linux-kernel - [PATCH 3.12 083/116] gspca: ov534/topro: prevent a division by 0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <15d2e31eca2d4700a0e21d52df081afd65834653.1457082108.git.jslaby@suse.cz>
Date:	Fri,  4 Mar 2016 10:02:08 +0100
From:	Jiri Slaby <jslaby@...e.cz>
To:	stable@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org, Antonio Ospite <ao2@....it>,
	Hans Verkuil <hans.verkuil@...co.com>,
	Mauro Carvalho Chehab <mchehab@....samsung.com>,
	Jiri Slaby <jslaby@...e.cz>
Subject: [PATCH 3.12 083/116] gspca: ov534/topro: prevent a division by 0

From: Antonio Ospite <ao2@....it>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit dcc7fdbec53a960588f2c40232db2c6466c09917 upstream.

v4l2-compliance sends a zeroed struct v4l2_streamparm in
v4l2-test-formats.cpp::testParmType(), and this results in a division by
0 in some gspca subdrivers:

  divide error: 0000 [#1] SMP
  Modules linked in: gspca_ov534 gspca_main ...
  CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1
  Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS
    ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010
  task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000
  RIP: 0010:[<ffffffffa079bd62>]  [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534]
  RSP: 0018:ffff880095c4fce8  EFLAGS: 00010296
  RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140
  RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000
  RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc
  R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400
  R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000
  FS:  00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0
  Stack:
   ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616
   ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000
   ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016
  Call Trace:
   [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev]
   [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main]
   [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev]
   [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev]
   [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev]
   [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0
   [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90
   [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680
   [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev]
   [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480
   [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80
   [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75
  Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00
    00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7>
    76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f
  RIP  [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534]
   RSP <ffff880095c4fce8>
  ---[ end trace 279710c2c6c72080 ]---

Following what the doc says about a zeroed timeperframe (see
http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html):

  ...
  To reset manually applications can just set this field to zero.

fix the issue by resetting the frame rate to a default value in case of
an unusable timeperframe.

The fix is done in the subdrivers instead of gspca.c because only the
subdrivers have notion of a default frame rate to reset the camera to.

Signed-off-by: Antonio Ospite <ao2@....it>
Reviewed-by: Hans de Goede <hdegoede@...hat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@...co.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@....samsung.com>
Signed-off-by: Jiri Slaby <jslaby@...e.cz>
---
 drivers/media/usb/gspca/ov534.c | 9 +++++++--
 drivers/media/usb/gspca/topro.c | 6 +++++-
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/gspca/ov534.c b/drivers/media/usb/gspca/ov534.c
index 03a33c46ca2c..9a9ad6ba56dd 100644
--- a/drivers/media/usb/gspca/ov534.c
+++ b/drivers/media/usb/gspca/ov534.c
@@ -1489,8 +1489,13 @@ static void sd_set_streamparm(struct gspca_dev *gspca_dev,
 	struct v4l2_fract *tpf = &cp->timeperframe;
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	/* Set requested framerate */
-	sd->frame_rate = tpf->denominator / tpf->numerator;
+	if (tpf->numerator == 0 || tpf->denominator == 0)
+		/* Set default framerate */
+		sd->frame_rate = 30;
+	else
+		/* Set requested framerate */
+		sd->frame_rate = tpf->denominator / tpf->numerator;
+
 	if (gspca_dev->streaming)
 		set_frame_rate(gspca_dev);
 
diff --git a/drivers/media/usb/gspca/topro.c b/drivers/media/usb/gspca/topro.c
index 4cb511ccc5f6..22ea6aefd22f 100644
--- a/drivers/media/usb/gspca/topro.c
+++ b/drivers/media/usb/gspca/topro.c
@@ -4791,7 +4791,11 @@ static void sd_set_streamparm(struct gspca_dev *gspca_dev,
 	struct v4l2_fract *tpf = &cp->timeperframe;
 	int fr, i;
 
-	sd->framerate = tpf->denominator / tpf->numerator;
+	if (tpf->numerator == 0 || tpf->denominator == 0)
+		sd->framerate = 30;
+	else
+		sd->framerate = tpf->denominator / tpf->numerator;
+
 	if (gspca_dev->streaming)
 		setframerate(gspca_dev, v4l2_ctrl_g_ctrl(gspca_dev->exposure));
 
-- 
2.7.2