| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1456608417-13514-3-git-send-email-robert.jarzmik@free.fr>
Date: Sat, 27 Feb 2016 22:26:57 +0100
From: Robert Jarzmik <robert.jarzmik@...e.fr>
To: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org,
Robert Jarzmik <robert.jarzmik@...e.fr>
Subject: [PATCH RFC 2/2] ARM: dts: pxa: add zylonite devicetree board
Add the description of the Zylonite board. This should be the equivalent
of arch/arm/mach-pxa/zylonite.c and part of
arch/arm/mach-pxa/zylonite_pxa300.c
Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
---
arch/arm/boot/dts/zylonite310.dts | 682 ++++++++++++++++++++++++++++++++++++++
1 file changed, 682 insertions(+)
create mode 100644 arch/arm/boot/dts/zylonite310.dts
diff --git a/arch/arm/boot/dts/zylonite310.dts b/arch/arm/boot/dts/zylonite310.dts
new file mode 100644
index 000000000000..3989ba4b455a
--- /dev/null
+++ b/arch/arm/boot/dts/zylonite310.dts
@@ -0,0 +1,682 @@
+/*
+ * Copyright (C) Robert Jarzmik <robert.jarzmik@...e.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "pxa3xx.dtsi"
+#include "include/dt-bindings/gpio/gpio.h"
+#include "include/dt-bindings/clock/pxa-clock.h"
+#include "dt-bindings/interrupt-controller/irq.h"
+
+/ {
+ model = "Marvell Zylonite System Development Platform";
+ compatible = "marvell,pxa310", "marvell,pxa3xx";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk root=/dev/ram0 ip=dhcp";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0xa0000000 0x04000000>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pstore_region:region@...2000000 {
+ compatible = "linux,contiguous-memory-region";
+ reg = <0xa2000000 1048576>;
+ };
+ };
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pxabus {
+ pxai2c1: i2c@...01680 {
+ mrvl,i2c-fast-mode;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmux_i2c_default>;
+
+ status = "okay";
+
+ ext_gpio1: gpio@74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ interrupts-extended = <&gpio 18 IRQ_TYPE_EDGE_BOTH>;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_pca9539_1_default >;
+ status = "okay";
+ };
+ ext_gpio2: gpio@75 {
+ compatible = "nxp,pca9539";
+ reg = <0x75>;
+ interrupts-extended = <&gpio 19 IRQ_TYPE_EDGE_BOTH>;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_pca9539_2_default >;
+ status = "okay";
+ };
+ };
+
+ gpio: gpio@...00000 {
+ status = "okay";
+ };
+
+ ffuart: uart@...00000 {
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_ffuart_default
+ &pmux_ffuart_wak1_default >;
+ status = "okay";
+ };
+
+ btuart: uart@...00000 {
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_btuart_default
+ &pmux_btuart_wak1_default
+ &pmux_btuart_wak2_default >;
+ status = "okay";
+ };
+
+ nand0: nand@...00000 {
+ num-cs = <1>;
+ marvell,nand-enable-arbiter;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ marvell,detect-delay-ms = <200>;
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "TIMH";
+ reg = <0x0000000 0x20000>;
+ read-only;
+ };
+
+ obmi@...00 {
+ reg = <0x0020000 0x20000>;
+ read-only;
+ };
+
+ barebox@...00 {
+ reg = <0x0040000 0xc0000>;
+ read-only;
+ };
+
+ barebox-env@...000 {
+ reg = <0x0100000 0x40000>;
+ read-only;
+ };
+
+ kernel@...000 {
+ reg = <0x0100000 0xc00000>;
+ read-only;
+ };
+
+ root@...000 {
+ reg = <0x0d40000 0x2520000>;
+ read-only;
+ };
+ };
+ };
+
+ mmc0: mmc@...00000 {
+ vmmc-supply = <®_vcc3v3>;
+ cd-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ marvell,detect-delay-ms = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_mmc1_default &pmux_mmc1_wak_default >;
+ status = "okay";
+ };
+
+ mmc1: mmc@...00000 {
+ vmmc-supply = <®_vcc3v3>;
+ cd-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ marvell,detect-delay-ms = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_mmc2_default &pmux_mmc2_wak_default >;
+ status = "okay";
+ };
+
+ lcd-controller@...00000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmux_lcd_ds01x_default &pmux_lcd_ds02x_default>;
+ port {
+ lcdc_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ bus-width = <16>;
+ };
+ };
+ };
+
+ lan: smc91c111@...00300 {
+ compatible = "smsc,lan91c111";
+ reg = <0x14000300 0xfffff>;
+ interrupts-extended = <&gpio 102 IRQ_TYPE_EDGE_RISING>;
+ reg-io-width = <2>;
+ dmas = <&pdma 0xffffffff 3>;
+ dma-names = "data";
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_lan_default >;
+ };
+
+ keypad: keypad@...00000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_keypad_out_default
+ &pmux_keypad_wak_default >;
+
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <
+ 0x00000041 /* A */
+ 0x00010042 /* B */
+ 0x00020043 /* C */
+ 0x00050044 /* D */
+
+ 0x01000045 /* E */
+ 0x01010046 /* F */
+ 0x01020047 /* G */
+ 0x01050048 /* H */
+
+ 0x02000049 /* I */
+ 0x0201004a /* J */
+ 0x0202004b /* K */
+ 0x0205004c /* L */
+
+ 0x0300004d /* M */
+ 0x0301004e /* N */
+ 0x0302004f /* O */
+ 0x03050050 /* P */
+
+ 0x05000051 /* Q */
+ 0x05010052 /* R */
+ 0x05020053 /* S */
+ 0x05050054 /* T */
+
+ 0x06000055 /* U */
+ 0x06010056 /* V */
+ 0x06020057 /* W */
+ 0x06050058 /* X */
+
+ 0x07010059 /* Y */
+ 0x0702005a /* Z */
+
+ 0x04040030 /* 0 */
+ 0x01030031 /* 1 */
+ 0x04010032 /* 2 */
+ 0x01040033 /* 3 */
+ 0x02030034 /* 4 */
+ 0x04020035 /* 5 */
+ 0x02040036 /* 6 */
+ 0x03030037 /* 7 */
+ 0x04030038 /* 8 */
+ 0x03040039 /* 9 */
+
+ 0x04050020 /* */
+ 0x0503002a /* * */
+ 0x05040023 /* # */
+
+ 0x00070067 /* KEY_UP */
+ 0x0107006c /* KEY_DOWN */
+ 0x02070069 /* KEY_LEFT */
+ 0x0307006a /* KEY_RIGHT */
+ 0x02060066 /* KEY_HOME */
+ 0x0306006b /* KEY_END */
+ 0x0604006f /* KEY_DELETE */
+ 0x0606000e /* KEY_BACK */
+ 0x0603003a /* KEY_CAPSLOCK */
+
+ 0x0406001c /* KEY_ENTER */
+ 0x0507001c /* KEY_ENTER */
+
+ 0x000400d7 /* KEY_EMAIL */
+ 0x050600e7 /* KEY_SEND */
+ 0x0400018d /* KEY_CALENDAR */
+ 0x070600a7 /* KEY_RECORD */
+ 0x06070073 /* KEY_VOLUMEUP */
+ 0x07070072 /* KEY_VOLUMEDOWN */
+
+ 0x000600c0 /* KEY_F22 */
+ 0x010600c1 /* KEY_F23 */
+ 0x00030186 >; /* KEY_AUX */
+
+ marvell,rotary0 = <0x006c0067>; /* KEY_UP & KEY_DOWN */
+ marvell,debounce-interval = <30>;
+ };
+
+ pxa3xx_ohci: usb@...00000 {
+ marvell,port-mode = <3>;
+ marvell,enable-port1;
+ marvell,enable-port2;
+ marvell,power-control-low;
+ marvell,port-sense-low;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_usbh_default >;
+ status = "okay";
+ };
+
+ ssp3: ssp@...00000 {
+ compatible = "mrvl,pxa3xx-ssp";
+ reg = <0x41900000 0x40>;
+ interrupts = <0>;
+ clocks = < &clks CLK_SSP3 >;
+ dmas = <&pdma 66 3
+ &pdma 67 3>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_ssp3_low_default
+ &pmux_ssp3_float_default >;
+ status = "okay";
+ };
+
+ ssp_dai0: ssp_dai@0 {
+ compatible = "mrvl,pxa-ssp-dai";
+ port = <&ssp3>;
+ #sound-dai-cells = <0>;
+ };
+ ac97: sound@...00000 {
+ compatible = "marvell,pxa2xx-ac97";
+ reg = < 0x40500000 0x1000 >;
+ interrupts = <14>;
+ reset-gpio = <&gpio 113 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_ac97_default >;
+ status = "okay";
+ };
+
+ pxa_pcm_audio: snd_soc_pxa_audio {
+ compatible = "mrvl,pxa-pcm-audio";
+ #sound-dai-cells = <1>;
+ };
+ pxa_ssp_dai: snd_soc_pxa_audio {
+ compatible = "mrvl,pxa-pcm-audio";
+ #sound-dai-cells = <1>;
+ };
+
+ wm9713: wm9713@0 {
+ compatible = "wlf,wm9713";
+ #sound-dai-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_wm9713_default >;
+ status = "okay";
+ };
+ };
+
+ panel {
+ compatible = "sharp,ls037";
+ lcd-type = "color-tft";
+
+ /*
+ power-supply = <&lcd_supply>;
+ backlight = <&lcd_backlight>;
+ */
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lcdc_out>;
+ };
+ };
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 480p {
+ /* 480x640p24 */
+ clock-frequency = <39700>;
+ hactive = <240>;
+ vactive = <320>;
+ hfront-porch = <81>;
+ hback-porch = <81>;
+ hsync-len = <8>;
+ vback-porch = <2>;
+ vfront-porch = <7>;
+ vsync-len = <1>;
+ vsync-active = <0>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ yellow1-led {
+ label = "zylonite:yellow:1";
+ gpios = <&ext_gpio1 25 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ yellow2-led {
+ label = "zylonite:yellow:2";
+ gpios = <&ext_gpio1 26 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 10000>;
+ pwm-names = "backlight";
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = < &pmux_backlight_default >;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Zylonite-Sound-Card";
+ simple-audio-card,format = "ac97";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone",
+ "Microphone", "Headset Microphone",
+ "Microphone", "Handset Microphone",
+ "Speaker", "Multiactor",
+ "Speaker", "Headset Earpiece";
+ simple-audio-card,routing =
+ "Headphone", "HPL", /* Headphone output */
+ "Headphone", "HPR", /* connected to HPL/HPR */
+ "Headset Earpiece", "OUT3", /* On-board earpiece */
+ "MIC2A", "Mic Bias", /* Headphone mic */
+ "Mic Bias", "Headset Microphone", /* Headphone mic */
+ "MIC1", "Mic Bias", /* On-board mic */
+ "Mic Bias", "Handset Microphone", /* On-board mic */
+ "Multiactor", "SPKL", /* Multiactor differentially */
+ "Multiactor", "SPKR"; /* connected over SPKL/SPKR */
+
+ simple-audio-card,dai-link@0 { /* AC97 */
+ format = "ac97";
+ cpu {
+ sound-dai = <&ac97 0>;
+ };
+ codec {
+ sound-dai = <&wm9713 0>;
+ };
+ plat {
+ sound-dai = <&pxa_pcm_audio 0>;
+ };
+ };
+ simple-audio-card,dai-link@1 { /* AC97 Aux */
+ format = "ac97";
+ cpu {
+ sound-dai = <&ac97 1>;
+ };
+ codec {
+ sound-dai = <&wm9713 1>;
+ };
+ plat {
+ sound-dai = <&pxa_pcm_audio 0>;
+ };
+ };
+ simple-audio-card,dai-link@2 { /* AC97 Voice */
+ format = "i2s";
+ cpu {
+ sound-dai = <&ssp_dai0>;
+ };
+ codec {
+ sound-dai = <&wm9713 2>;
+ };
+ plat {
+ sound-dai = <&pxa_pcm_audio 0>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ status = "okay";
+
+ pmux_i2c_default: i2c-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(21) MFP_AF1
+ MFP_PIN_PXA310(22) MFP_AF1 >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+
+ pmux_pca9539_1_default: pca9539-1-default {
+ pinctrl-single,pins = < MFP_PIN_PXA310(18) MFP_AF0 >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+
+ pmux_pca9539_2_default: pca9539-2-default {
+ pinctrl-single,pins = < MFP_PIN_PXA310(19) MFP_AF0 >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+
+ pmux_lcd_ds01x_default: lcd-ds01x-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(54) MFP_AF1 /* LDD_0 */
+ MFP_PIN_PXA310(55) MFP_AF1 /* LDD_1 */
+ MFP_PIN_PXA310(56) MFP_AF1 /* LDD_2 */
+ MFP_PIN_PXA310(57) MFP_AF1 /* LDD_3 */
+ MFP_PIN_PXA310(58) MFP_AF1 /* LDD_4 */
+ MFP_PIN_PXA310(59) MFP_AF1 /* LDD_5 */
+ MFP_PIN_PXA310(60) MFP_AF1 /* LDD_6 */
+ MFP_PIN_PXA310(61) MFP_AF1 /* LDD_7 */
+ MFP_PIN_PXA310(62) MFP_AF1 /* LDD_8 */
+ MFP_PIN_PXA310(63) MFP_AF1 /* LDD_9 */
+ MFP_PIN_PXA310(64) MFP_AF1 /* LDD_10 */
+ MFP_PIN_PXA310(65) MFP_AF1 /* LDD_11 */
+ MFP_PIN_PXA310(66) MFP_AF1 /* LDD_12 */
+ MFP_PIN_PXA310(67) MFP_AF1 /* LDD_13 */
+ MFP_PIN_PXA310(68) MFP_AF1 /* LDD_14 */
+ MFP_PIN_PXA310(69) MFP_AF1 /* LDD_15 */
+ MFP_PIN_PXA310(72) MFP_AF1 /* FCLK */
+ MFP_PIN_PXA310(73) MFP_AF1 /* LCLK */
+ MFP_PIN_PXA310(75) MFP_AF1 /* BIAS */
+ MFP_PIN_PXA310(76) MFP_AF2 /* VSYNC */
+ MFP_PIN_PXA310(127) MFP_AF1 /* CS_N */
+ >;
+ pinctrl-single,drive-strength = MFP_DS01X;
+ };
+
+ pmux_lcd_ds02x_default: lcd-ds02x-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(74) MFP_AF1 /* LDD_0 */
+ >;
+ pinctrl-single,drive-strength = MFP_DS02X;
+ };
+
+ pmux_backlight_default: backlight-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(20) MFP_AF1 /* PWM3_OUT */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+
+ pmux_btuart_default: btuart-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(111) MFP_AF1 /* UART2_RTS */
+ MFP_PIN_PXA310(113) MFP_AF1 /* UART2_TXD */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+ pmux_btuart_wak1_default: btuart-wake-fall-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(112) MFP_AF1 /* UART2_RXD */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT | MFP_LPM_EDGE_FALL);
+ };
+ pmux_btuart_wak2_default: btuart-wake-both-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(114) MFP_AF1 /* UART2_CTS */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT | MFP_LPM_EDGE_BOTH);
+ };
+
+ pmux_ffuart_default: ffuart-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(99) MFP_AF1 /* UART1_RXD */
+ MFP_PIN_PXA310(100) MFP_AF1 /* UART1_TXD */
+ MFP_PIN_PXA310(101) MFP_AF1 /* UART1_CTS */
+ MFP_PIN_PXA310(106) MFP_AF1 /* UART1_RTS */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+ pmux_ffuart_wak1_default: ffuart-wake-both-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(99) MFP_AF1 /* UART1_RXD */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_EDGE_BOTH);
+ };
+
+ pmux_lan_default: lan-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(2) MFP_AF1 /* nCS3 */
+ MFP_PIN_PXA310(102) MFP_AF0 /* GPIO 102 */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+
+ pmux_mmc1_default: mmc1-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(3) MFP_AF4 /* MMC1_DAT0 */
+ MFP_PIN_PXA310(5) MFP_AF4 /* MMC1_DAT2 */
+ MFP_PIN_PXA310(6) MFP_AF4 /* MMC1_DAT3 */
+ MFP_PIN_PXA310(7) MFP_AF4 /* MMC1_CLK */
+ MFP_PIN_PXA310(8) MFP_AF4 /* MMC1_CMD */
+ MFP_PIN_PXA310(15) MFP_AF0 /* CMD1 default as GPIO for slot 0 */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+ };
+ pmux_mmc1_wak_default: mmc1-wake-both-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(4) MFP_AF4 /* MMC1_DAT1 */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_EDGE_BOTH);
+ };
+
+ pmux_mmc2_default: mmc2-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(9) MFP_AF4 /* MMC2_DAT0 */
+ MFP_PIN_PXA310(11) MFP_AF4 /* MMC2_DAT2 */
+ MFP_PIN_PXA310(12) MFP_AF4 /* MMC2_DAT3 */
+ MFP_PIN_PXA310(13) MFP_AF4 /* MMC2_CLK */
+ MFP_PIN_PXA310(14) MFP_AF4 /* MMC2_CMD */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ };
+ pmux_mmc2_wak_default: mmc2-wake-both-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(10) MFP_AF4 /* MMC2_DAT1 */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_EDGE_BOTH | MFP_LPM_PULL_HIGH);
+ };
+
+ pmux_mmc3_default: mmc3-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(256 + 7) MFP_AF1 /* MMC3_DAT0 */
+ MFP_PIN_PXA310(256 + 9) MFP_AF1 /* MMC3_DAT2 */
+ MFP_PIN_PXA310(256 + 10) MFP_AF1 /* MMC3_DAT3 */
+ MFP_PIN_PXA310(103) MFP_AF2 /* MMC3_CLK */
+ MFP_PIN_PXA310(105) MFP_AF2 /* MMC3_CMD */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+ pmux_mmc3_wak_default: mmc3-wake-both-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(256 + 8) MFP_AF1 /* MMC3_DAT1 */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_EDGE_BOTH);
+ };
+
+ pmux_usbh_default: usbh-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(256 + 0) MFP_AF1 /* USBH_PEN */
+ MFP_PIN_PXA310(256 + 1) MFP_AF1 /* USBH_PWR */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+
+ pmux_keypad_out_default: keypad-out-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(121) MFP_AF1 /* MKOUT_0 */
+ MFP_PIN_PXA310(122) MFP_AF1 /* MKOUT_1 */
+ MFP_PIN_PXA310(123) MFP_AF1 /* MKOUT_2 */
+ MFP_PIN_PXA310(124) MFP_AF1 /* MKOUT_3 */
+ MFP_PIN_PXA310(125) MFP_AF1 /* MKOUT_4 */
+ MFP_PIN_PXA310(256 + 5) MFP_AF1 /* MKOUT_5 */
+ MFP_PIN_PXA310(256 + 6) MFP_AF1 /* MKOUT_6 */
+ MFP_PIN_PXA310(256 + 7) MFP_AF1 /* MKOUT_7 */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+ pmux_keypad_wak_default: keypad-wake-both-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(107) MFP_AF2 /* KP_DKIN_0 */
+ MFP_PIN_PXA310(108) MFP_AF2 /* KP_DKIN_0 */
+ MFP_PIN_PXA310(115) MFP_AF1 /* KP_MKIN_0 */
+ MFP_PIN_PXA310(116) MFP_AF1 /* KP_MKIN_1 */
+ MFP_PIN_PXA310(117) MFP_AF1 /* KP_MKIN_2 */
+ MFP_PIN_PXA310(118) MFP_AF1 /* KP_MKIN_3 */
+ MFP_PIN_PXA310(119) MFP_AF1 /* KP_MKIN_4 */
+ MFP_PIN_PXA310(120) MFP_AF1 /* KP_MKIN_5 */
+ MFP_PIN_PXA310(256 + 2) MFP_AF1 /* KP_MKIN_6 */
+ MFP_PIN_PXA310(256 + 3) MFP_AF1 /* KP_MKIN_7 */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT | MFP_LPM_EDGE_BOTH);
+ };
+
+ pmux_ac97_default: ac97-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(23) MFP_AF1 /* AC97_nACRESET */
+ MFP_PIN_PXA310(24) MFP_AF1 /* AC97_SYSCLK */
+ MFP_PIN_PXA310(29) MFP_AF1 /* AC97_BITCLK */
+ MFP_PIN_PXA310(25) MFP_AF1 /* AC97_SDATA_IN_0 */
+ MFP_PIN_PXA310(27) MFP_AF1 /* AC97_SDATA_OUT */
+ MFP_PIN_PXA310(28) MFP_AF1 /* AC97_SYNC */
+ MFP_PIN_PXA310(17) MFP_AF0 /* GPIO unused */
+ >;
+ pinctrl-single,drive-strength = MFP_DS03X;
+ };
+ pmux_wm9713_default: wm9713-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(26) MFP_AF0 /* WM9713 IRQ */
+ >;
+ };
+
+ pmux_ssp3_low_default: ssp3-low-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(92) MFP_AF1 /* SSP3_FRM */
+ MFP_PIN_PXA310(93) MFP_AF1 /* SSP3_TXD */
+ >;
+ pinctrl-single,drive-strength = MFP_DS08X;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_LOW);
+ };
+ pmux_ssp3_float_default: ssp3-float-default {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA310(91) MFP_AF1 /* SSP3_SCLK */
+ MFP_PIN_PXA310(94) MFP_AF1 /* SSP3_RXD */
+ >;
+ pinctrl-single,drive-strength = MFP_DS08X;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+};
--
2.1.4
Powered by blists - more mailing lists