| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <bd99b2fb93c4c7da52ceb70a43dafded76fff974.1456698862.git.henry@nitronetworks.nl>
Date: Mon, 29 Feb 2016 00:13:27 +0100
From: Henry Paulissen <henry@...ronetworks.nl>
To: linux-sunxi@...glegroups.com
Cc: Linus Walleij <linus.walleij@...aro.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>,
Hongzhou Yang <hongzhou.yang@...iatek.com>,
Lee Jones <lee@...nel.org>, Fabian Frederick <fabf@...net.be>,
linux-gpio@...r.kernel.org (open list:PIN CONTROL SUBSYSTEM),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Allwinner
sunXi SoC support), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 2/2] pinctrl: sunxi: Change mux setting on PI irq pins
While I was testing irq's on the cubietruck I found a couple of
not working irq pins. Further diving into the problem it opened
up a mess called "manual".
This so called manual (A20 user manual v1.3 dated 2014-10-10) says:
Pin overview:
Page 237: EINT26 is on mux 5.
Page 288: EINT26 is on mux 6.
The manual is so contradicting that further tests had to be made
to see which of the 2 statements where correct.
This patch is based on actual outcome of these tests and not what
the manual says.
Test procedure used:
Connect a 1 pulse per second (GPS) line to the pin.
echo pin### > /sys/class/gpio/export
echo in > /sys/class/gpio/gpio###/direction
echo rising > /sys/class/gpio/gpio###/edge
Check /proc/interrupts if a irq was attached and if irq's where
received.
Hardware used:
Henry Paulissen: Cubietruck
Andere Przywara: BananaPi M1
Tested-by: Andre Przywara <andre.przywara@....com>
Reviewed-by: Andre Przywara <andre.przywara@....com>
Signed-off-by: Henry Paulissen <henry@...ronetworks.nl>
---
drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
index 25748b4..435ad30 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
@@ -956,65 +956,65 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* CS0 */
SUNXI_FUNCTION(0x3, "uart5"), /* TX */
- SUNXI_FUNCTION_IRQ(0x5, 22)), /* EINT22 */
+ SUNXI_FUNCTION_IRQ(0x6, 22)), /* EINT22 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* CLK */
SUNXI_FUNCTION(0x3, "uart5"), /* RX */
- SUNXI_FUNCTION_IRQ(0x5, 23)), /* EINT23 */
+ SUNXI_FUNCTION_IRQ(0x6, 23)), /* EINT23 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 12),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* MOSI */
SUNXI_FUNCTION(0x3, "uart6"), /* TX */
SUNXI_FUNCTION(0x4, "clk_out_a"), /* CLK_OUT_A */
- SUNXI_FUNCTION_IRQ(0x5, 24)), /* EINT24 */
+ SUNXI_FUNCTION_IRQ(0x6, 24)), /* EINT24 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* MISO */
SUNXI_FUNCTION(0x3, "uart6"), /* RX */
SUNXI_FUNCTION(0x4, "clk_out_b"), /* CLK_OUT_B */
- SUNXI_FUNCTION_IRQ(0x5, 25)), /* EINT25 */
+ SUNXI_FUNCTION_IRQ(0x6, 25)), /* EINT25 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* CS1 */
SUNXI_FUNCTION(0x3, "ps2"), /* SCK1 */
SUNXI_FUNCTION(0x4, "timer4"), /* TCLKIN0 */
- SUNXI_FUNCTION_IRQ(0x5, 26)), /* EINT26 */
+ SUNXI_FUNCTION_IRQ(0x6, 26)), /* EINT26 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 15),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CS1 */
SUNXI_FUNCTION(0x3, "ps2"), /* SDA1 */
SUNXI_FUNCTION(0x4, "timer5"), /* TCLKIN1 */
- SUNXI_FUNCTION_IRQ(0x5, 27)), /* EINT27 */
+ SUNXI_FUNCTION_IRQ(0x6, 27)), /* EINT27 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 16),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CS0 */
SUNXI_FUNCTION(0x3, "uart2"), /* RTS */
- SUNXI_FUNCTION_IRQ(0x5, 28)), /* EINT28 */
+ SUNXI_FUNCTION_IRQ(0x6, 28)), /* EINT28 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 17),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CLK */
SUNXI_FUNCTION(0x3, "uart2"), /* CTS */
- SUNXI_FUNCTION_IRQ(0x5, 29)), /* EINT29 */
+ SUNXI_FUNCTION_IRQ(0x6, 29)), /* EINT29 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 18),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* MOSI */
SUNXI_FUNCTION(0x3, "uart2"), /* TX */
- SUNXI_FUNCTION_IRQ(0x5, 30)), /* EINT30 */
+ SUNXI_FUNCTION_IRQ(0x6, 30)), /* EINT30 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 19),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* MISO */
SUNXI_FUNCTION(0x3, "uart2"), /* RX */
- SUNXI_FUNCTION_IRQ(0x5, 31)), /* EINT31 */
+ SUNXI_FUNCTION_IRQ(0x6, 31)), /* EINT31 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 20),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
--
2.5.0
Powered by blists - more mailing lists