[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56D4017B.9010106@arm.com>
Date: Mon, 29 Feb 2016 08:29:47 +0000
From: Marc Zyngier <marc.zyngier@....com>
To: Jason Cooper <jason@...edaemon.net>,
Sergei Ianovich <ynvich@...il.com>
Cc: linux-kernel@...r.kernel.org, Arnd Bergmann <arnd@...db.de>,
Rob Herring <robh@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>
Subject: Re: [PATCH v6] arm: pxa: support ICP DAS LP-8x4x FPGA irq
On 27/02/16 17:41, Jason Cooper wrote:
> Hi Sergei,
>
> Marc, Rob, please see below.
>
> On Sat, Feb 27, 2016 at 06:56:01PM +0300, Sergei Ianovich wrote:
>>
>
> nit: Subject line of the patch should match 'irqchip/lp8841: [A-Z].*'
>
>> ICP DAS LP-8x4x contains FPGA chip. The chip functions as an interrupt
>> source providing 16 additional interrupts among other things. The
>> interrupt lines are muxed to a GPIO pin of a 2nd level PXA-GPIO
>> interrupt controller. GPIO pins of the 2nd level controller are in turn
>> muxed to a CPU interrupt line.
>>
>> Until pxa is completely converted to device tree, it is impossible
>> to use IRQCHIP_DECLARE() and the irqdomain needs to added manually.
>> Drivers for the on-CPU IRQs and GPIO-IRQs are loaded using
>> postcore_initcall(). We need to have all irq domain drivers loaded prior
>> to DT parsing in order to allow normal initialization of IRQ resources
>> with DT.
>>
>> Signed-off-by: Sergei Ianovich <ynvich@...il.com>
>> Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
>
> nit: From here, down should be below the '---' so that it isn't a part
> of the commit log. We add a link to the commit log that points to the
> patch submission in the mailinglist archives. So curious folks have
> quick access to this info.
>
>> CC: Arnd Bergmann <arnd@...db.de>
>> CC: Rob Herring <robh@...nel.org>
>> CC: Marc Zyngier <marc.zyngier@....com>
>>
>> v5..v6
>> fixes according to Rob Herring review comments:
>> * drop wildcards in binding and file names
>> * rename alias 'fpga'->'fpga_irq'
>>
>> fixes according to Marc Zyngier review comments:
>> * use writeb/readb not iowrite8/ioread8
>> * redefine 2nd mask using inversion on 1st
>> * add comments
>>
>> v4..v5
>> * constify struct of_device_id
>> * drop irq number from handler signature
>>
>> v3.2..v4
>> * move DTS binding to a different patch (8/21)
>>
>> v3.1..v3.2
>> fixes to apply Linus Walleij's "Reviewed-by":
>> * add kerneldoc comment for state container struct
>> * rename irq -> hwirq for clarity
>> * drop overzealous error checks from the hotpaths
>>
>> v3..v3.1
>> fixes according to Linus Walleij review comments:
>> * update commit message
>> * use state container instead of global variables
>> * get hardware irq nums from irq_data, don't calculate them
>> * use BIT() macro
>> * add defines for system irq register masks
>> * replace cycle control variable with break
>> * use better names for resource variables
>> * add a linear domain instead of a legacy one
>> * use irq_create_mapping() instead of irq_alloc_desc()
>>
>> v2..v3
>> * no changes (except number 09/16 -> 11/21)
>>
>> v0..v2
>> * extract irqchip and move to drivers/irqchip/
>> * use device tree
>> * use devm helpers where possible
>
>
>> ---
>
> iow, it should be moved here.
>
>> .../interrupt-controller/icpdas-lp8x4x-irq.txt | 49 ++++
>> drivers/irqchip/Kconfig | 5 +
>> drivers/irqchip/Makefile | 1 +
>> drivers/irqchip/irq-lp8841.c | 246 +++++++++++++++++++++
>> 4 files changed, 301 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/icpdas-lp8x4x-irq.txt
>> create mode 100644 drivers/irqchip/irq-lp8841.c
>
> I don't seem to have the previous versions, and their threads, in my
> email archive. From the changelog, it looks like Marc and Rob have been
> reviewing this most recently.
>
> If you guys could give me an Acked-by/Reviewed-by, I'll go ahead and
> queue this up for v4.6.
>
> I'll fix up the Subject line and the commit log when I bring it in.
> I'll be adding the tags anyway. No need to resubmit.
Looks OK to me:
Acked-by: Marc Zyngier <marc.zyngier@....com>
M.
--
Jazz is not dead. It just smells funny...
Powered by blists - more mailing lists