[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1971048.7T2zBta3A8@diego>
Date: Tue, 01 Mar 2016 11:03:26 +0100
From: Heiko Stübner <heiko@...ech.de>
To: Caesar Wang <wxt@...k-chips.com>
Cc: edubezval@...il.com, huangtao@...k-chips.com,
Michael Turquette <mturquette@...libre.com>,
linux-pm@...r.kernel.org, Stephen Boyd <sboyd@...eaurora.org>,
zhangqing@...k-chips.com, linux-kernel@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Jeffy Chen <jeffy.chen@...k-chips.com>,
Zhang Rui <rui.zhang@...el.com>, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [RESEND PATCH 7/8] ARM: dts: rockchip: add the thermal main info found on rk3228
Am Montag, 15. Februar 2016, 15:33:32 schrieb Caesar Wang:
> This patch adds the thermal needed main information for rk3228 SoCS.
>
> Basically has the following content:
>
> 1) TSADC controller:
> Add the needed attributes for rk3036 TSADC controller.
>
> Especially for the TSHUT, in some cases if we are unable to shut it down
> in orderly fashion (says: kernel is stuck holding a lock or similar), then
> hardware TSHUT will reset it.
> If the temperature is over 95C over a period of time the thermal shutdown
> of the tsadc is invoked with can either reset the entire chip via the CRU,
> or notify the PMIC via a GPIO. This should be set in the specific board.
>
> 2) Thermal zones:
> Add the needed device mode for thermal generic framework.
> Detail in Documentation/devicetree/bindings/thermal/thermal.txt.
>
> Signed-off-by: Caesar Wang <wxt@...k-chips.com>
applied to my dts32 branch for 4.6
Thanks
Heiko
Powered by blists - more mailing lists