[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1457263284-8819-1-git-send-email-afaerber@suse.de>
Date: Sun, 6 Mar 2016 12:21:24 +0100
From: Andreas Färber <afaerber@...e.de>
To: linux-meson@...glegroups.com
Cc: Arnd Bergmann <arnd@...db.de>,
Andreas Färber <afaerber@...e.de>,
Nicolas Saenz Julienne <nicolassaenzj@...il.com>,
Jonathan Corbet <corbet@....net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>, Carlo Caione <carlo@...one.org>,
linux-doc@...r.kernel.org (open list:DOCUMENTATION),
linux-kernel@...r.kernel.org (open list),
linux-serial@...r.kernel.org (open list:SERIAL DRIVERS),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Amlogic Meson
SoC support)
Subject: [PATCH v4] tty: serial: meson: Implement earlycon support
Split off the bulk of the existing meson_serial_console_write()
implementation into meson_serial_port_write() for implementing
meson_serial_early_console_write().
Use "meson" as the earlycon driver name, courtesy of Nicolas.
Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@...il.com>
Acked-by: Carlo Caione <carlo@...lessm.com>
Signed-off-by: Andreas Färber <afaerber@...e.de>
---
v3 -> v4:
* Select SERIAL_EARLYCON (Arnd)
v2 -> v3:
* Rename from "meson_serial" to just "meson" (Nicolas)
v1 -> v2:
* Implement meson_serial_early_console_write() instead of reusing
meson_serial_console_write() (Peter)
Documentation/kernel-parameters.txt | 6 ++++++
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/meson_uart.c | 42 ++++++++++++++++++++++++++++++-------
3 files changed, 42 insertions(+), 7 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e0a21e4556a6..a7c1377fd80f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1039,6 +1039,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
the driver will use only 32-bit accessors to read/write
the device registers.
+ meson,<addr>
+ Start an early, polled-mode console on a meson serial
+ port at the specified address. The serial port must
+ already be setup and configured. Options are not yet
+ supported.
+
msm_serial,<addr>
Start an early, polled-mode console on an msm serial
port at the specified address. The serial port
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index bdbe1c533c6a..ad7538e8a4e8 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -213,6 +213,7 @@ config SERIAL_MESON_CONSOLE
bool "Support for console on meson"
depends on SERIAL_MESON=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
Say Y here if you wish to use a Amlogic MesonX UART as the
system console (the system console is the device which
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 024445aa0521..6aea0f4a9165 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -481,18 +481,13 @@ static void meson_console_putchar(struct uart_port *port, int ch)
writel(ch, port->membase + AML_UART_WFIFO);
}
-static void meson_serial_console_write(struct console *co, const char *s,
- u_int count)
+static void meson_serial_port_write(struct uart_port *port, const char *s,
+ u_int count)
{
- struct uart_port *port;
unsigned long flags;
int locked;
u32 val, tmp;
- port = meson_ports[co->index];
- if (!port)
- return;
-
local_irq_save(flags);
if (port->sysrq) {
locked = 0;
@@ -516,6 +511,18 @@ static void meson_serial_console_write(struct console *co, const char *s,
local_irq_restore(flags);
}
+static void meson_serial_console_write(struct console *co, const char *s,
+ u_int count)
+{
+ struct uart_port *port;
+
+ port = meson_ports[co->index];
+ if (!port)
+ return;
+
+ meson_serial_port_write(port, s, count);
+}
+
static int meson_serial_console_setup(struct console *co, char *options)
{
struct uart_port *port;
@@ -554,6 +561,27 @@ static int __init meson_serial_console_init(void)
}
console_initcall(meson_serial_console_init);
+static void meson_serial_early_console_write(struct console *co,
+ const char *s,
+ u_int count)
+{
+ struct earlycon_device *dev = co->data;
+
+ meson_serial_port_write(&dev->port, s, count);
+}
+
+static int __init
+meson_serial_early_console_setup(struct earlycon_device *device, const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = meson_serial_early_console_write;
+ return 0;
+}
+OF_EARLYCON_DECLARE(meson, "amlogic,meson-uart",
+ meson_serial_early_console_setup);
+
#define MESON_SERIAL_CONSOLE (&meson_serial_console)
#else
#define MESON_SERIAL_CONSOLE NULL
--
2.6.2
Powered by blists - more mailing lists