[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1457367513-26069-1-git-send-email-boris.brezillon@free-electrons.com>
Date: Mon, 7 Mar 2016 17:18:17 +0100
From: Boris Brezillon <boris.brezillon@...e-electrons.com>
To: David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>, linux-sunxi@...glegroups.com,
Boris Brezillon <boris.brezillon@...e-electrons.com>
Subject: [PATCH 00/16] mtd: nand: sunxi: various improvements/fixes
Hi,
This patchset aims at fixing a few minor bugs, and improving performances
of NAND accesses going through the sunxi NAND controller.
Note that patch 5 exports functions provided by the core which are needed
in patch 6 to still support raw OOB accesses. Other patches are just
fixes or improvements only touching the sunxi driver itself.
Here are the main improvements:
- queue CLE/ALE requests instead of forcing the controller to issue each
cmd and address cycle separately
- benefit from ECC correction on protected OOB bytes
- use polling instead of interrupt-based waiting (avoid scheduling
overhead for short wait period)
I'm preparing another series based on this one to add page operations
and DMA support, which, according to my first tests will bring a huge
speed improvement (at least x2 on read accesses, and even more when
ONFI timing mode > 0 is used).
Stay tuned.
Best Regards,
Boris
Boris Brezillon (16):
mtd: nand: sunxi: fix call order in sunxi_nand_chip_init()
mtd: nand: sunxi: fix clk rate calculation
mtd: nand: sunxi: fix EDO mode selection
mtd: nand: sunxi: adapt clk_rate to tWB, tADL, tWHR and tRHW timings
mtd: nand: export default read/write oob functions
mtd: nand: sunxi: implement ->read_oob()/->write_oob()
mtd: nand: sunxi: implement ->read_subpage()
mtd: nand: sunxi: improve ->cmd_ctrl() function
mtd: nand: sunxi: let the NAND controller control the CE line
mtd: nand: sunxi: fix the NFC_ECC_ERR_CNT() macro
mtd: nand: sunxi: fix NFC_CTL setting
mtd: nand: sunxi: disable clks on device removal
mtd: nand: enable ECC pipelining
mtd: nand: sunxi: fix ->dev_ready() implementation
mtd: nand: sunxi: make use of readl_poll_timeout()
mtd: nand: sunxi: poll for events instead of using interrupts
drivers/mtd/nand/nand_base.c | 18 +--
drivers/mtd/nand/sunxi_nand.c | 293 ++++++++++++++++++++++++++++++------------
include/linux/mtd/nand.h | 14 ++
3 files changed, 233 insertions(+), 92 deletions(-)
--
2.1.4
Powered by blists - more mailing lists