| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20160308000316.017199388@linuxfoundation.org>
Date: Mon, 7 Mar 2016 16:02:47 -0800
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Mike Christie <mchristi@...hat.com>,
Nicholas Bellinger <nab@...ux-iscsi.org>,
Kamal Mostafa <kamal@...onical.com>
Subject: [PATCH 4.4 22/74] target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Christie <mchristi@...hat.com>
commit 8a9ebe717a133ba7bc90b06047f43cc6b8bcb8b3 upstream.
In a couple places we are not converting to/from the Linux
block layer 512 bytes sectors.
1.
The request queue values and what we do are a mismatch of
things:
max_discard_sectors - This is in linux block layer 512 byte
sectors. We are just copying this to max_unmap_lba_count.
discard_granularity - This is in bytes. We are converting it
to Linux block layer 512 byte sectors.
discard_alignment - This is in bytes. We are just copying
this over.
The problem is that the core LIO code exports these values in
spc_emulate_evpd_b0 and we use them to test request arguments
in sbc_execute_unmap, but we never convert to the block size
we export to the initiator. If we are not using 512 byte sectors
then we are exporting the wrong values or are checks are off.
And, for the discard_alignment/bytes case we are just plain messed
up.
2.
blkdev_issue_discard's start and number of sector arguments
are supposed to be in linux block layer 512 byte sectors. We are
currently passing in the values we get from the initiator which
might be based on some other sector size.
There is a similar problem in iblock_execute_write_same where
the bio functions want values in 512 byte sectors but we are
passing in what we got from the initiator.
Signed-off-by: Mike Christie <mchristi@...hat.com>
Signed-off-by: Nicholas Bellinger <nab@...ux-iscsi.org>
[ kamal: backport to 4.4-stable: no unmap_zeroes_data ]
Signed-off-by: Kamal Mostafa <kamal@...onical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/target/target_core_device.c | 43 ++++++++++++++++++++++++++
drivers/target/target_core_file.c | 29 +++++-------------
drivers/target/target_core_iblock.c | 56 ++++++++---------------------------
include/target/target_core_backend.h | 3 +
4 files changed, 69 insertions(+), 62 deletions(-)
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -826,6 +826,49 @@ struct se_device *target_alloc_device(st
return dev;
}
+/*
+ * Check if the underlying struct block_device request_queue supports
+ * the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM
+ * in ATA and we need to set TPE=1
+ */
+bool target_configure_unmap_from_queue(struct se_dev_attrib *attrib,
+ struct request_queue *q, int block_size)
+{
+ if (!blk_queue_discard(q))
+ return false;
+
+ attrib->max_unmap_lba_count = (q->limits.max_discard_sectors << 9) /
+ block_size;
+ /*
+ * Currently hardcoded to 1 in Linux/SCSI code..
+ */
+ attrib->max_unmap_block_desc_count = 1;
+ attrib->unmap_granularity = q->limits.discard_granularity / block_size;
+ attrib->unmap_granularity_alignment = q->limits.discard_alignment /
+ block_size;
+ return true;
+}
+EXPORT_SYMBOL(target_configure_unmap_from_queue);
+
+/*
+ * Convert from blocksize advertised to the initiator to the 512 byte
+ * units unconditionally used by the Linux block layer.
+ */
+sector_t target_to_linux_sector(struct se_device *dev, sector_t lb)
+{
+ switch (dev->dev_attrib.block_size) {
+ case 4096:
+ return lb << 3;
+ case 2048:
+ return lb << 2;
+ case 1024:
+ return lb << 1;
+ default:
+ return lb;
+ }
+}
+EXPORT_SYMBOL(target_to_linux_sector);
+
int target_configure_device(struct se_device *dev)
{
struct se_hba *hba = dev->se_hba;
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -160,25 +160,11 @@ static int fd_configure_device(struct se
" block_device blocks: %llu logical_block_size: %d\n",
dev_size, div_u64(dev_size, fd_dev->fd_block_size),
fd_dev->fd_block_size);
- /*
- * Check if the underlying struct block_device request_queue supports
- * the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM
- * in ATA and we need to set TPE=1
- */
- if (blk_queue_discard(q)) {
- dev->dev_attrib.max_unmap_lba_count =
- q->limits.max_discard_sectors;
- /*
- * Currently hardcoded to 1 in Linux/SCSI code..
- */
- dev->dev_attrib.max_unmap_block_desc_count = 1;
- dev->dev_attrib.unmap_granularity =
- q->limits.discard_granularity >> 9;
- dev->dev_attrib.unmap_granularity_alignment =
- q->limits.discard_alignment;
+
+ if (target_configure_unmap_from_queue(&dev->dev_attrib, q,
+ fd_dev->fd_block_size))
pr_debug("IFILE: BLOCK Discard support available,"
- " disabled by default\n");
- }
+ " disabled by default\n");
/*
* Enable write same emulation for IBLOCK and use 0xFFFF as
* the smaller WRITE_SAME(10) only has a two-byte block count.
@@ -490,9 +476,12 @@ fd_execute_unmap(struct se_cmd *cmd, sec
if (S_ISBLK(inode->i_mode)) {
/* The backend is block device, use discard */
struct block_device *bdev = inode->i_bdev;
+ struct se_device *dev = cmd->se_dev;
- ret = blkdev_issue_discard(bdev, lba,
- nolb, GFP_KERNEL, 0);
+ ret = blkdev_issue_discard(bdev,
+ target_to_linux_sector(dev, lba),
+ target_to_linux_sector(dev, nolb),
+ GFP_KERNEL, 0);
if (ret < 0) {
pr_warn("FILEIO: blkdev_issue_discard() failed: %d\n",
ret);
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -121,27 +121,11 @@ static int iblock_configure_device(struc
dev->dev_attrib.hw_max_sectors = queue_max_hw_sectors(q);
dev->dev_attrib.hw_queue_depth = q->nr_requests;
- /*
- * Check if the underlying struct block_device request_queue supports
- * the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM
- * in ATA and we need to set TPE=1
- */
- if (blk_queue_discard(q)) {
- dev->dev_attrib.max_unmap_lba_count =
- q->limits.max_discard_sectors;
-
- /*
- * Currently hardcoded to 1 in Linux/SCSI code..
- */
- dev->dev_attrib.max_unmap_block_desc_count = 1;
- dev->dev_attrib.unmap_granularity =
- q->limits.discard_granularity >> 9;
- dev->dev_attrib.unmap_granularity_alignment =
- q->limits.discard_alignment;
-
+ if (target_configure_unmap_from_queue(&dev->dev_attrib, q,
+ dev->dev_attrib.hw_block_size))
pr_debug("IBLOCK: BLOCK Discard support available,"
- " disabled by default\n");
- }
+ " disabled by default\n");
+
/*
* Enable write same emulation for IBLOCK and use 0xFFFF as
* the smaller WRITE_SAME(10) only has a two-byte block count.
@@ -413,9 +397,13 @@ static sense_reason_t
iblock_execute_unmap(struct se_cmd *cmd, sector_t lba, sector_t nolb)
{
struct block_device *bdev = IBLOCK_DEV(cmd->se_dev)->ibd_bd;
+ struct se_device *dev = cmd->se_dev;
int ret;
- ret = blkdev_issue_discard(bdev, lba, nolb, GFP_KERNEL, 0);
+ ret = blkdev_issue_discard(bdev,
+ target_to_linux_sector(dev, lba),
+ target_to_linux_sector(dev, nolb),
+ GFP_KERNEL, 0);
if (ret < 0) {
pr_err("blkdev_issue_discard() failed: %d\n", ret);
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
@@ -431,8 +419,10 @@ iblock_execute_write_same(struct se_cmd
struct scatterlist *sg;
struct bio *bio;
struct bio_list list;
- sector_t block_lba = cmd->t_task_lba;
- sector_t sectors = sbc_get_write_same_sectors(cmd);
+ struct se_device *dev = cmd->se_dev;
+ sector_t block_lba = target_to_linux_sector(dev, cmd->t_task_lba);
+ sector_t sectors = target_to_linux_sector(dev,
+ sbc_get_write_same_sectors(cmd));
if (cmd->prot_op) {
pr_err("WRITE_SAME: Protection information with IBLOCK"
@@ -646,12 +636,12 @@ iblock_execute_rw(struct se_cmd *cmd, st
enum dma_data_direction data_direction)
{
struct se_device *dev = cmd->se_dev;
+ sector_t block_lba = target_to_linux_sector(dev, cmd->t_task_lba);
struct iblock_req *ibr;
struct bio *bio, *bio_start;
struct bio_list list;
struct scatterlist *sg;
u32 sg_num = sgl_nents;
- sector_t block_lba;
unsigned bio_cnt;
int rw = 0;
int i;
@@ -677,24 +667,6 @@ iblock_execute_rw(struct se_cmd *cmd, st
rw = READ;
}
- /*
- * Convert the blocksize advertised to the initiator to the 512 byte
- * units unconditionally used by the Linux block layer.
- */
- if (dev->dev_attrib.block_size == 4096)
- block_lba = (cmd->t_task_lba << 3);
- else if (dev->dev_attrib.block_size == 2048)
- block_lba = (cmd->t_task_lba << 2);
- else if (dev->dev_attrib.block_size == 1024)
- block_lba = (cmd->t_task_lba << 1);
- else if (dev->dev_attrib.block_size == 512)
- block_lba = cmd->t_task_lba;
- else {
- pr_err("Unsupported SCSI -> BLOCK LBA conversion:"
- " %u\n", dev->dev_attrib.block_size);
- return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- }
-
ibr = kzalloc(sizeof(struct iblock_req), GFP_KERNEL);
if (!ibr)
goto fail;
--- a/include/target/target_core_backend.h
+++ b/include/target/target_core_backend.h
@@ -94,5 +94,8 @@ sense_reason_t passthrough_parse_cdb(str
sense_reason_t (*exec_cmd)(struct se_cmd *cmd));
bool target_sense_desc_format(struct se_device *dev);
+sector_t target_to_linux_sector(struct se_device *dev, sector_t lb);
+bool target_configure_unmap_from_queue(struct se_dev_attrib *attrib,
+ struct request_queue *q, int block_size);
#endif /* TARGET_CORE_BACKEND_H */
Powered by blists - more mailing lists