linux-kernel - [PATCH 3/3] ARM: dts: at91: sama5d2 Xplained: add leds node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 1 Mar 2016 15:02:37 +0100
From:	Nicolas Ferre <nicolas.ferre@...el.com>
To:	<linux-arm-kernel@...ts.infradead.org>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
CC:	Boris BREZILLON <boris.brezillon@...e-electrons.com>,
	Ludovic Desroches <ludovic.desroches@...el.com>,
	Cyrille Pitchen <cyrille.pitchen@...el.com>,
	Wenyou Yang <wenyou.yang@...el.com>,
	Songjun Wu <songjun.wu@...el.com>,
	<linux-kernel@...r.kernel.org>,
	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>,
	Nicolas Ferre <nicolas.ferre@...el.com>
Subject: [PATCH 3/3] ARM: dts: at91: sama5d2 Xplained: add leds node

From: Wenyou Yang <wenyou.yang@...el.com>

Add the three leds on the sama5d2 Xplained board with their pinctrl node.
The blue led is positioned with the "heartbeat" trigger.

Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
[nicolas.ferre@...el.com: add commit message and adapt to newer kernel]
Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
---
 arch/arm/boot/dts/at91-sama5d2_xplained.dts | 30 +++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index d20d4033d64c..2636b9e2d124 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -307,6 +307,13 @@
 					bias-pull-up;
 				};
 
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB0__GPIO>,
+						 <PIN_PB5__GPIO>,
+						 <PIN_PB6__GPIO>;
+					bias-pull-up;
+				};
+
 				pinctrl_macb0_default: macb0_default {
 					pinmux = <PIN_PB14__GTXCK>,
 						 <PIN_PB15__GTXEN>,
@@ -418,4 +425,27 @@
 			linux,code = <0x104>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		red {
+			label = "red";
+			gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
 };
-- 
2.1.3