| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <56D08823.2020709@microchip.com>
Date: Fri, 26 Feb 2016 10:15:15 -0700
From: Joshua Henderson <joshua.henderson@...rochip.com>
To: Guenter Roeck <linux@...ck-us.net>, <linux-kernel@...r.kernel.org>
CC: <linux-mips@...ux-mips.org>, <ralf@...ux-mips.org>,
Purna Chandra Mandal <purna.mandal@...rochip.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Wim Van Sebroeck <wim@...ana.be>,
<devicetree@...r.kernel.org>, <linux-watchdog@...r.kernel.org>
Subject: Re: [PATCH v2 2/2] watchdog: pic32-wdt: Add PIC32 watchdog driver
Guenter,
On 02/26/2016 07:06 AM, Guenter Roeck wrote:
> On 02/25/2016 10:27 AM, Joshua Henderson wrote:
>> Add support for the watchdog peripheral found on PIC32 class
>> devices.
>>
>> Signed-off-by: Joshua Henderson <joshua.henderson@...rochip.com>
>> Signed-off-by: Purna Chandra Mandal <purna.mandal@...rochip.com>
>> Cc: Ralf Baechle <ralf@...ux-mips.org>
>> ---
>> Note: Please merge this patch series through the MIPS tree.
>>
>> Changes since v1:
>> - Shorten commit description
>> - Don't default to y in Kconfig
>> - Alphabetical ordering of includes
>> - Use BIT() where applicable
>> - Use consistent function name prefixes
>> - Inline some single use functions
>> - Use a return of bool when appropriate
>> - Replace cpu_relax() with nop and explain why this is needed
>> - Better error handling, especially to prevent divide by zero
>> - Remove unecessary pr_info().
>> - Remove redudant driver spinlock which is already covered by
>> watchdog core
>> - Drop .get_timeleft implementation
>> - Fix typo in compatibility flag and driver name
>> - Remove wdt->timeout variable and calculation
>> - Fix race condition in watchdog driver registration
>> ---
>> drivers/watchdog/Kconfig | 13 +++
>> drivers/watchdog/Makefile | 1 +
>> drivers/watchdog/pic32-wdt.c | 264 ++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 278 insertions(+)
>> create mode 100644 drivers/watchdog/pic32-wdt.c
>>
>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>> index 0f6d851..543fa81 100644
>> --- a/drivers/watchdog/Kconfig
>> +++ b/drivers/watchdog/Kconfig
>> @@ -1414,6 +1414,19 @@ config MT7621_WDT
>> help
>> Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer.
>>
>> +config PIC32_WDT
>> + tristate "Microchip PIC32 hardware watchdog"
>> + select WATCHDOG_CORE
>> + depends on MACH_PIC32
>> + help
>> + Watchdog driver for the built in watchdog hardware in a PIC32.
>> +
>> + Configuration bits must be set appropriately for the watchdog to be
>> + controlled by this driver.
>> +
>> + To compile this driver as a loadable module, choose M here.
>> + The module will be called pic32-wdt.
>> +
>> # PARISC Architecture
>>
>> # POWERPC Architecture
>> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
>> index f566753..244ed80 100644
>> --- a/drivers/watchdog/Makefile
>> +++ b/drivers/watchdog/Makefile
>> @@ -153,6 +153,7 @@ obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
>> obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
>> obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
>> obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
>> +obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o
>>
>> # PARISC Architecture
>>
>> diff --git a/drivers/watchdog/pic32-wdt.c b/drivers/watchdog/pic32-wdt.c
>> new file mode 100644
>> index 0000000..caec459
>> --- /dev/null
>> +++ b/drivers/watchdog/pic32-wdt.c
>> @@ -0,0 +1,264 @@
>> +/*
>> + * PIC32 watchdog driver
>> + *
>> + * Joshua Henderson <joshua.henderson@...rochip.com>
>> + * Copyright (c) 2016, Microchip Technology Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * as published by the Free Software Foundation; either version
>> + * 2 of the License, or (at your option) any later version.
>> + */
>> +
>> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>> +
>> +#include <linux/clk.h>
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm.h>
>> +#include <linux/watchdog.h>
>> +
>> +#include <asm/mach-pic32/pic32.h>
>> +
>> +/* Watchdog Timer Registers */
>> +#define WDTCON_REG 0x00
>> +
>> +/* Watchdog Timer Control Register fields */
>> +#define WDTCON_WIN_EN BIT(0)
>> +#define WDTCON_RMCS_MASK 0x0003
>> +#define WDTCON_RMCS_SHIFT 0x0006
>> +#define WDTCON_RMPS_MASK 0x001F
>> +#define WDTCON_RMPS_SHIFT 0x0008
>> +#define WDTCON_ON BIT(15)
>> +#define WDTCON_CLR_KEY 0x5743
>> +
>> +/* Reset Control Register fields for watchdog */
>> +#define RESETCON_TIMEOUT_IDLE BIT(2)
>> +#define RESETCON_TIMEOUT_SLEEP BIT(3)
>> +#define RESETCON_WDT_TIMEOUT BIT(4)
>> +
>> +struct pic32_wdt {
>> + void __iomem *regs;
>> + void __iomem *rst_base;
>> + struct clk *clk;
>> +};
>> +
>> +static inline bool pic32_wdt_is_win_enabled(struct pic32_wdt *wdt)
>> +{
>> + return !!(readl(wdt->regs + WDTCON_REG) & WDTCON_WIN_EN);
>> +}
>> +
>> +static inline u32 pic32_wdt_get_post_scaler(struct pic32_wdt *wdt)
>> +{
>> + u32 v = readl(wdt->regs + WDTCON_REG);
>> +
>> + return (v >> WDTCON_RMPS_SHIFT) & WDTCON_RMPS_MASK;
>> +}
>> +
>> +static inline u32 pic32_wdt_get_clk_id(struct pic32_wdt *wdt)
>> +{
>> + u32 v = readl(wdt->regs + WDTCON_REG);
>> +
>> + return (v >> WDTCON_RMCS_SHIFT) & WDTCON_RMCS_MASK;
>> +}
>> +
>> +static int pic32_wdt_bootstatus(struct pic32_wdt *wdt)
>> +{
>> + u32 v = readl(wdt->rst_base);
>> +
>> + writel(RESETCON_WDT_TIMEOUT, PIC32_CLR(wdt->rst_base));
>> +
>> + return v & RESETCON_WDT_TIMEOUT;
>> +}
>> +
>> +static int pic32_wdt_get_timeout_secs(struct pic32_wdt *wdt)
>> +{
>> + unsigned long rate;
>> + u32 period, ps, terminal;
>> +
>> + rate = clk_get_rate(wdt->clk);
>> + if (!rate)
>> + return 0;
>> +
>> + pr_debug("wdt: clk_id %d, clk_rate %lu (prescale)\n",
>> + pic32_wdt_get_clk_id(wdt), rate);
>> +
>
> Please pass 'dev' as argument and use dev_dbg().
> Then you can also remove the #define pr_fmt above.
Ack.
>
>> + /* default, prescaler of 32 (i.e. div-by-32) is implicit. */
>> + rate >>= 5;
>
> Instead of checking rate for 0 above, it might make more sense
> to check if it is 0 here.
Ack.
>
>> +
>> + /* calculate terminal count from postscaler. */
>> + ps = pic32_wdt_get_post_scaler(wdt);
>> + terminal = BIT(ps);
>> +
>> + /* find time taken (in secs) to reach terminal count */
>> + period = terminal / rate;
>
> With ps == 31, and rate == 1, the period would end up being 0x80000000,
> or negative. Not that it matters (it is assigned to an unsigned on return),
> but for consistency it might be better to return an unsigned int.
Makes sense.
>
>> + pr_debug("wdt: clk_rate %lu (postscale) / terminal %d, timeout %dsec\n",
>> + rate, terminal, period);
>> +
>> + return period;
>> +}
>> +
>> +static void pic32_wdt_keepalive(struct pic32_wdt *wdt)
>> +{
>> + /* write key through single half-word */
>> + writew(WDTCON_CLR_KEY, wdt->regs + WDTCON_REG + 2);
>> +}
>> +
>> +static int pic32_wdt_start(struct watchdog_device *wdd)
>> +{
>> + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> + writel(WDTCON_ON, PIC32_SET(wdt->regs + WDTCON_REG));
>> + pic32_wdt_keepalive(wdt);
>> +
>> + return 0;
>> +}
>> +
>> +static int pic32_wdt_stop(struct watchdog_device *wdd)
>> +{
>> + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> + writel(WDTCON_ON, PIC32_CLR(wdt->regs + WDTCON_REG));
>> + /*
>> + * Cannot touch registers in the CPU cycle following clearing the
>> + * ON bit.
>> + */
>> + nop();
>> +
>> + return 0;
>> +}
>> +
>> +static int pic32_wdt_ping(struct watchdog_device *wdd)
>> +{
>> + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> + pic32_wdt_keepalive(wdt);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct watchdog_ops pic32_wdt_fops = {
>> + .owner = THIS_MODULE,
>> + .start = pic32_wdt_start,
>> + .stop = pic32_wdt_stop,
>> + .ping = pic32_wdt_ping,
>> +};
>> +
>> +static const struct watchdog_info pic32_wdt_ident = {
>> + .options = WDIOF_KEEPALIVEPING |
>> + WDIOF_MAGICCLOSE | WDIOF_CARDRESET,
>> + .identity = "PIC32 Watchdog",
>> +};
>> +
>> +static struct watchdog_device pic32_wdd = {
>> + .info = &pic32_wdt_ident,
>> + .ops = &pic32_wdt_fops,
>> +};
>> +
>> +static const struct of_device_id pic32_wdt_dt_ids[] = {
>> + { .compatible = "microchip,pic32mzda-wdt", },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, pic32_wdt_dt_ids);
>> +
>> +static int pic32_wdt_drv_probe(struct platform_device *pdev)
>> +{
>> + int ret;
>> + struct watchdog_device *wdd = &pic32_wdd;
>> + struct pic32_wdt *wdt;
>> + struct resource *mem;
>> +
>> + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
>> + if (IS_ERR(wdt))
>> + return PTR_ERR(wdt);
>> +
>> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + wdt->regs = devm_ioremap_resource(&pdev->dev, mem);
>> + if (IS_ERR(wdt->regs))
>> + return PTR_ERR(wdt->regs);
>> +
>> + wdt->rst_base = devm_ioremap(&pdev->dev, PIC32_BASE_RESET, 0x10);
>> + if (IS_ERR(wdt->rst_base))
>> + return PTR_ERR(wdt->rst_base);
>> +
>> + wdt->clk = devm_clk_get(&pdev->dev, NULL);
>> + if (IS_ERR(wdt->clk)) {
>> + dev_err(&pdev->dev, "clk not found\n");
>> + return PTR_ERR(wdt->clk);
>> + }
>> +
>> + ret = clk_prepare_enable(wdt->clk);
>> + if (ret) {
>> + dev_err(&pdev->dev, "clk enable failed\n");
>> + return ret;
>> + }
>> +
>> + if (pic32_wdt_is_win_enabled(wdt)) {
>> + dev_err(&pdev->dev, "windowed-clear mode is not supported.\n");
>> + ret = -EOPNOTSUPP;
>
> -ENODEV, please.
Ack.
>
>> + goto out_disable_clk;
>> + }
>> +
>> + wdd->timeout = pic32_wdt_get_timeout_secs(wdt);
>> + if (!wdd->timeout) {
>> + dev_err(&pdev->dev,
>> + "failed to read watchdog register timeout\n");
>> + ret = -EINVAL;
>> + goto out_disable_clk;
>> + }
>> +
>> + dev_info(&pdev->dev, "timeout %d\n", wdd->timeout);
>> +
>> + wdd->bootstatus = pic32_wdt_bootstatus(wdt) ? WDIOF_CARDRESET : 0;
>> +
>> + watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
>> + watchdog_set_drvdata(wdd, wdt);
>> +
>> + ret = watchdog_register_device(wdd);
>> + if (ret) {
>> + dev_err(&pdev->dev, "watchdog register failed, err %d\n", ret);
>> + goto out_disable_clk;
>> + }
>> +
>> + platform_set_drvdata(pdev, wdd);
>> +
>> + return 0;
>> +
>> +out_disable_clk:
>> + clk_disable_unprepare(wdt->clk);
>> +
>> + return ret;
>> +}
>> +
>> +static int pic32_wdt_drv_remove(struct platform_device *pdev)
>> +{
>> + struct watchdog_device *wdd = platform_get_drvdata(pdev);
>> + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> + watchdog_unregister_device(wdd);
>> + clk_disable_unprepare(wdt->clk);
>> +
>> + return 0;
>> +}
>> +
>> +static struct platform_driver pic32_wdt_driver = {
>> + .probe = pic32_wdt_drv_probe,
>> + .remove = pic32_wdt_drv_remove,
>> + .driver = {
>> + .name = "pic32-wdt",
>> + .owner = THIS_MODULE,
>> + .of_match_table = of_match_ptr(pic32_wdt_dt_ids),
>> + }
>> +};
>> +
>> +module_platform_driver(pic32_wdt_driver);
>> +
>> +MODULE_AUTHOR("Joshua Henderson <joshua.henderson@...rochip.com>");
>> +MODULE_DESCRIPTION("Microchip PIC32 Watchdog Timer");
>> +MODULE_LICENSE("GPL");
>>
>
Thanks,
Josh
Powered by blists - more mailing lists