linux-kernel - [PATCH net-next 0/9] net: dsa: mv88e6xxx: implement VLAN filtering

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 26 Feb 2016 13:15:59 -0500
From:	Vivien Didelot <vivien.didelot@...oirfairelinux.com>
To:	netdev@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org, kernel@...oirfairelinux.com,
	"David S. Miller" <davem@...emloft.net>,
	Florian Fainelli <f.fainelli@...il.com>,
	Andrew Lunn <andrew@...n.ch>,
	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
	Guenter Roeck <linux@...ck-us.net>,
	Neil Armstrong <narmstrong@...libre.com>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Russell King <rmk+kernel@....linux.org.uk>,
	Kevin Smith <kevin.smith@...csyscorp.com>,
	Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Subject: [PATCH net-next 0/9] net: dsa: mv88e6xxx: implement VLAN filtering

This patchset fixes hardware bridging for non 802.1Q aware systems.

The mv88e6xxx DSA driver currently depends on CONFIG_VLAN_8021Q and
CONFIG_BRIDGE_VLAN_FILTERING enabled for correct bridging between switch ports.

Patch 1/9 adds support for the VLAN filtering switchdev attribute in DSA.

Patchs 2/9 and 3/9 add helper functions for the following patches.

Patchs 4/9 to 6/9 assign dynamic address databases to VLANs, ports, and
bridge groups (the lowest available FID is cleared and assigned), and thus
restore support for per-port FDB operations.

Patchs 7/9 to 9/9 refine ports isolation and setup 802.1Q on user demand.

With this patchset, ports get correctly bridged and the driver behaves as
expected, with or without 802.1Q support.

With CONFIG_VLAN_8021Q enabled, setting a default PVID to the bridge correctly
propagates the corresponding VLAN, in addition to the hardware bridging:

    # echo 42 > /sys/class/net/<bridge>/bridge/default_pvid

But considering CONFIG_BRIDGE_VLAN_FILTERING enabled, the hardware VLAN
filtering is enabled on all bridge members only when the user requests it:

    # echo 1 > /sys/class/net/<bridge>/bridge/vlan_filtering

Vivien Didelot (9):
  net: dsa: support VLAN filtering switchdev attr
  net: dsa: mv88e6xxx: extract single VLAN retrieval
  net: dsa: mv88e6xxx: extract single FDB dump
  net: dsa: mv88e6xxx: assign dynamic FDB to VLANs
  net: dsa: mv88e6xxx: assign default FDB to ports
  net: dsa: mv88e6xxx: assign dynamic FDB to bridges
  net: dsa: mv88e6xxx: restore VLANTable map control
  net: dsa: mv88e6xxx: remove reserved VLANs
  net: dsa: mv88e6xxx: support VLAN filtering

 drivers/net/dsa/mv88e6171.c |   1 +
 drivers/net/dsa/mv88e6352.c |   1 +
 drivers/net/dsa/mv88e6xxx.c | 441 ++++++++++++++++++++++++++++++++++----------
 drivers/net/dsa/mv88e6xxx.h |   6 +
 include/net/dsa.h           |   2 +
 net/dsa/slave.c             |  21 +++
 6 files changed, 370 insertions(+), 102 deletions(-)

-- 
2.7.1