.h"
+
+#define RT3883_RSTCTRL_FE BIT(21)
+
+static void rt3883_mtk_reset(struct mtk_eth *eth)
+{
+ mtk_reset(eth, RT3883_RSTCTRL_FE);
+}
+
+static int rt3883_fwd_config(struct mtk_eth *eth)
+{
+ int ret;
+
+ ret = mtk_set_clock_cycle(eth);
+ if (ret)
+ return ret;
+
+ mtk_fwd_config(eth);
+ mtk_w32(eth, MTK_PSE_FQFC_CFG_256Q, MTK_PSE_FQ_CFG);
+ mtk_csum_config(eth);
+
+ return ret;
+}
+
+static struct mtk_soc_data rt3883_data = {
+ .hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX,
+ .dma_type = MTK_PDMA,
+ .dma_ring_size = 128,
+ .napi_weight = 32,
+ .padding_64b = 1,
+ .padding_bug = 1,
+ .mac_count = 1,
+ .txd4 = TX_DMA_DESP4_DEF,
+ .reset_fe = rt3883_mtk_reset,
+ .fwd_config = rt3883_fwd_config,
+ .pdma_glo_cfg = MTK_PDMA_SIZE_8DWORDS,
+ .rx_int = MTK_RX_DONE_INT,
+ .tx_int = MTK_TX_DONE_INT,
+ .status_int = MTK_CNT_GDM_AF,
+ .checksum_bit = RX_DMA_L4VALID,
+ .mdio_read = rt2880_mdio_read,
+ .mdio_write = rt2880_mdio_write,
+ .mdio_adjust_link = rt2880_mdio_link_adjust,
+ .port_init = rt2880_port_init,
+};
+
+const struct of_device_id of_mtk_match[] = {
+ { .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_mtk_match);
--
1.7.10.4
Powered by blists - more mailing lists