[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Thu, 3 Mar 2016 12:39:56 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org
Cc: Neil Armstrong <narmstrong@...libre.com>
Subject: [PATCH 03/17] dt-bindings: Add PLX Technology RPS IRQ Controller bindings
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
.../bindings/interrupt-controller/plxtech,rps-irq.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt
new file mode 100644
index 0000000..db117a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/plxtech,rps-irq.txt
@@ -0,0 +1,17 @@
+PLX Technology OXNAS SoCs Family RPS Interrupt Controller
+=========================================================
+
+Required properties:
+- compatible: Should be "plxtech,nas782x-rps"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Should be 1
+
+example:
+
+intc: interrupt-controller@0 {
+ compatible = "plxtech,nas782x-rps";
+ interrupt-controller;
+ reg = <0 0x200>;
+ #interrupt-cells = <1>;
+};
--
1.9.1
Powered by blists - more mailing lists