linux-kernel - [PATCH 4.4 126/342] irqchip/omap-intc: Add support for spurious irq handling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20160301234532.021675963@linuxfoundation.org>
Date:	Tue, 01 Mar 2016 23:54:44 +0000
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	<linux-kernel@...r.kernel.org>
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	<stable@...r.kernel.org>, Sekhar Nori <nsekhar@...com>,
	Tony Lindgren <tony@...mide.com>,
	John Ogness <john.ogness@...utronix.de>,
	Felipe Balbi <balbi@...com>,
	Jason Cooper <jason@...edaemon.net>,
	Marc Zyngier <marc.zyngier@....com>,
	Thomas Gleixner <tglx@...utronix.de>
Subject: [PATCH 4.4 126/342] irqchip/omap-intc: Add support for spurious irq handling

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sekhar Nori <nsekhar@...com>

commit d3b421cd07e4c0d4d6c0bbd55ca169c054fc081d upstream.

Under some conditions, irq sorting procedure used by INTC can go wrong
resulting in a spurious irq getting reported.

If this condition is not handled, it results in endless stream of:

    unexpected IRQ trap at vector 00

messages from ack_bad_irq()

Handle the spurious interrupt condition in omap-intc driver to prevent this.

Measurements using kernel function profiler on AM335x EVM running at 720MHz
show that after this patch omap_intc_handle_irq() takes about 37.4us against
34us before this patch.

Signed-off-by: Sekhar Nori <nsekhar@...com>
Acked-by: Tony Lindgren <tony@...mide.com>
Cc: John Ogness <john.ogness@...utronix.de>
Cc: Felipe Balbi <balbi@...com>
Cc: Jason Cooper <jason@...edaemon.net>
Cc: Marc Zyngier <marc.zyngier@....com>
Link: http://lkml.kernel.org/r/9c78a6db02ac55f7af7371b417b6e414d2c3095b.1450188128.git.nsekhar@ti.com
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/irqchip/irq-omap-intc.c |   27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

--- a/drivers/irqchip/irq-omap-intc.c
+++ b/drivers/irqchip/irq-omap-intc.c
@@ -47,6 +47,7 @@
 #define INTC_ILR0		0x0100
 
 #define ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
+#define SPURIOUSIRQ_MASK	(0x1ffffff << 7)
 #define INTCPS_NR_ILR_REGS	128
 #define INTCPS_NR_MIR_REGS	4
 
@@ -330,11 +331,35 @@ static int __init omap_init_irq(u32 base
 static asmlinkage void __exception_irq_entry
 omap_intc_handle_irq(struct pt_regs *regs)
 {
+	extern unsigned long irq_err_count;
 	u32 irqnr;
 
 	irqnr = intc_readl(INTC_SIR);
+
+	/*
+	 * A spurious IRQ can result if interrupt that triggered the
+	 * sorting is no longer active during the sorting (10 INTC
+	 * functional clock cycles after interrupt assertion). Or a
+	 * change in interrupt mask affected the result during sorting
+	 * time. There is no special handling required except ignoring
+	 * the SIR register value just read and retrying.
+	 * See section 6.2.5 of AM335x TRM Literature Number: SPRUH73K
+	 *
+	 * Many a times, a spurious interrupt situation has been fixed
+	 * by adding a flush for the posted write acking the IRQ in
+	 * the device driver. Typically, this is going be the device
+	 * driver whose interrupt was handled just before the spurious
+	 * IRQ occurred. Pay attention to those device drivers if you
+	 * run into hitting the spurious IRQ condition below.
+	 */
+	if (unlikely((irqnr & SPURIOUSIRQ_MASK) == SPURIOUSIRQ_MASK)) {
+		pr_err_once("%s: spurious irq!\n", __func__);
+		irq_err_count++;
+		omap_ack_irq(NULL);
+		return;
+	}
+
 	irqnr &= ACTIVEIRQ_MASK;
-	WARN_ONCE(!irqnr, "Spurious IRQ ?\n");
 	handle_domain_irq(domain, irqnr, regs);
 }