linux-kernel - [PATCH 2/2] mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu,  3 Mar 2016 18:19:45 +0800
From:	Nicolas Boichat <drinkcat@...omium.org>
To:	Ulf Hansson <ulf.hansson@...aro.org>
Cc:	Matthias Brugger <matthias.bgg@...il.com>,
	Chaotian Jing <chaotian.jing@...iatek.com>,
	Nicolas Boichat <drinkcat@...omium.org>,
	Geert Uytterhoeven <geert@...ux-m68k.org>,
	linux-mmc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
	dianders@...omium.org
Subject: [PATCH 2/2] mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch

We've introduced a new helper in the MMC core:
mmc_regulator_set_vqmmc().  Let's use this in mtk-sd.  Using this new
helper has some advantages:

    1. We get the mmc_regulator_set_vqmmc() behavior of trying to match
       VQMMC and VMMC when the signal voltage is 3.3V.  This ensures max
       compatibility.

    2. We get rid of a few more warnings when probing unsupported
       voltages.

    3. We get rid of some non-mediatek specific code in mtk-sd.

Signed-off-by: Nicolas Boichat <drinkcat@...omium.org>
---

Similar to e0848f5d294c703917260a6228cc08b8be46c527
mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch ,
where I copied the commit message from.

 drivers/mmc/host/mtk-sd.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 07809f4..b17f30d 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1021,26 +1021,19 @@ static void msdc_set_buswidth(struct msdc_host *host, u32 width)
 static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct msdc_host *host = mmc_priv(mmc);
-	int min_uv, max_uv;
 	int ret = 0;
 
 	if (!IS_ERR(mmc->supply.vqmmc)) {
-		if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
-			min_uv = 3300000;
-			max_uv = 3300000;
-		} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
-			min_uv = 1800000;
-			max_uv = 1800000;
-		} else {
+		if (ios->signal_voltage != MMC_SIGNAL_VOLTAGE_330 &&
+		    ios->signal_voltage != MMC_SIGNAL_VOLTAGE_180) {
 			dev_err(host->dev, "Unsupported signal voltage!\n");
 			return -EINVAL;
 		}
 
-		ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
+		ret = mmc_regulator_set_vqmmc(mmc, ios);
 		if (ret) {
-			dev_dbg(host->dev,
-					"Regulator set error %d: %d - %d\n",
-					ret, min_uv, max_uv);
+			dev_dbg(host->dev, "Regulator set error %d (%d)\n",
+				ret, ios->signal_voltage);
 		} else {
 			/* Apply different pinctrl settings for different signal voltage */
 			if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
-- 
2.7.0.rc3.207.g0ac5344