linux-kernel - [PATCH v3 11/13] ARM: dts: sun8i: enable mmc for H8Homlet Board.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sat,  5 Mar 2016 23:43:04 +0800
From:	Vishnu Patekar <vishnupatekar0510@...il.com>
To:	robh+dt@...nel.org, corbet@....net, pawel.moll@....com,
	mark.rutland@....com, ijc+devicetree@...lion.org.uk,
	galak@...eaurora.org, maxime.ripard@...e-electrons.com,
	linux@....linux.org.uk, emilio@...pez.com.ar
Cc:	jenskuske@...il.com, hdegoede@...hat.com, wens@...e.org,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
	linux-gpio@...r.kernel.org, linus.walleij@...aro.org,
	mturquette@...libre.com, sboyd@...eaurora.org,
	patchesrdh@...as.com, linux-clk@...r.kernel.org
Subject: [PATCH v3 11/13] ARM: dts: sun8i: enable mmc for H8Homlet Board.

This enables mmc0.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@...il.com>
Tested-by: LABBE Corentin <clabbe.montjoie@...il.com>
---
 arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index 342e1d3..3269f39 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -43,6 +43,7 @@
 
 /dts-v1/;
 #include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
@@ -57,6 +58,16 @@
 	};
 };
 
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v0>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	bus-width = <4>;
+	cd-inverted;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;
-- 
1.9.1