Linux version 4.4.4 (root@uruz) (gcc version 5.3.1 20160224 (Debian 5.3.1-10) ) #2 SMP Sun Mar 6 13:12:55 CET 2016 Command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda1 ro pcie_aspm=force radeon.audio=1 radeon.dpm=1 tseg: 00cff00000 x86/fpu: Legacy x87 FPU detected. x86/fpu: Using 'lazy' FPU context switches. e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000ce447fff] usable BIOS-e820: [mem 0x00000000ce448000-0x00000000ce647fff] ACPI NVS BIOS-e820: [mem 0x00000000ce648000-0x00000000cfd3efff] usable BIOS-e820: [mem 0x00000000cfd3f000-0x00000000cfdbefff] reserved BIOS-e820: [mem 0x00000000cfdbf000-0x00000000cfebefff] ACPI NVS BIOS-e820: [mem 0x00000000cfebf000-0x00000000cfef5fff] ACPI data BIOS-e820: [mem 0x00000000cfef6000-0x00000000cfefffff] usable BIOS-e820: [mem 0x00000000f7000000-0x00000000f7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable NX (Execute Disable) protection: active SMBIOS 2.6 present. DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/1443, BIOS F.23 11/11/2010 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable AGP: No AGP bridge found e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 base 0000FFE00000 mask FFFFFFE00000 write-protect 4 base 000100000000 mask FFFF00000000 write-back 5 base 000200000000 mask FFFFE0000000 write-back 6 disabled 7 disabled TOM2: 0000000230000000 aka 8960M x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000 Base memory trampoline at [ffff880000099000] 99000 size 24576 Using GB pages for direct mapping BRK [0x018f3000, 0x018f3fff] PGTABLE BRK [0x018f4000, 0x018f4fff] PGTABLE BRK [0x018f5000, 0x018f5fff] PGTABLE BRK [0x018f6000, 0x018f6fff] PGTABLE BRK [0x018f7000, 0x018f7fff] PGTABLE BRK [0x018f8000, 0x018f8fff] PGTABLE ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000FE020 000024 (v02 HP ) ACPI: XSDT 0x00000000CFEF5120 00005C (v01 HPQOEM SLIC-MPC 00000003 01000013) ACPI: FACP 0x00000000CFEF4000 0000F4 (v04 HP 1443 00000003 MSFT 01000013) ACPI: DSDT 0x00000000CFEE2000 00E0D7 (v01 HP 1443 F0000000 MSFT 01000013) ACPI: FACS 0x00000000CFE9C000 000040 ACPI: FACS 0x00000000CFE9C000 000040 ACPI: HPET 0x00000000CFEF3000 000038 (v01 HP 1443 00000001 MSFT 01000013) ACPI: APIC 0x00000000CFEF2000 000084 (v02 HP 1443 00000001 MSFT 01000013) ACPI: MCFG 0x00000000CFEF1000 00003C (v01 HP 1443 00000001 MSFT 01000013) ACPI: BOOT 0x00000000CFEE1000 000028 (v01 HP 1443 00000001 MSFT 01000013) ACPI: SLIC 0x00000000CFEE0000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 0x00000000CFEDF000 00052A (v01 AMD POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000021fffffff] NODE_DATA(0) allocated [mem 0x21fff9000-0x21fffcfff] Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000021fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000ce447fff] node 0: [mem 0x00000000ce648000-0x00000000cfd3efff] node 0: [mem 0x00000000cfef6000-0x00000000cfefffff] node 0: [mem 0x0000000100000000-0x000000021fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff] On node 0 totalpages: 2030311 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 13230 pages used for memmap DMA32 zone: 846665 pages, LIFO batch:31 Normal zone: 18432 pages used for memmap Normal zone: 1179648 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x1002a201 base: 0xfed00000 smpboot: Allowing 4 CPUs, 2 hotplug CPUs e820: [mem 0xcff00000-0xf6ffffff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff88021fc00000 s84632 r8192 d30056 u524288 pcpu-alloc: s84632 r8192 d30056 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1998564 Policy zone: Normal Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda1 ro pcie_aspm=force radeon.audio=1 radeon.dpm=1 PCIe ASPM is forcibly enabled PID hash table entries: 4096 (order: 3, 32768 bytes) AGP: Checking aperture... AGP: No AGP bridge found AGP: Node 0: aperture [bus addr 0x17c000000-0x17dffffff] (32MB) Aperture beyond 4GB. Ignoring. AGP: Your BIOS doesn't leave an aperture memory hole AGP: Please enable the IOMMU option in the BIOS setup AGP: This costs you 64MB of RAM AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB) Memory: 7852748K/8121244K available (5136K kernel code, 471K rwdata, 2268K rodata, 756K init, 496K bss, 268496K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. NR_IRQS:4352 nr_irqs:456 16 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 2793.206 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 5588.17 BogoMIPS (lpj=9310686) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20150930 ACPI: 2 ACPI AML tables successfully acquired and loaded Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks LVT offset 0 assigned for vector 0xf9 process: using AMD E400 aware idle routine Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 Freeing SMP alternatives memory: 20K (ffffffff81871000 - ffffffff81876000) ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: AMD Phenom(tm) II N620 Dual-Core Processor (family: 0x10, model: 0x6, stepping: 0x3) Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f x86: Booting SMP configuration: .... node #0, CPUs: #1 x86: Booted up 1 node, 2 CPUs process: System has AMD C1E enabled process: Switch to broadcast mode on CPU1 smpboot: Total of 2 processors activated (11177.35 BogoMIPS) process: Switch to broadcast mode on CPU0 devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xce448000-0xce647fff] (2097152 bytes) PM: Registering ACPI NVS region [mem 0xcfdbf000-0xcfebefff] (1048576 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu node 0 link 0: io port [0, ffffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [mem 0xf7000000-0xf7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] node 0 link 0: mmio [e0000000, f02fffff] node 0 link 0: mmio [f0300000, f04fffff] node 0 link 0: mmio [f0500000, f6ffffff] node 0 link 0: mmio [f7000000, f7ffffff] ==> none node 0 link 0: mmio [f8000000, ffdfffff] TOM2: 0000000230000000 aka 8960M bus: [bus 00-1f] on node 0 link 0 bus: 00 [io 0x0000-0xffff] bus: 00 [mem 0x000a0000-0x000bffff] bus: 00 [mem 0xd0000000-0xf6ffffff] bus: 00 [mem 0xf8000000-0xffffffff] bus: 00 [mem 0x230000000-0xfcffffffff] Simple Boot Flag at 0x44 set to 0x1 ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000) PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820 PCI: Using configuration type 1 for base access ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Executed 1 blocks of module-level executable AML code [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI : EC: EC started ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cedff]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf6ffffff window] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfed3ffff window] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 pci 0000:00:01.0: [1022:9602] type 01 class 0x060400 pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: System wakeup disabled by ACPI pci 0000:00:05.0: [1022:9605] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: System wakeup disabled by ACPI pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: System wakeup disabled by ACPI pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 pci 0000:00:11.0: reg 0x10: [io 0x5038-0x503f] pci 0000:00:11.0: reg 0x14: [io 0x504c-0x504f] pci 0000:00:11.0: reg 0x18: [io 0x5030-0x5037] pci 0000:00:11.0: reg 0x1c: [io 0x5048-0x504b] pci 0000:00:11.0: reg 0x20: [io 0x5010-0x501f] pci 0000:00:11.0: reg 0x24: [mem 0xf0508000-0xf05083ff] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 pci 0000:00:12.0: reg 0x10: [mem 0xf0507000-0xf0507fff] pci 0000:00:12.0: System wakeup disabled by ACPI pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 pci 0000:00:12.2: reg 0x10: [mem 0xf0508600-0xf05086ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: System wakeup disabled by ACPI pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 pci 0000:00:13.0: reg 0x10: [mem 0xf0506000-0xf0506fff] pci 0000:00:13.0: System wakeup disabled by ACPI pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 pci 0000:00:13.2: reg 0x10: [mem 0xf0508500-0xf05085ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: System wakeup disabled by ACPI pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 0x10: [mem 0xf0500000-0xf0503fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:14.4: System wakeup disabled by ACPI pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 pci 0000:00:14.5: reg 0x10: [mem 0xf0505000-0xf0505fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 pci 0000:00:16.0: reg 0x10: [mem 0xf0504000-0xf0504fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 pci 0000:00:16.2: reg 0x10: [mem 0xf0508400-0xf05084ff] pci 0000:00:16.2: supports D1 D2 pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:16.2: System wakeup disabled by ACPI pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 pci 0000:01:05.0: [1002:9712] type 00 class 0x030000 pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref] pci 0000:01:05.0: reg 0x14: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 0x18: [mem 0xf0400000-0xf040ffff] pci 0000:01:05.0: reg 0x24: [mem 0xf0300000-0xf03fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xf0300000-0xf04fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000 pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:02:00.0: reg 0x18: [mem 0xf0200000-0xf021ffff 64bit] pci 0000:02:00.0: reg 0x20: [io 0x3000-0x30ff] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300 pci 0000:02:00.1: reg 0x10: [mem 0xf0220000-0xf0223fff 64bit] pci 0000:02:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 02] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000 pci 0000:03:00.0: reg 0x10: [mem 0xf0100000-0xf010ffff 64bit] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:04:00.0: reg 0x10: [io 0x2000-0x20ff] pci 0000:04:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] pci 0000:04:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] pci 0000:04:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf6ffffff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfed3ffff window] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 ACPI: Enabled 1 GPEs in block 00 to 1F ACPI : EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62 vgaarb: setting as boot device: PCI:0000:01:05.0 vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:02:00.0 vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xce448000-0xcfffffff] e820: reserve RAM buffer [mem 0xcfd3f000-0xcfffffff] e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff] clocksource: Switched to clocksource hpet pnp: PnP ACPI init system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved system 00:00: [mem 0xf7000000-0xf7ffffff] has been reserved system 00:00: [mem 0xfec10000-0xfec1001f] has been reserved system 00:00: [mem 0xfed80000-0xfed80fff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:03: Plug and Play ACPI device, IDs SYN1e1e SYN1e00 SYN0002 PNP0f13 (active) system 00:04: [io 0x0400-0x04cf] could not be reserved system 00:04: [io 0x04d0-0x04d1] has been reserved system 00:04: [io 0x04d6] has been reserved system 00:04: [io 0x0550] has been reserved system 00:04: [io 0x0680-0x06ff] has been reserved system 00:04: [io 0x077a] has been reserved system 00:04: [io 0x0c00-0x0c01] has been reserved system 00:04: [io 0x0c14] has been reserved system 00:04: [io 0x0c50-0x0c52] has been reserved system 00:04: [io 0x0c6c] has been reserved system 00:04: [io 0x0c6f] has been reserved system 00:04: [io 0x0cd0-0x0cdb] has been reserved system 00:04: [io 0x0380-0x0387] has been reserved system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved system 00:05: [mem 0xffe00000-0xffffffff] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 6 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:04:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window pci 0000:00:06.0: bridge window [mem 0x00100000-0x001fffff] to [bus 04] add_size 400000 add_align 100000 pci 0000:00:06.0: res[8]=[mem 0x00100000-0x001fffff] res_to_dev_res add_size 400000 min_align 100000 pci 0000:00:06.0: res[8]=[mem 0x00100000-0x005fffff] res_to_dev_res add_size 400000 min_align 100000 pci 0000:00:06.0: BAR 8: assigned [mem 0xf0600000-0xf0afffff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xf0300000-0xf04fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref] pci 0000:00:02.0: PCI bridge to [bus 02] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0600000-0xf060ffff pref] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff] pci 0000:00:06.0: bridge window [mem 0xf0600000-0xf0afffff] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 05] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf6ffffff window] pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff window] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf04fffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] pci_bus 0000:04: resource 1 [mem 0xf0600000-0xf0afffff] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff window] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff window] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window] pci_bus 0000:05: resource 18 [mem 0xd0000000-0xf6ffffff window] pci_bus 0000:05: resource 19 [mem 0xf8000000-0xfed3ffff window] pci_bus 0000:05: resource 20 [mem 0xfed45000-0xffffffff window] NET: Registered protocol family 2 TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 65536 bind 65536) UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled pci 0000:01:05.0: Video device with shadowed ROM PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ c4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture LVT offset 1 assigned for vector 0x400 IBS: LVT offset 1 assigned perf: AMD IBS detected (0x0000001f) futex hash table entries: 1024 (order: 4, 65536 bytes) Initialise system trusted keyring Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: AC Adapter [ACAD] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: processor limited to max C-state 1 [Firmware Bug]: Invalid critical threshold (0) thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (55 C) [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. vga_switcheroo: detected switching method \_SB_.PCI0.AGP_.VGA_.ATPX handle [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1443). [drm] register mmio base: 0xF0400000 [drm] register mmio size: 65536 ATOM BIOS: HP_JoYaHeWi radeon 0000:01:05.0: VRAM: 320M 0x00000000C0000000 - 0x00000000D3FFFFFF (320M used) radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [drm] Detected VRAM RAM=320M, BAR=256M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 3959360 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 320M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Loading RS780 Microcode == power state 0 == ui class: none internal class: boot caps: uvd vclk: 0 dclk: 0 power level 0 sclk: 50000 vddc_index: 2 power level 1 sclk: 50000 vddc_index: 2 status: c r b == power state 1 == ui class: performance internal class: none caps: uvd vclk: 0 dclk: 0 power level 0 sclk: 20000 vddc_index: 2 power level 1 sclk: 50000 vddc_index: 2 status: == power state 2 == ui class: battery internal class: none caps: single_disp uvd vclk: 0 dclk: 0 power level 0 sclk: 20000 vddc_index: 1 power level 1 sclk: 20000 vddc_index: 1 status: == power state 3 == ui class: none internal class: uvd caps: video uvd vclk: 55000 dclk: 40000 power level 0 sclk: 50000 vddc_index: 2 power level 1 sclk: 50000 vddc_index: 2 status: == power state 4 == ui class: battery internal class: uvd_hd caps: single_disp video uvd vclk: 40000 dclk: 30000 power level 0 sclk: 38000 vddc_index: 1 power level 1 sclk: 38000 vddc_index: 1 status: == power state 5 == ui class: battery internal class: uvd_sd caps: single_disp video uvd vclk: 40000 dclk: 30000 power level 0 sclk: 38000 vddc_index: 1 power level 1 sclk: 38000 vddc_index: 1 status: ACPI: Battery Slot [BAT0] (battery present) [drm] radeon: dpm initialized [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCIE GART of 512M enabled (table at 0x00000000C0258000). radeon 0000:01:05.0: WB enabled radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8802161a2c00 radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0xffffc90001016038 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. radeon 0000:01:05.0: radeon: MSI limited to 32-bit [drm] radeon: irq initialized. [drm] ring test on 0 succeeded in 1 usecs [drm] ring test on 5 succeeded in 1 usecs [drm] UVD initialized successfully. [drm] ib test on ring 0 succeeded in 0 usecs [drm] ib test on ring 5 succeeded [drm] radeon atom DIG backlight initialized [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA-1 [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] LVDS-1 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] LCD1: INTERNAL_KLDSCP_LVTMA tsc: Refined TSC clocksource calibration: 2793.005 MHz clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284271067f7, max_idle_ns: 440795289777 ns switching from power state: ui class: none internal class: boot caps: uvd vclk: 0 dclk: 0 power level 0 sclk: 50000 vddc_index: 2 power level 1 sclk: 50000 vddc_index: 2 status: c b switching to power state: ui class: performance internal class: none caps: uvd vclk: 0 dclk: 0 power level 0 sclk: 20000 vddc_index: 2 power level 1 sclk: 50000 vddc_index: 2 status: r [drm] fb mappable at 0xD0359000 [drm] vram apper at 0xD0000000 [drm] size 5787648 [drm] fb depth is 24 [drm] pitch is 6400 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 200x56 radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.43.0 20080528 for 0000:01:05.0 on minor 0 radeon 0000:02:00.0: enabling device (0000 -> 0003) [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x103C:0x1443). [drm] register mmio base: 0xF0200000 [drm] register mmio size: 131072 vga_switcheroo: enabled ATPX version 1, functions 0x00000027 ATOM BIOS: HP radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [drm] Detected VRAM RAM=512M, BAR=256M [drm] RAM width 64bits DDR [drm] radeon: 512M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Loading CEDAR Microcode [drm] Internal thermal controller without fan control == power state 0 == ui class: none internal class: boot caps: video uvd vclk: 0 dclk: 0 power level 0 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 power level 1 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 status: c r b == power state 1 == ui class: performance internal class: none caps: single_disp video uvd vclk: 0 dclk: 0 power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 power level 1 sclk: 40000 mclk: 50000 vddc: 900 vddci: 0 power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 status: == power state 2 == ui class: none internal class: uvd caps: video uvd vclk: 50000 dclk: 40000 power level 0 sclk: 50000 mclk: 80000 vddc: 1120 vddci: 0 power level 1 sclk: 50000 mclk: 80000 vddc: 1120 vddci: 0 power level 2 sclk: 50000 mclk: 80000 vddc: 1120 vddci: 0 status: == power state 3 == ui class: performance internal class: none caps: video uvd vclk: 0 dclk: 0 power level 0 sclk: 40500 mclk: 80000 vddc: 900 vddci: 0 power level 1 sclk: 40500 mclk: 80000 vddc: 900 vddci: 0 power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 status: == power state 4 == ui class: battery internal class: none caps: single_disp video uvd vclk: 0 dclk: 0 power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 power level 1 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 status: == power state 5 == ui class: battery internal class: none caps: video uvd vclk: 0 dclk: 0 power level 0 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 power level 1 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 status: == power state 6 == ui class: battery internal class: uvd_hd caps: video uvd vclk: 40000 dclk: 30000 power level 0 sclk: 45000 mclk: 50000 vddc: 900 vddci: 0 power level 1 sclk: 45000 mclk: 50000 vddc: 900 vddci: 0 power level 2 sclk: 45000 mclk: 50000 vddc: 900 vddci: 0 status: == power state 7 == ui class: battery internal class: uvd_sd caps: video uvd vclk: 10000 dclk: 10000 power level 0 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 power level 1 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 status: == power state 8 == ui class: none internal class: limited_pwr caps: video uvd vclk: 0 dclk: 0 power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 power level 1 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 power level 2 sclk: 30000 mclk: 30000 vddc: 900 vddci: 0 status: [drm] radeon: dpm initialized [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [drm] PCIE GART of 512M enabled (table at 0x000000000025E000). radeon 0000:02:00.0: WB enabled radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880215d7ac00 radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880215d7ac0c radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. radeon 0000:02:00.0: radeon: MSI limited to 32-bit radeon 0000:02:00.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] ring test on 0 succeeded in 1 usecs [drm] ring test on 3 succeeded in 3 usecs [drm] ring test on 5 succeeded in 1 usecs [drm] UVD initialized successfully. [drm] ib test on ring 0 succeeded in 0 usecs [drm] ib test on ring 3 succeeded in 0 usecs clocksource: Switched to clocksource tsc [drm] ib test on ring 5 succeeded [drm] radeon atom DIG backlight initialized [drm] Radeon Display Connectors [drm] Connector 0: [drm] LVDS-2 [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [drm] Encoders: [drm] LCD1: INTERNAL_UNIPHY [drm] Connector 1: [drm] HDMI-A-1 [drm] HPD1 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY1 [drm] Connector 2: [drm] VGA-2 [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 switching from power state: ui class: none internal class: boot caps: video uvd vclk: 0 dclk: 0 power level 0 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 power level 1 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 status: c b switching to power state: ui class: performance internal class: none caps: single_disp video uvd vclk: 0 dclk: 0 power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 power level 1 sclk: 40000 mclk: 50000 vddc: 900 vddci: 0 power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 status: r radeon 0000:02:00.0: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 [drm] fb mappable at 0xE035F000 [drm] vram apper at 0xE0000000 [drm] size 3145728 [drm] fb depth is 24 [drm] pitch is 4096 radeon 0000:02:00.0: fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.43.0 20080528 for 0000:02:00.0 on minor 1 ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 3 Gbps 0xb impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs scsi host0: ahci scsi host1: ahci scsi host2: ahci scsi host3: ahci ata1: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508100 irq 19 ata2: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508180 irq 19 ata3: DUMMY ata4: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508280 irq 19 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver QUIRK: Enable AMD PLL fix ehci-pci 0000:00:12.2: EHCI Host Controller ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci-pci 0000:00:12.2: debug port 1 ehci-pci 0000:00:12.2: irq 17, io mem 0xf0508600 ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ehci-pci 0000:00:13.2: EHCI Host Controller ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci-pci 0000:00:13.2: debug port 1 ehci-pci 0000:00:13.2: irq 17, io mem 0xf0508500 ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ehci-pci 0000:00:16.2: EHCI Host Controller ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci-pci 0000:00:16.2: debug port 1 ehci-pci 0000:00:16.2: irq 17, io mem 0xf0508400 ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci 0000:00:12.0: OHCI PCI host controller ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 ohci-pci 0000:00:12.0: irq 18, io mem 0xf0507000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected ohci-pci 0000:00:13.0: OHCI PCI host controller ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci-pci 0000:00:13.0: irq 18, io mem 0xf0506000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ohci-pci 0000:00:14.5: OHCI PCI host controller ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 ohci-pci 0000:00:14.5: irq 18, io mem 0xf0505000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ata4: SATA link down (SStatus 0 SControl 300) ohci-pci 0000:00:16.0: OHCI PCI host controller ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 ohci-pci 0000:00:16.0: irq 18, io mem 0xf0504000 usb 1-3: new high-speed USB device number 2 using ehci-pci hub 7-0:1.0: USB hub found hub 7-0:1.0: 4 ports detected i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 usb 3-2: new high-speed USB device number 2 using ehci-pci serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs NET: Registered protocol family 17 microcode: CPU0: patch_level=0x010000c8 microcode: CPU1: patch_level=0x010000c8 microcode: Microcode Update Driver: v2.01 , Peter Oruba Loading compiled-in X.509 certificates Loaded X.509 cert 'Dynato Kyma: J-V Peetz: 261d6553480aba7c1e14b1c3dda571778022e170' input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 rtc_cmos 00:01: setting system clock to 2016-03-07 14:06:34 UTC (1457359594) acpi-cpufreq: overriding BIOS provided _PSD data ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: hp DVD RW AD-7586H, KH04, max UDMA/100 ata2.00: configured for UDMA/100 ata1.00: ATA-8: OCZ-VERTEX2, 1.35, max UDMA/133 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.35 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) sd 0:0:0:0: [sda] Write Protect is off scsi 1:0:0:0: CD-ROM hp DVD RW AD-7586H KH04 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk usb 6-1: new full-speed USB device number 2 using ohci-pci sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 756K (ffffffff817b4000 - ffffffff81871000) random: systemd-udevd urandom read with 41 bits of entropy available sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xffffc90000eb8000, 64:31:50:62:1e:bf, XID 083000c0 IRQ 28 r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) hp_accel: hardware type DV7 found wmi: Mapper loaded acpi device:03: registered as cooling_device2 lis3lv02d: 8 bits sensor found input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5 ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) acpi device:08: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6 snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_idt hdaudioC0D0: inputs: snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 ath: phy0: Enable LNA combining ath: phy0: ASPM enabled: 0x43 ath: EEPROM regdomain: 0x60 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x60 snd_hda_codec_idt hdaudioC0D0: Mic=0xa input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input8 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90001fe0000, irq=17 r8169 0000:04:00.0 enp4s0: renamed from eth0 ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236) ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88021743e320), AE_AML_BUFFER_LIMIT (20150930/psparse-542) ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88021743e500), AE_AML_BUFFER_LIMIT (20150930/psparse-542) ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236) ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88021743e320), AE_AML_BUFFER_LIMIT (20150930/psparse-542) ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88021743e500), AE_AML_BUFFER_LIMIT (20150930/psparse-542) ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236) ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88021743e320), AE_AML_BUFFER_LIMIT (20150930/psparse-542) ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88021743e500), AE_AML_BUFFER_LIMIT (20150930/psparse-542) input: HP WMI hotkeys as /devices/virtual/input/input9 ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236) ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88021743e320), AE_AML_BUFFER_LIMIT (20150930/psparse-542) ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88021743e500), AE_AML_BUFFER_LIMIT (20150930/psparse-542) ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236) ACPI Error: Method parse/execution failed [\_SB.WMID.HWMC] (Node ffff88021743e320), AE_AML_BUFFER_LIMIT (20150930/psparse-542) ACPI Error: Method parse/execution failed [\_SB.WMID.WMAD] (Node ffff88021743e500), AE_AML_BUFFER_LIMIT (20150930/psparse-542) usbcore: registered new interface driver usb-storage usbcore: registered new interface driver uas input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 ums-realtek 3-2:1.0: USB Mass Storage device detected usb 3-2: USB disconnect, device number 2 scsi host4: usb-storage 3-2:1.0 usbcore: registered new interface driver ums-realtek ath9k 0000:03:00.0 wlo2: renamed from wlan0 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device 2SF022 (0bda:5801) input: 2SF022 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input13 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) psmouse serio1: synaptics: queried max coordinates: x [..5672], y [..4550] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400/0x0, board id: 0, fw id: 631163 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12 EXT4-fs (sda1): re-mounted. Opts: (null) EXT4-fs (sda1): re-mounted. Opts: nobarrier,errors=remount-ro Adding 1048572k swap on /var/swapfile1. Priority:-1 extents:5 across:1081340k SS loop: module loaded EXT4-fs (sda2): barriers disabled EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: nobarrier,errors=remount-ro r8169 0000:04:00.0 enp4s0: link down r8169 0000:04:00.0 enp4s0: link down random: nonblocking pool is initialized snd_hda_intel 0000:02:00.1: Disabling via vga_switcheroo r8169 0000:04:00.0 enp4s0: link up [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [drm] PCIE GART of 512M enabled (table at 0x000000000025E000). radeon 0000:02:00.0: WB enabled radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880215d7ac00 radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880215d7ac0c radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000341c418 [drm] ring test on 0 succeeded in 1 usecs [drm] ring test on 3 succeeded in 2 usecs [drm] ring test on 5 succeeded in 1 usecs [drm] UVD initialized successfully. [drm] ib test on ring 0 succeeded in 0 usecs [drm] ib test on ring 3 succeeded in 0 usecs [drm] ib test on ring 5 succeeded switching from power state: ui class: none internal class: boot caps: video uvd vclk: 0 dclk: 0 power level 0 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 power level 1 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 status: c b switching to power state: ui class: performance internal class: none caps: single_disp video uvd vclk: 0 dclk: 0 power level 0 sclk: 15700 mclk: 20000 vddc: 900 vddci: 0 power level 1 sclk: 40000 mclk: 50000 vddc: 900 vddci: 0 power level 2 sclk: 75000 mclk: 80000 vddc: 1120 vddci: 0 status: r snd_hda_intel 0000:02:00.1: Enabling via vga_switcheroo snd_hda_intel 0000:02:00.1: CORB reset timeout#2, CORBRP = 65535 vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none vgaarb: device changed decodes: PCI:0000:01:05.0,olddecodes=io+mem,decodes=none:owns=io+mem snd_hda_intel 0000:02:00.1: Disabling via vga_switcheroo