linux-kernel - [PATCH 4.4 084/342] clocksource/drivers/vt8500: Increase the minimum delta

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20160301234530.706584768@linuxfoundation.org>
Date:	Tue, 01 Mar 2016 23:54:27 +0000
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	<linux-kernel@...r.kernel.org>
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	<stable@...r.kernel.org>, Russell King <linux@....linux.org.uk>,
	Alexey Charkov <alchark@...il.com>,
	Roman Volkov <rvolkov@...os.org>,
	Daniel Lezcano <daniel.lezcano@...aro.org>
Subject: [PATCH 4.4 084/342] clocksource/drivers/vt8500: Increase the minimum delta

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roman Volkov <rvolkov@...os.org>

commit f9eccf24615672896dc13251410c3f2f33a14f95 upstream.

The vt8500 clocksource driver declares itself as capable to handle the
minimum delay of 4 cycles by passing the value into
clockevents_config_and_register(). The vt8500_timer_set_next_event()
requires the passed cycles value to be at least 16. The impact is that
userspace hangs in nanosleep() calls with small delay intervals.

This problem is reproducible in Linux 4.2 starting from:
c6eb3f70d448 ('hrtimer: Get rid of hrtimer softirq')

>>From Russell King, more detailed explanation:

"It's a speciality of the StrongARM/PXA hardware. It takes a certain
number of OSCR cycles for the value written to hit the compare registers.
So, if a very small delta is written (eg, the compare register is written
with a value of OSCR + 1), the OSCR will have incremented past this value
before it hits the underlying hardware. The result is, that you end up
waiting a very long time for the OSCR to wrap before the event fires.

So, we introduce a check in set_next_event() to detect this and return
-ETIME if the calculated delta is too small, which causes the generic
clockevents code to retry after adding the min_delta specified in
clockevents_config_and_register() to the current time value.

min_delta must be sufficient that we don't re-trip the -ETIME check - if
we do, we will return -ETIME, forward the next event time, try to set it,
return -ETIME again, and basically lock the system up. So, min_delta
must be larger than the check inside set_next_event(). A factor of two
was chosen to ensure that this situation would never occur.

The PXA code worked on PXA systems for years, and I'd suggest no one
changes this mechanism without access to a wide range of PXA systems,
otherwise they're risking breakage."

Cc: Russell King <linux@....linux.org.uk>
Acked-by: Alexey Charkov <alchark@...il.com>
Signed-off-by: Roman Volkov <rvolkov@...os.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/clocksource/vt8500_timer.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -50,6 +50,8 @@

 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)

+#define MIN_OSCR_DELTA		16
+
 static void __iomem *regbase;

 static cycle_t vt8500_timer_read(struct clocksource *cs)
@@ -80,7 +82,7 @@ static int vt8500_timer_set_next_event(u
 		cpu_relax();
 	writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);

-	if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
+	if ((signed)(alarm - clocksource.read(&clocksource)) <= MIN_OSCR_DELTA)
 		return -ETIME;

 	writel(1, regbase + TIMER_IER_VAL);
@@ -151,7 +153,7 @@ static void __init vt8500_timer_init(str
 		pr_err("%s: setup_irq failed for %s\n", __func__,
 							clockevent.name);
 	clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ,
-					4, 0xf0000000);
+					MIN_OSCR_DELTA * 2, 0xf0000000);
 }

 CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init);