linux-kernel - Re: [PATCH 2/2] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160304184136.GB5033@leverpostej>
Date:	Fri, 4 Mar 2016 18:41:36 +0000
From:	Mark Rutland <mark.rutland@....com>
To:	Eric Anholt <eric@...olt.net>
Cc:	linux-rpi-kernel@...ts.infradead.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Stephen Warren <swarren@...dotorg.org>,
	Lee Jones <lee@...nel.org>,
	Florian Fainelli <f.fainelli@...il.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH 2/2] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.

On Fri, Mar 04, 2016 at 10:39:29AM -0800, Eric Anholt wrote:
> For now this doesn't support the new hardware present on the Pi 3 (BT,
> wifi, GPIO expander).  Since the GPIO expander isn't supported, we
> also don't have the LEDs like the other board files do.
> 
> Signed-off-by: Eric Anholt <eric@...olt.net>
> ---
>  arch/arm/boot/dts/Makefile            |  3 +-
>  arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 22 ++++++++++++
>  arch/arm/boot/dts/bcm2837.dtsi        | 68 +++++++++++++++++++++++++++++++++++
>  3 files changed, 92 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts
>  create mode 100644 arch/arm/boot/dts/bcm2837.dtsi

> +	timer {
> +		compatible = "arm,armv7-timer";
> +		interrupt-parent = <&local_intc>;
> +		interrupts = <0>, // PHYS_SECURE_PPI
> +			     <1>, // PHYS_NONSECURE_PPI
> +			     <3>, // VIRT_PPI
> +			     <2>; // HYP_PPI
> +		always-on;
> +	};

Are the CPUs in an always-on power domain? Or is it jsut that the kernel
doesn't perform power management of CPUs?

The always-on proeprty is only intended for the former.

Mark.