[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1456762702-23713-1-git-send-email-gabriel.fernandez@linaro.org>
Date: Mon, 29 Feb 2016 17:18:22 +0100
From: Gabriel Fernandez <gabriel.fernandez@...aro.org>
To: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Phil Reid <preid@...ctromag.com.au>, davem@...emloft.net,
Joachim Eastwood <manabian@...il.com>,
Vince Bridgers <vbridger@...nsource.altera.com>,
Gabriel Fernandez <gabriel.fernandez@...aro.org>,
Mathieu Olivari <mathieu@...eaurora.org>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
alexandre.torgue@...com, maxime.coquelin@...com
Subject: [PATCH] stmmac: Fix 'eth0: No PHY found' regression
This patch manages the case when you have an Ethernet MAC with
a "fixed link", and not connected to a normal MDIO-managed PHY device.
The test of phy_bus_name was not helpful because it was never affected
and replaced by the mdio test node.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...aro.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 11 +----------
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 ++++++++-
include/linux/stmmac.h | 1 +
3 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 0faf163..efb54f3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -199,21 +199,12 @@ int stmmac_mdio_register(struct net_device *ndev)
struct stmmac_priv *priv = netdev_priv(ndev);
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
int addr, found;
- struct device_node *mdio_node = NULL;
- struct device_node *child_node = NULL;
+ struct device_node *mdio_node = priv->plat->mdio_node;
if (!mdio_bus_data)
return 0;
if (IS_ENABLED(CONFIG_OF)) {
- for_each_child_of_node(priv->device->of_node, child_node) {
- if (of_device_is_compatible(child_node,
- "snps,dwmac-mdio")) {
- mdio_node = child_node;
- break;
- }
- }
-
if (mdio_node) {
netdev_dbg(ndev, "FOUND MDIO subnode\n");
} else {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 6a52fa1..4514ba7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -110,6 +110,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
struct device_node *np = pdev->dev.of_node;
struct plat_stmmacenet_data *plat;
struct stmmac_dma_cfg *dma_cfg;
+ struct device_node *child_node = NULL;
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
if (!plat)
@@ -140,13 +141,19 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
plat->phy_node = of_node_get(np);
}
+ for_each_child_of_node(np, child_node)
+ if (of_device_is_compatible(child_node, "snps,dwmac-mdio")) {
+ plat->mdio_node = child_node;
+ break;
+ }
+
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name)
+ if ((plat->phy_node && !of_phy_is_fixed_link(np)) || !plat->mdio_node)
plat->mdio_bus_data = NULL;
else
plat->mdio_bus_data =
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index eead8ab..881a79d 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -100,6 +100,7 @@ struct plat_stmmacenet_data {
int interface;
struct stmmac_mdio_bus_data *mdio_bus_data;
struct device_node *phy_node;
+ struct device_node *mdio_node;
struct stmmac_dma_cfg *dma_cfg;
int clk_csr;
int has_gmac;
--
1.9.1
Powered by blists - more mailing lists