| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1457098810-11964-4-git-send-email-ldewangan@nvidia.com>
Date: Fri, 4 Mar 2016 19:10:10 +0530
From: Laxman Dewangan <ldewangan@...dia.com>
To: <edubezval@...il.com>, <rui.zhang@...el.com>, <corbet@....net>
CC: <rklein@...dia.com>, <linux-doc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>,
Laxman Dewangan <ldewangan@...dia.com>
Subject: [PATCH 3/3] thermal: max77620: Add thermal driver for reporting junction temp
Maxim Semiconductor Max77620 supports alarm interrupts when
its die temperature crosses 120C and 140C. These threshold
temperatures are not configurable.
Add thermal driver to register PMIC die temperature as thermal
zone sensor and capture the die temperature warning interrupts
to notifying the client.
Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
---
drivers/thermal/Kconfig | 9 +++
drivers/thermal/Makefile | 1 +
drivers/thermal/thermal-max77620.c | 151 +++++++++++++++++++++++++++++++++++++
3 files changed, 161 insertions(+)
create mode 100644 drivers/thermal/thermal-max77620.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 5e7c97a..faba1a3 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -194,6 +194,15 @@ config IMX_THERMAL
cpufreq is used as the cooling device to throttle CPUs when the
passive trip is crossed.
+config MAX77620_THERMAL
+ tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
+ depends on MFD_MAX77620
+ depends on OF
+ help
+ Support for die junction temperature warning alarm for Maxim
+ Semiconductor PMIC MAX77620 device. Device generates alert
+ signal/interrupt when die temperature cross its threshold.
+
config SPEAR_THERMAL
tristate "SPEAr thermal sensor driver"
depends on PLAT_SPEAR || COMPILE_TEST
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 8e9cbc3..c6bc2bd 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
+obj-$(CONFIG_MAX77620_THERMAL) += thermal-max77620.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
diff --git a/drivers/thermal/thermal-max77620.c b/drivers/thermal/thermal-max77620.c
new file mode 100644
index 0000000..846da62
--- /dev/null
+++ b/drivers/thermal/thermal-max77620.c
@@ -0,0 +1,151 @@
+/*
+ * Junction temperature thermal driver for Maxim Max77620.
+ *
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@...dia.com>
+ * Mallikarjun Kasoju <mkasoju@...dia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77620.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define MAX77620_NORMAL_OPERATING_TEMP 100000
+#define MAX77620_TJALARM1_TEMP 120000
+#define MAX77620_TJALARM1_TEMP 140000
+
+struct max77620_therm_info {
+ struct device *dev;
+ struct regmap *rmap;
+ struct thermal_zone_device *tz_device;
+ int irq_tjalarm1;
+ int irq_tjalarm2;
+};
+
+static int max77620_thermal_read_temp(void *data, int *temp)
+{
+ struct max77620_therm_info *mtherm = data;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val);
+ if (ret < 0) {
+ dev_err(mtherm->dev, "Failed to read STATLBT, %d\n", ret);
+ return -EINVAL;
+ }
+
+ if (val & MAX77620_IRQ_TJALRM2_MASK)
+ *temp = MAX77620_TJALARM2_TEMP;
+ else if (val & MAX77620_IRQ_TJALRM1_MASK)
+ *temp = MAX77620_TJALARM1_TEMP;
+ else
+ *temp = MAX77620_NORMAL_OPERATING_TEMP;
+ return 0;
+}
+
+static const struct thermal_zone_of_device_ops max77620_thermal_ops = {
+ .get_temp = max77620_thermal_read_temp,
+};
+
+static irqreturn_t max77620_thermal_irq(int irq, void *data)
+{
+ struct max77620_therm_info *mtherm = data;
+
+ if (irq == mtherm->irq_tjalarm1)
+ dev_warn(mtherm->dev, "Junction Temp Alarm1(120C) occurred\n");
+ else if (irq == mtherm->irq_tjalarm2)
+ dev_warn(mtherm->dev, "Junction Temp Alarm2(140C) occurred\n");
+
+ thermal_zone_device_update(mtherm->tz_device);
+
+ return IRQ_HANDLED;
+}
+
+static int max77620_thermal_probe(struct platform_device *pdev)
+{
+ struct max77620_therm_info *mtherm;
+ int ret;
+
+ if (!pdev->dev.of_node)
+ pdev->dev.of_node = pdev->dev.parent->of_node;
+
+ mtherm = devm_kzalloc(&pdev->dev, sizeof(*mtherm), GFP_KERNEL);
+ if (!mtherm)
+ return -ENOMEM;
+
+ mtherm->irq_tjalarm1 = platform_get_irq(pdev, 0);
+ mtherm->irq_tjalarm2 = platform_get_irq(pdev, 1);
+ if ((mtherm->irq_tjalarm1 < 0) || (mtherm->irq_tjalarm2 < 0)) {
+ dev_err(&pdev->dev, "Alarm irq number not available\n");
+ return -EINVAL;
+ }
+
+ mtherm->dev = &pdev->dev;
+ mtherm->rmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!mtherm->rmap) {
+ dev_err(&pdev->dev, "Failed to get parent regmap\n");
+ return -ENODEV;
+ }
+
+ mtherm->tz_device = devm_thermal_zone_of_sensor_register(&pdev->dev, 0,
+ mtherm, &max77620_thermal_ops);
+ if (IS_ERR(mtherm->tz_device)) {
+ ret = PTR_ERR(mtherm->tz_device);
+ dev_err(&pdev->dev, "Failed to register thermal zone, %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm1, NULL,
+ max77620_thermal_irq,
+ IRQF_ONESHOT | IRQF_SHARED,
+ dev_name(&pdev->dev), mtherm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to request irq1, %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm2, NULL,
+ max77620_thermal_irq,
+ IRQF_ONESHOT | IRQF_SHARED,
+ dev_name(&pdev->dev), mtherm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to request irq2, %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, mtherm);
+ return 0;
+}
+
+static struct platform_device_id max77620_thermal_devtype[] = {
+ { .name = "max77620-thermal", },
+ {},
+};
+
+static struct platform_driver max77620_thermal_driver = {
+ .driver = {
+ .name = "max77620-thermal",
+ },
+ .probe = max77620_thermal_probe,
+ .id_table = max77620_thermal_devtype,
+};
+
+module_platform_driver(max77620_thermal_driver);
+
+MODULE_DESCRIPTION("Max77620 Junction temperature Thermal driver");
+MODULE_ALIAS("platform:max77620-thermal");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@...dia.com>");
+MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@...dia.com>");
+MODULE_LICENSE("GPL v2");
--
2.1.4
Powered by blists - more mailing lists