| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BLUPR12MB0691A91D12F059F7BECB69C5F7BE0@BLUPR12MB0691.namprd12.prod.outlook.com> Date: Fri, 4 Mar 2016 00:44:01 +0000 From: "Deucher, Alexander" <Alexander.Deucher@....com> To: 'Ken Moffat' <zarniwhoop@...world.com>, "StDenis, Tom" <Tom.StDenis@....com> CC: "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org> Subject: RE: [drm:radeon_dp_link_train] *ERROR* clock recovery failed -bisected > -----Original Message----- > From: Ken Moffat [mailto:zarniwhoop@...world.com] > Sent: Thursday, March 03, 2016 6:47 PM > To: Deucher, Alexander; StDenis, Tom > Cc: dri-devel@...ts.freedesktop.org; linux-kernel@...r.kernel.org > Subject: [drm:radeon_dp_link_train] *ERROR* clock recovery failed - > bisected > > On Thu, Mar 03, 2016 at 02:38:11AM +0000, Ken Moffat wrote: > > One of my machines is an A10 Kaveri desktop, with a good old VGA > > connection to the monitor. I've only just started trying to boot > > any 4.5 kernel on it, but with 4.5.0-rc6 and now linus's tree from a > > few hours ago (4.5.0-rc6-00018-gf983cd3) I get a blank screen, with > > no video signal, as soon as it tries to switch to a framebuffer. > > > > Comparing the logs, the first bad attempt had a couple of new error > > messages, everything else in the logs looked normal - > > > > Mar 1 19:31:10 deluxe kernel: [ 2.543163] fbcon: radeondrmfb (fb0) is > primary device > > Mar 1 19:31:10 deluxe kernel: [ 2.654179] [drm:radeon_dp_link_train] > *ERROR* clock recovery reached max voltage > > Mar 1 19:31:10 deluxe kernel: [ 2.654181] [drm:radeon_dp_link_train] > *ERROR* clock recovery failed > > Mar 1 19:31:10 deluxe kernel: [ 2.677142] Console: switching to colour > frame buffer device 200x56 > > Mar 1 19:31:10 deluxe kernel: [ 2.680435] radeon 0000:00:01.0: fb0: > radeondrmfb frame buffer device > > > Bisection pointed to > > 092c96a8ab9d1bd60ada2ed385cc364ce084180e is the first bad commit > commit 092c96a8ab9d1bd60ada2ed385cc364ce084180e > Author: Alex Deucher <alexander.deucher@....com> > Date: Thu Dec 17 10:23:34 2015 -0500 > > drm/radeon: fix dp link rate selection (v2) > > Need to properly handle the max link rate in the dpcd. > This prevents some cases where 5.4 Ghz is selected when > it shouldn't be. > > v2: simplify logic, add array bounds check > > Reviewed-by: Tom St Denis <tom.stdenis@....com> > Signed-off-by: Alex Deucher <alexander.deucher@....com> > > I have now reverted that commit from that version of linus's tree and > the machine everything is back to normal. > The attached radeon patch should fix it. I accidently dropped the special handling for NUTMEG DP to VGA bridge chips. > This mobo does not have a DP connector. > The VGA port uses a DP to VGA bridge chip. Alex > lspci reports the graphics part is > > 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. > [AMD/ATI] Kaveri [Radeon R7 Graphics] (prog-if 00 [VGA controller]) > Subsystem: Gigabyte Technology Co., Ltd Kaveri [Radeon R7 Graphics] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PER > R- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 26 > Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] > Region 2: Memory at d0000000 (64-bit, prefetchable) [size=8M] > Region 4: I/O ports at f000 [size=256] > Region 5: Memory at feb00000 (32-bit, non-prefetchable) [size=256K] > Expansion ROM at feb40000 [disabled] [size=128K] > Capabilities: [48] Vendor Specific Information: Len=08 <?> > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0- > ,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0 > ExtTag+ RBE+ > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, > OBFF Not Supported > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF > Disabled > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0f00c Data: 4172 > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Capabilities: [270 v1] #19 > Capabilities: [2b0 v1] Address Translation Service (ATS) > ATSCap: Invalidate Queue Depth: 00 > ATSCtl: Enable-, Smallest Translation Unit: 00 > Capabilities: [2c0 v1] Page Request Interface (PRI) > PRICtl: Enable- Reset- > PRISta: RF- UPRGI- Stopped+ > Page Request Capacity: 00000020, Page Request Allocation: 00000000 > Capabilities: [2d0 v1] Process Address Space ID (PASID) > PASIDCap: Exec- Priv-, Max PASID Width: 10 > PASIDCtl: Enable- Exec- Priv- > Kernel driver in use: radeon > > I've attached my config. Please let me know if there is anything I > can do to help fix this. > > ĸen > -- > This email was written using 100% recycled letters. Download attachment "0001-drm-radeon-dp-add-back-special-handling-for-NUTMEG.patch" of type "application/octet-stream" (2011 bytes) Download attachment "0002-drm-amdgpu-dp-add-back-special-handling-for-NUTMEG.patch" of type "application/octet-stream" (2046 bytes)
Powered by blists - more mailing lists