| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1456915848-18868-2-git-send-email-alessio.bogani@elettra.eu>
Date: Wed, 2 Mar 2016 11:50:47 +0100
From: Alessio Igor Bogani <alessio.bogani@...ttra.eu>
To: Scott Wood <oss@...error.net>,
Kumar Gala <galak@...nel.crashing.org>
Cc: linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
Alessio Igor Bogani <alessio.bogani@...ttra.eu>
Subject: [RFC PATCH v2 2/3] powerpc/86xx: Update device tree
Avoid duplication of the interrupt-parent, migrate to 4 interrupt-cells
and set the right clock-frequency for pcie (100 Mhz).
Signed-off-by: Alessio Igor Bogani <alessio.bogani@...ttra.eu>
---
arch/powerpc/boot/dts/fsl/gef_ppc9a.dts | 73 ++++++++------------
arch/powerpc/boot/dts/fsl/gef_sbc310.dts | 79 ++++++++-------------
arch/powerpc/boot/dts/fsl/gef_sbc610.dts | 73 ++++++++------------
arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts | 95 ++++++++++----------------
arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts | 78 ++++++++-------------
arch/powerpc/boot/dts/fsl/sbc8641d.dts | 59 ++++++----------
6 files changed, 169 insertions(+), 288 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
index 83eb0fd..7e4487b 100644
--- a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
@@ -25,6 +25,7 @@
compatible = "gef,ppc9a";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -72,8 +73,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xfef05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe8000000 0x08000000 // Paged Flash 0
@@ -150,9 +150,7 @@
interrupt-controller;
compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
reg = <0x4 0x4000 0x20>;
- interrupts = <0x8
- 0x9>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x9 0 0>;
};
gef_gpio: gpio@7,14000 {
@@ -166,7 +164,6 @@
soc@...00000 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
device_type = "soc";
compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
@@ -181,17 +178,15 @@
mcm@...0 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
- i2c1: i2c@...0 {
+ i2c@...0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
hwmon@48 {
@@ -215,13 +210,12 @@
};
};
- i2c2: i2c@...0 {
+ i2c@...0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
};
@@ -237,32 +231,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -276,8 +266,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
@@ -315,8 +304,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
@@ -340,8 +328,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2a 0x2 0 0>;
};
serial1: serial@...0 {
@@ -350,17 +337,16 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <0x1c 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x1c 0x2 0 0>;
};
mpic: pic@...00 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -369,15 +355,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@...00 {
@@ -390,16 +375,14 @@
pci0: pcie@...08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xfef08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
+ clock-frequency = <100000000>;
+ interrupts = <0x18 0x2 0 0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
index d426dd3..1299011 100644
--- a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
@@ -25,6 +25,7 @@
compatible = "gef,sbc310";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -73,8 +74,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xfef05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe0000000 0x08000000 // Paged Flash 0
@@ -148,9 +148,7 @@
interrupt-controller;
compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
reg = <0x4 0x4000 0x20>;
- interrupts = <0x8
- 0x9>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x9 0 0>;
};
gef_gpio: gpio@4,8000 {
@@ -164,7 +162,6 @@
soc@...00000 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
device_type = "soc";
compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
@@ -179,17 +176,15 @@
mcm@...0 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
- i2c1: i2c@...0 {
+ i2c@...0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
rtc@51 {
@@ -198,13 +193,12 @@
};
};
- i2c2: i2c@...0 {
+ i2c@...0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
hwmon@48 {
@@ -235,32 +229,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -274,8 +264,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
@@ -313,8 +302,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
@@ -338,8 +326,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2a 0x2 0 0>;
};
serial1: serial@...0 {
@@ -348,17 +335,16 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <0x1c 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x1c 0x2 0 0>;
};
mpic: pic@...00 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -367,15 +353,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@...00 {
@@ -388,16 +373,14 @@
pci0: pcie@...08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xfef08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
+ clock-frequency = <100000000>;
+ interrupts = <0x18 0x2 0 0>;
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
@@ -424,16 +407,14 @@
pci1: pcie@...09000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xfef09000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x19 0x2>;
+ clock-frequency = <100000000>;
+ interrupts = <0x19 0x2 0 0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
index 5db3399..3a1f438 100644
--- a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
@@ -25,6 +25,7 @@
compatible = "gef,sbc610";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -72,8 +73,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xfef05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe8000000 0x08000000 // Paged Flash 0
@@ -148,9 +148,7 @@
interrupt-controller;
compatible = "gef,fpga-pic";
reg = <0x4 0x4000 0x20>;
- interrupts = <0x8
- 0x9>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x8 0x9 0 0>;
};
gef_gpio: gpio@7,14000 {
@@ -164,7 +162,6 @@
soc@...00000 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
@@ -179,17 +176,15 @@
mcm@...0 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
- i2c1: i2c@...0 {
+ i2c@...0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
hwmon@48 {
@@ -213,13 +208,12 @@
};
};
- i2c2: i2c@...0 {
+ i2c@...0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2b 0x2 0 0>;
dfsrr;
};
@@ -235,32 +229,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -274,8 +264,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
@@ -313,8 +302,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
@@ -338,8 +326,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x2a 0x2 0 0>;
};
serial1: serial@...0 {
@@ -348,17 +335,16 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <0x1c 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <0x1c 0x2 0 0>;
};
mpic: pic@...00 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -367,15 +353,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@...00 {
@@ -388,16 +373,14 @@
pci0: pcie@...08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xfef08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
+ clock-frequency = <100000000>;
+ interrupts = <0x18 0x2 0 0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
index 662169e..70ed3dc 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
@@ -16,6 +16,7 @@
compatible = "fsl,mpc8641hpcn";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -66,8 +67,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xffe05000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xef800000 0x00800000
2 0 0xffdf8000 0x00008000
@@ -118,8 +118,7 @@
mcm@...0 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
i2c@...0 {
@@ -128,8 +127,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -139,8 +137,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -156,32 +153,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -195,8 +188,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -208,23 +200,19 @@
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <1>;
};
phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <2>;
};
phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <3>;
};
tbi0: tbi-phy@11 {
@@ -244,8 +232,7 @@
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
@@ -273,8 +260,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
@@ -302,8 +288,7 @@
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
@@ -327,8 +312,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@...0 {
@@ -337,16 +321,15 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <28 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <28 2 0 0>;
};
mpic: pic@...00 {
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -361,27 +344,27 @@
compatible = "fsl,srio-msg-unit";
reg = <0x0 0x100>;
interrupts = <
- 53 2 /* msg1_tx_irq */
- 54 2>;/* msg1_rx_irq */
+ 53 2 0 0 /* msg1_tx_irq */
+ 54 2 0 0>;/* msg1_rx_irq */
};
message-unit@100 {
compatible = "fsl,srio-msg-unit";
reg = <0x100 0x100>;
interrupts = <
- 55 2 /* msg2_tx_irq */
- 56 2>;/* msg2_rx_irq */
+ 55 2 0 0 /* msg2_tx_irq */
+ 56 2 0 0>;/* msg2_rx_irq */
};
doorbell-unit@400 {
compatible = "fsl,srio-dbell-unit";
reg = <0x400 0x80>;
interrupts = <
- 49 2 /* bell_outb_irq */
- 50 2>;/* bell_inb_irq */
+ 49 2 0 0 /* bell_outb_irq */
+ 50 2 0 0>;/* bell_inb_irq */
};
port-write-unit@4e0 {
compatible = "fsl,srio-port-write-unit";
reg = <0x4e0 0x20>;
- interrupts = <48 2>;
+ interrupts = <48 2 0 0>;
};
};
@@ -395,16 +378,14 @@
pci0: pcie@...08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
+ clock-frequency = <100000000>;
+ interrupts = <24 2 0 0>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
@@ -545,7 +526,6 @@
0x0 0x00010000>;
isa@1e {
device_type = "isa";
- #interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0 0 0 0>;
@@ -562,8 +542,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <9 2 0 0>;
};
i8042@60 {
@@ -571,8 +550,7 @@
#address-cells = <1>;
reg = <1 0x60 1 1 0x64 1>;
interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
+ interrupt-parent = <&i8259>;
keyboard@0 {
reg = <0>;
@@ -603,16 +581,14 @@
pci1: pcie@...09000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe09000 0x1000>;
bus-range = <0 0xff>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ clock-frequency = <100000000>;
+ interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -644,8 +620,7 @@
rapidio@...c0000 {
reg = <0xffec0000 0x11000>;
compatible = "fsl,srio";
- interrupt-parent = <&mpic>;
- interrupts = <48 2>;
+ interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
index bb575e2..0a2c21f 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
@@ -16,6 +16,7 @@
compatible = "fsl,mpc8641hpcn";
#address-cells = <2>;
#size-cells = <2>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -66,8 +67,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0x0f 0xffe05000 0x0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xf 0xef800000 0x00800000
2 0 0xf 0xffdf8000 0x00008000
@@ -118,8 +118,7 @@
mcm@...0 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
i2c@...0 {
@@ -128,8 +127,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -139,8 +137,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -156,32 +153,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -195,8 +188,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -208,23 +200,19 @@
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <1>;
};
phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <2>;
};
phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
+ interrupts = <10 1 0 0>;
reg = <3>;
};
tbi0: tbi-phy@11 {
@@ -244,8 +232,7 @@
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
@@ -273,8 +260,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
@@ -302,8 +288,7 @@
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
@@ -327,8 +312,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@...0 {
@@ -337,16 +321,15 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <28 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <28 2 0 0>;
};
mpic: pic@...00 {
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
@@ -361,16 +344,14 @@
cell-index = <0>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0x0f 0xffe08000 0x0 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
+ clock-frequency = <100000000>;
+ interrupts = <24 2 0 0>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
@@ -511,7 +492,6 @@
0x0 0x00010000>;
isa@1e {
device_type = "isa";
- #interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0 0 0 0>;
@@ -528,8 +508,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <9 2 0 0>;
};
i8042@60 {
@@ -537,8 +516,7 @@
#address-cells = <1>;
reg = <1 0x60 1 1 0x64 1>;
interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
+ interrupt-parent = <&i8259>;
keyboard@0 {
reg = <0>;
@@ -570,16 +548,14 @@
cell-index = <1>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0x0f 0xffe09000 0x0 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ clock-frequency = <100000000>;
+ interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/fsl/sbc8641d.dts b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
index 68f0ed7..47c83a0 100644
--- a/arch/powerpc/boot/dts/fsl/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
@@ -20,6 +20,7 @@
compatible = "wind,sbc8641";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpic>;
aliases {
ethernet0 = &enet0;
@@ -70,8 +71,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xf8005000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xf0000000 0x00010000 // 64KB EEPROM
@@ -137,8 +137,7 @@
mcm@...0 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
i2c@...0 {
@@ -147,8 +146,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -158,8 +156,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -175,32 +172,28 @@
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -214,8 +207,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -255,8 +247,7 @@
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
@@ -284,8 +275,7 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
@@ -313,8 +303,7 @@
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
@@ -338,8 +327,7 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@...0 {
@@ -348,17 +336,16 @@
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <28 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <28 2 0 0>;
};
mpic: pic@...00 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
@@ -373,16 +360,14 @@
pci0: pcie@...08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf8008000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
+ clock-frequency = <100000000>;
+ interrupts = <24 2 0 0>;
interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -411,16 +396,14 @@
pci1: pcie@...09000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf8009000 0x1000>;
bus-range = <0 0xff>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ clock-frequency = <100000000>;
+ interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
--
2.7.2
Powered by blists - more mailing lists