| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <56DD84AF.8040900@intel.com>
Date: Mon, 7 Mar 2016 15:39:59 +0200
From: Adrian Hunter <adrian.hunter@...el.com>
To: Shawn Lin <shawn.lin@...k-chips.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>,
Michal Simek <michal.simek@...inx.com>,
soren.brinkmann@...inx.com, Rob Herring <robh+dt@...nel.org>,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v6 2/2] mmc: sdhci-of-arasan: add phy support for
sdhci-of-arasan
On 07/03/16 14:48, Shawn Lin wrote:
> 在 2016/3/7 20:07, Adrian Hunter 写道:
>> On 05/03/16 04:24, Shawn Lin wrote:
>>> This patch adds Generic PHY access for sdhci-of-arasan. Driver
>>> can get PHY handler from dt-binding, and power-on/init the PHY.
>>> Currently, it's just mandatory for arasan,sdhci-5.1.
>>>
>>> Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>
>>>
>>> Serise-changes: 6
>>> - rebase on Ulf's next
>>> - fix some preexisting problems of err handling suggested
>>> by Adrian
>>>
>>> Serise-changes: 5
>>> - remove rpm support from this serise
>>> - fix some err case for handling phy
>>>
>>> Serise-changes: 4
>>> - remove suspend/resume_phy
>>> - add err handle label for system PM callback
>>> - fix comments of struct sdhci_arasan_data and system PM
>>> callback suggested by Michal
>>>
>>> Serise-changes: 3
>>> - remove phy_init/exit for suspend/resume
>>> - adjust phy_int/power_on seq to make code more reasonable
>>> simplify suspend/resume_phy
>>>
>>> Serise-changes: 2
>>> - Keep phy as a mandatory requirement for arasan,sdhci-5.1
>>>
>>
>>
>> It looks good, but, sorry to be a pain, the fixes to the error handling
>> really have to be separate patches. I would make a separate patch for
>> removing clk_disable(sdhci_arasan->clk_ahb) from sdhci_arasan_resume() and
>> another for the error handling fixes in sdhci_arasan_probe().
>
> Thanks. Does that mean you will split these two changes out of this
> single patch by youself? ：）
You need to do it. I am just Ack/Nack'ing at the moment.
>
>>
>> By the way, those "Serise-changes" should not be in the commit msg.
>
> My fault, sorry for forgeting to check the format after generating it by
> patman.py
>
>>
>>> ---
>>>
>>> Changes in v6: None
>>> Changes in v2: None
>>>
>>> drivers/mmc/host/sdhci-of-arasan.c | 71
>>> +++++++++++++++++++++++++++++++++-----
>>> 1 file changed, 63 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/sdhci-of-arasan.c
>>> b/drivers/mmc/host/sdhci-of-arasan.c
>>> index 1e4b5e0..2e482b1 100644
>>> --- a/drivers/mmc/host/sdhci-of-arasan.c
>>> +++ b/drivers/mmc/host/sdhci-of-arasan.c
>>> @@ -21,6 +21,7 @@
>>>
>>> #include <linux/module.h>
>>> #include <linux/of_device.h>
>>> +#include <linux/phy/phy.h>
>>> #include "sdhci-pltfm.h"
>>>
>>> #define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
>>> @@ -32,9 +33,11 @@
>>> /**
>>> * struct sdhci_arasan_data
>>> * @clk_ahb: Pointer to the AHB clock
>>> + * @phy: Pointer to the generic phy
>>> */
>>> struct sdhci_arasan_data {
>>> struct clk *clk_ahb;
>>> + struct phy *phy;
>>> };
>>>
>>> static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host
>>> *host)
>>> @@ -88,6 +91,15 @@ static int sdhci_arasan_suspend(struct device *dev)
>>> if (ret)
>>> return ret;
>>>
>>> + if (!IS_ERR(sdhci_arasan->phy)) {
>>> + ret = phy_power_off(sdhci_arasan->phy);
>>> + if (ret) {
>>> + dev_err(dev, "Cannot power off phy.\n");
>>> + sdhci_resume_host(host);
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> clk_disable(pltfm_host->clk);
>>> clk_disable(sdhci_arasan->clk_ahb);
>>>
>>> @@ -118,10 +130,17 @@ static int sdhci_arasan_resume(struct device *dev)
>>> ret = clk_enable(pltfm_host->clk);
>>> if (ret) {
>>> dev_err(dev, "Cannot enable SD clock.\n");
>>> - clk_disable(sdhci_arasan->clk_ahb);
>>> return ret;
>>> }
>>>
>>> + if (!IS_ERR(sdhci_arasan->phy)) {
>>> + ret = phy_power_on(sdhci_arasan->phy);
>>> + if (ret) {
>>> + dev_err(dev, "Cannot power on phy.\n");
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> return sdhci_resume_host(host);
>>> }
>>> #endif /* ! CONFIG_PM_SLEEP */
>>> @@ -148,19 +167,21 @@ static int sdhci_arasan_probe(struct
>>> platform_device *pdev)
>>> sdhci_arasan->clk_ahb = devm_clk_get(&pdev->dev, "clk_ahb");
>>> if (IS_ERR(sdhci_arasan->clk_ahb)) {
>>> dev_err(&pdev->dev, "clk_ahb clock not found.\n");
>>> - return PTR_ERR(sdhci_arasan->clk_ahb);
>>> + ret = PTR_ERR(sdhci_arasan->clk_ahb);
>>> + goto err_pltfm_free;
>>> }
>>>
>>> clk_xin = devm_clk_get(&pdev->dev, "clk_xin");
>>> if (IS_ERR(clk_xin)) {
>>> dev_err(&pdev->dev, "clk_xin clock not found.\n");
>>> - return PTR_ERR(clk_xin);
>>> + ret = PTR_ERR(clk_xin);
>>> + goto err_pltfm_free;
>>> }
>>>
>>> ret = clk_prepare_enable(sdhci_arasan->clk_ahb);
>>> if (ret) {
>>> dev_err(&pdev->dev, "Unable to enable AHB clock.\n");
>>> - return ret;
>>> + goto err_pltfm_free;
>>> }
>>>
>>> ret = clk_prepare_enable(clk_xin);
>>> @@ -178,19 +199,48 @@ static int sdhci_arasan_probe(struct
>>> platform_device *pdev)
>>> goto clk_disable_all;
>>> }
>>>
>>> + sdhci_arasan->phy = ERR_PTR(-ENODEV);
>>> + if (of_device_is_compatible(pdev->dev.of_node,
>>> + "arasan,sdhci-5.1")) {
>>> + sdhci_arasan->phy = devm_phy_get(&pdev->dev,
>>> + "phy_arasan");
>>> + if (IS_ERR(sdhci_arasan->phy)) {
>>> + ret = PTR_ERR(sdhci_arasan->phy);
>>> + dev_err(&pdev->dev, "No phy for arasan,sdhci-5.1.\n");
>>> + goto clk_disable_all;
>>> + }
>>> +
>>> + ret = phy_init(sdhci_arasan->phy);
>>> + if (ret < 0) {
>>> + dev_err(&pdev->dev, "phy_init err.\n");
>>> + goto clk_disable_all;
>>> + }
>>> +
>>> + ret = phy_power_on(sdhci_arasan->phy);
>>> + if (ret < 0) {
>>> + dev_err(&pdev->dev, "phy_power_on err.\n");
>>> + goto err_phy_power;
>>> + }
>>> + }
>>> +
>>> ret = sdhci_add_host(host);
>>> if (ret)
>>> - goto err_pltfm_free;
>>> + goto err_add_host;
>>>
>>> return 0;
>>>
>>> -err_pltfm_free:
>>> - sdhci_pltfm_free(pdev);
>>> +err_add_host:
>>> + if (!IS_ERR(sdhci_arasan->phy))
>>> + phy_power_off(sdhci_arasan->phy);
>>> +err_phy_power:
>>> + if (!IS_ERR(sdhci_arasan->phy))
>>> + phy_exit(sdhci_arasan->phy);
>>> clk_disable_all:
>>> clk_disable_unprepare(clk_xin);
>>> clk_dis_ahb:
>>> clk_disable_unprepare(sdhci_arasan->clk_ahb);
>>> -
>>> +err_pltfm_free:
>>> + sdhci_pltfm_free(pdev);
>>> return ret;
>>> }
>>>
>>> @@ -202,6 +252,11 @@ static int sdhci_arasan_remove(struct
>>> platform_device *pdev)
>>> struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
>>> struct clk *clk_ahb = sdhci_arasan->clk_ahb;
>>>
>>> + if (!IS_ERR(sdhci_arasan->phy)) {
>>> + phy_power_off(sdhci_arasan->phy);
>>> + phy_exit(sdhci_arasan->phy);
>>> + }
>>> +
>>> ret = sdhci_pltfm_unregister(pdev);
>>>
>>> clk_disable_unprepare(clk_ahb);
>>>
>>
>>
>>
>>
>
>
Powered by blists - more mailing lists