[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56D59100.3060803@ti.com>
Date: Tue, 1 Mar 2016 14:54:24 +0200
From: Tero Kristo <t-kristo@...com>
To: Tony Lindgren <tony@...mide.com>,
Franklin S Cooper Jr <fcooper@...com>
CC: <paul@...an.com>, <vigneshr@...com>, <linux-pwm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-clk@...r.kernel.org>
Subject: Re: [PATCH v3 3/5] ARM: dts: DRA7: Add TBCLK for PWMSS
On 03/01/2016 01:23 AM, Tony Lindgren wrote:
> * Franklin S Cooper Jr <fcooper@...com> [160225 14:37]:
>> From: Vignesh R <vigneshr@...com>
>>
>> tbclk is used by ehrpwm to generate PWM waveform on DRA7 SoC. Add Linux
>> clock to control ehrpwm tbclk.
>> The TRM says, tbclk is derived from SYSCLKOUT. SYSCLKOUT is nothing but
>> ehrpwm functional clock derived from the gateable interface and
>> functional clock of PWMSS(l4_root_clk_div).
>> Refer AM57x TRM SPRUHZ6[1], October 2014, Table 29-4 and Section 29.2.2.1,
>> Table 29-19 and the NOTE at the end of the table.
>>
>> [1] www.ti.com/lit/ug/spruhz6/spruhz6.pdf
>
> Applying this into omap-for-v4.6/dt thanks.
>
> Note for Tero, let's plan on getting rid of the duplicate
> reg entries by using the standard clock output offset within
> the clock register. I think we should easily be able to add
> a binding for this and then deprecate the overlapping reg
> entries.
Yeah, we have been discussing this offline a bit, but haven't had time
to look at this. I believe the hwmod clock conversion is of higher
priority still.
-Tero
>
> Regards,
>
> Tony
>
>> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> @@ -2146,4 +2146,28 @@
>> ti,bit-shift = <0>;
>> reg = <0x558>;
>> };
>> +
>> + ehrpwm0_tbclk: ehrpwm0_tbclk {
>> + #clock-cells = <0>;
>> + compatible = "ti,gate-clock";
>> + clocks = <&l4_root_clk_div>;
>> + ti,bit-shift = <20>;
>> + reg = <0x0558>;
>> + };
>> +
>> + ehrpwm1_tbclk: ehrpwm1_tbclk {
>> + #clock-cells = <0>;
>> + compatible = "ti,gate-clock";
>> + clocks = <&l4_root_clk_div>;
>> + ti,bit-shift = <21>;
>> + reg = <0x0558>;
>> + };
>> +
>> + ehrpwm2_tbclk: ehrpwm2_tbclk {
>> + #clock-cells = <0>;
>> + compatible = "ti,gate-clock";
>> + clocks = <&l4_root_clk_div>;
>> + ti,bit-shift = <22>;
>> + reg = <0x0558>;
>> + };
>> };
>> --
>> 2.7.0
>>
Powered by blists - more mailing lists