[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160308203444.GA27132@localhost>
Date: Tue, 8 Mar 2016 14:34:44 -0600
From: Bjorn Helgaas <helgaas@...nel.org>
To: Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>
Cc: bhelgaas@...gle.com, michals@...inx.com, lorenzo.pieralisi@....com,
paul.burton@...tec.com, yinghai@...nel.org, wangyijing@...wei.com,
robh@...nel.org, russell.joyce@...k.ac.uk, sorenb@...inx.com,
jiang.liu@...ux.intel.com, arnd@...db.de, pawel.moll@....com,
mark.rutland@....com, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org,
Bharat Kumar Gogada <bharatku@...inx.com>
Subject: Re: [PATCH V4 0/5] PCIe Xilinx generic driver for Microblaze and
On Thu, Feb 11, 2016 at 09:58:06PM +0530, Bharat Kumar Gogada wrote:
> This patch series does modifications to pcie-xilinx.c, to support common
> driver on both Zynq and Microblaze architectures.
> Microblaze pci-common.c has been modified to support generic driver.
>
> Bharat Kumar Gogada (5):
> PCI: xilinx: Removing xilinx_pcie_parse_and_add_res function
> PCI: xilinx: Removing struct hw_pci structure.
> PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both
> Zynq and Microblaze
> PCI: xilinx: Updating Zynq PCI binding documentation with
> Microblaze node.
> Microblaze: Modifying microblaze PCI subsytem to support generic
> Xilinx AXI PCIe Host Bridge IP driver
>
> .../devicetree/bindings/pci/xilinx-pcie.txt | 32 +++-
> arch/microblaze/Kconfig | 3 +
> arch/microblaze/pci/pci-common.c | 56 ++----
> drivers/pci/host/Kconfig | 2 +-
> drivers/pci/host/pcie-xilinx.c | 191 +++------------------
> 5 files changed, 66 insertions(+), 218 deletions(-)
I applied this series to my pci/host-xilinx branch for v4.6.
Michal, you only explicitly acked the last patch, but that only makes
sense if I apply the whole series, so I applied your ack to all the
patches.
Someday somebody should rework pci_fixup_irqs() so that doesn't have
to be arch-dependent.
I reworked the changelogs as below.
Bjorn
commit 01cf9d524ff0
Author: Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>
Date: Thu Feb 11 21:58:11 2016 +0530
microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver
Modify the Microblaze PCI subsystem to work with the generic
drivers/pci/host/pcie-xilinx.c driver on Microblaze and Zynq.
[bhelgaas: changelog]
Signed-off-by: Bharat Kumar Gogada <bharatku@...inx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@...inx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Acked-by: Michal Simek <michal.simek@...inx.com>
commit e5d4b2006c97
Author: Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>
Date: Thu Feb 11 21:58:10 2016 +0530
PCI: xilinx: Update Zynq binding with Microblaze node
Update Zynq PCI binding documentation with Microblaze node.
[bhelgaas: fix "microbalze_0_intc" typo]
Signed-off-by: Bharat Kumar Gogada <bharatku@...inx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@...inx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Acked-by: Rob Herring <robh@...nel.org>
Acked-by: Michal Simek <michal.simek@...inx.com>
commit 2c51391d2559
Author: Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>
Date: Thu Feb 11 21:58:09 2016 +0530
PCI: xilinx: Don't call pci_fixup_irqs() on Microblaze
The Xilinx AXI PCIe Host Bridge Soft IP driver was previously only
supported on ARM (in particular, on ARCH_ZYNC), and pci_fixup_irqs() is
available there. But Microblaze will do IRQ fixup in pcibios_add_device(),
so pci_fixup_irqs() is not available on Microblaze.
Don't call pci_fixup_irqs() on Microblaze, so the driver can work on both
Zynq and Microblaze Architectures.
[bhelgaas: revise changelog to show similarity to bdb8a1844f31 ("PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM")]
Signed-off-by: Bharat Kumar Gogada <bharatku@...inx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@...inx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Reviewed-by: Arnd Bergmann <arnd@...db.de>
Acked-by: Michal Simek <michal.simek@...inx.com>
commit 4c01f3b089a0
Author: Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>
Date: Thu Feb 11 21:58:08 2016 +0530
PCI: xilinx: Remove dependency on ARM-specific struct hw_pci
The Xilinx PCIe host controller driver uses pci_common_init_dev(), which
is ARM-specific and requires the ARM struct hw_pci. The part of
pci_common_init_dev() that is needed is limited and can be done here
without using hw_pci.
Create and scan the root bus directly without using the ARM
pci_common_init_dev() interface.
[bhelgaas: revise changelog to show similarity to 79953dd22c1d ("PCI: rcar: Remove dependency on ARM-specific struct hw_pci")]
Signed-off-by: Bharat Kumar Gogada <bharatku@...inx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@...inx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Reviewed-by: Arnd Bergmann <arnd@...db.de>
Acked-by: Michal Simek <michal.simek@...inx.com>
commit 0259882e342e
Author: Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>
Date: Thu Feb 11 21:58:07 2016 +0530
PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DT
Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF
DT parser.
[bhelgaas: revise changelog to show similarity to 0021d22b73d6 ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT")]
Signed-off-by: Bharat Kumar Gogada <bharatku@...inx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@...inx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Reviewed-by: Arnd Bergmann <arnd@...db.de>
Acked-by: Michal Simek <michal.simek@...inx.com>
Powered by blists - more mailing lists