| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1457344062-11633-34-git-send-email-boris.brezillon@free-electrons.com>
Date: Mon, 7 Mar 2016 10:47:23 +0100
From: Boris Brezillon <boris.brezillon@...e-electrons.com>
To: David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org
Cc: Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Ralf Baechle <ralf@...ux-mips.org>, linux-mips@...ux-mips.org,
Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Wenyou Yang <wenyou.yang@...el.com>,
Josh Wu <rainyfeeling@...look.com>,
Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>, linux-sunxi@...glegroups.com,
Stefan Agner <stefan@...er.ch>,
Kyungmin Park <kyungmin.park@...sung.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
punnaiah choudary kalluri <punnaia@...inx.com>,
Priit Laes <plaes@...es.org>,
Kamal Dasu <kdasu.kdev@...il.com>,
bcm-kernel-feedback-list@...adcom.com, linux-api@...r.kernel.org,
Harvey Hunt <harvey.hunt@...tec.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>
Subject: [PATCH v4 33/52] mtd: nand: fsl_elbc: switch to mtd_ooblayout_ops
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
---
drivers/mtd/nand/fsl_elbc_nand.c | 83 +++++++++++++++++++++++-----------------
1 file changed, 47 insertions(+), 36 deletions(-)
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 059d5f7..487eae0 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -79,32 +79,53 @@ struct fsl_elbc_fcm_ctrl {
/* These map to the positions used by the FCM hardware ECC generator */
-/* Small Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
- .eccbytes = 3,
- .eccpos = {6, 7, 8},
- .oobfree = { {0, 5}, {9, 7} },
-};
+static int fsl_elbc_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
-/* Small Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
- .eccbytes = 3,
- .eccpos = {8, 9, 10},
- .oobfree = { {0, 5}, {6, 2}, {11, 5} },
-};
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
-/* Large Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
- .eccbytes = 12,
- .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
- .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-};
+ oobregion->offset = (16 * section) + 6;
+ if (priv->fmr & FMR_ECCM)
+ oobregion->offset += 2;
-/* Large Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
- .eccbytes = 12,
- .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
- .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
+ oobregion->length = chip->ecc.bytes;
+
+ return 0;
+}
+
+static int fsl_elbc_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
+
+ if (section > chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ if (mtd->writesize > 512)
+ oobregion->offset++;
+ oobregion->length = (priv->fmr & FMR_ECCM) ? 7 : 5;
+ } else {
+ oobregion->offset = (16 * section) -
+ ((priv->fmr & FMR_ECCM) ? 5 : 7);
+ if (section < chip->ecc.steps)
+ oobregion->length = 13;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsl_elbc_ooblayout_ops = {
+ .ecc = fsl_elbc_ooblayout_ecc,
+ .free = fsl_elbc_ooblayout_free,
};
/*
@@ -657,8 +678,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
chip->ecc.bytes);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
chip->ecc.total);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
- chip->ecc.layout);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n",
+ mtd->ooblayout);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
@@ -675,14 +696,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
} else if (mtd->writesize == 2048) {
priv->page_size = 1;
setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
- /* adjust ecc setup if needed */
- if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
- BR_DECC_CHK_GEN) {
- chip->ecc.size = 512;
- chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
- &fsl_elbc_oob_lp_eccm1 :
- &fsl_elbc_oob_lp_eccm0;
- }
} else {
dev_err(priv->dev,
"fsl_elbc_init: page size %d is not supported\n",
@@ -780,9 +793,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
chip->ecc.mode = NAND_ECC_HW;
- /* put in small page settings and adjust later if needed */
- chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
- &fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0;
+ mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
--
2.1.4
Powered by blists - more mailing lists