[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56D0629C.9080805@imgtec.com>
Date: Fri, 26 Feb 2016 14:35:08 +0000
From: Harvey Hunt <harvey.hunt@...tec.com>
To: Boris Brezillon <boris.brezillon@...e-electrons.com>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
<linux-mtd@...ts.infradead.org>
CC: Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
"Kukjin Kim" <kgene@...nel.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
<linux-samsung-soc@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Ralf Baechle <ralf@...ux-mips.org>,
<linux-mips@...ux-mips.org>,
"Nicolas Ferre" <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Wenyou Yang <wenyou.yang@...el.com>,
Josh Wu <rainyfeeling@...look.com>,
Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>, <linux-sunxi@...glegroups.com>,
Stefan Agner <stefan@...er.ch>,
Kyungmin Park <kyungmin.park@...sung.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
<devel@...verdev.osuosl.org>, <linux-kernel@...r.kernel.org>,
"punnaiah choudary kalluri" <punnaia@...inx.com>,
Priit Laes <plaes@...es.org>,
"Kamal Dasu" <kdasu.kdev@...il.com>,
<bcm-kernel-feedback-list@...adcom.com>,
<linux-api@...r.kernel.org>
Subject: Re: [PATCH v3 07/52] mtd: nand: core: use mtd_ooblayout_xxx() helpers
where appropriate
Hi Boris,
On 26/02/16 00:57, Boris Brezillon wrote:
> The mtd_ooblayout_xxx() helper functions have been added to avoid direct
> accesses to the ecclayout field, and thus ease for future reworks.
> Use these helpers in all places where the oobfree[] and eccpos[] arrays
> where directly accessed.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
> ---
> drivers/mtd/nand/nand_base.c | 183 +++++++++++++++++++------------------------
> drivers/mtd/nand/nand_bch.c | 3 +-
> 2 files changed, 82 insertions(+), 104 deletions(-)
>
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 91672bf..17504f2 100644
[...]
I just pulled your nand/ecclayout branch from github and tested out your
latest patchset "mtd: rework ECC layout definition" on a Ci20
(jz4780_{nand,bch}) and noticed that my board was failing to boot.
I bisected to this patch, here is the kernel's output during boot:
479556d ("mtd: nand: core: use mtd_ooblayout_xxx() helpers where
appropriate"):
[ 0.256349] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x88
[ 0.262860] nand: Micron MT29F64G08CBAAAWP
[ 0.266970] nand: 8192 MiB, MLC, erase size: 2048 KiB, page size: 8192,
OOB size: 448
[ 0.274856] jz4780-nand 1b000000.nand-controller: using hardware BCH
(strength 24, size 1024, bytes 42)
[ 0.288982] Bad block table not found for chip 0
[ 0.297673] Bad block table not found for chip 0
[ 0.302328] Scanning device for bad blocks
[ 0.320135] Bad eraseblock 90 at 0x00000b400000
[ 0.324829] Bad eraseblock 91 at 0x00000b600000
[ 0.931085] Bad eraseblock 4092 at 0x0001ff800000
[ 0.935947] Bad eraseblock 4093 at 0x0001ffa00000
[ 0.944878] nand_bbt: error while writing bad block table -34
[ 0.950666] jz4780-nand: probe of 1b000000.nand-controller failed with
error -34
[ 0.958302] UBI error: cannot open mtd 3, error -19
[ 0.963002] UBI error: cannot open mtd 4, error -19[ 0.970419] clk: Not
disabling unused clocks
[ 0.975011] UBIFS error (pid: 1): cannot open "ubi1:root", error -19VFS:
Cannot open root device "ubi1:root" or unknown-block(0,0): error -19
[ 0.987810] Please append a correct "root=" boot option; here are the
available partitions:
[ 0.996210] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
[ 1.004498] Rebooting in 10 seconds..
6625d32 ("mtd: use mtd_ooblayout_xxx() helpers where appropriate"):
[ 0.256232] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x88
[ 0.262745] nand: Micron MT29F64G08CBAAAWP
[ 0.266854] nand: 8192 MiB, MLC, erase size: 2048 KiB, page size: 8192,
OOB size: 448
[ 0.274739] jz4780-nand 1b000000.nand-controller: using hardware BCH
(strength 24, size 1024, bytes 42)
[ 0.285993] Bad block table found at page 1048320, version 0x01
[ 0.294353] Bad block table found at page 1048064, version 0x01
[ 0.301523] nand_read_bbt: bad block at 0x00000b400000
[ 0.306677] nand_read_bbt: bad block at 0x00000b600000
[ 0.312289] 5 ofpart partitions found on MTD device
1b000000.nand-controller.1
[ 0.319553] Creating 5 MTD partitions on "1b000000.nand-controller.1":
[ 0.326098] 0x000000000000-0x000000800000 : "u-boot-spl"
[ 0.331757] 0x000000800000-0x000000a00000 : "u-boot"
[ 0.337185] 0x000000a00000-0x000000c00000 : "u-boot-env"
[ 0.342903] 0x000000c00000-0x000004c00000 : "boot"
[ 0.348109] 0x000004c00000-0x000200000000 : "system"
[ 0.354284] ubi0 error: ubi_attach_mtd_dev: More than 64 PEBs are needed
for fastmap, sorry.
[...]
I'll look into this more later today, but wanted to run it by you in
case you have any thoughts.
Thanks,
Harvey
Powered by blists - more mailing lists