[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1457455195-1938-1-git-send-email-sre@kernel.org>
Date: Tue, 8 Mar 2016 17:39:32 +0100
From: Sebastian Reichel <sre@...nel.org>
To: Sebastian Reichel <sre@...nel.org>,
Tony Lindgren <tony@...mide.com>,
Aaro Koskinen <aaro.koskinen@....fi>,
Tomi Valkeinen <tomi.valkeinen@...com>
Cc: Laurent Pinchart <laurent.pinchart@...asonboard.com>,
David Airlie <airlied@...ux.ie>, linux-omap@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: [PATCH 00/23] Nokia N950 display support
Hi,
This series adds support for the Nokia N950 display.
Since the panel is using DSI command mode, it involves
adding support for manually updated displays to
omapdrm.
The following patches, that are based on 4.5-rc7
were tested with fbcon and Xorg (from Debian sid)
on the N950.
-- Sebastian
Sebastian Reichel (22):
ARM: dts: n9/n950: regulator configuration
ARM: dts: n950: add display support
drm: omapdrm: add DSI mapping
Revert "drm: omapdrm: Remove manual update display support"
drm: omapdrm: wait for pending operations before updating plane
drm: omapdrm: crtc: switch pending variable to atomic bitset
drm: omapdrm: crtc: add enabled bit to state
drm: omapdrm: dss: method to get stallmode from lcd config
drm: omapdrm: crtc: detect manually updated displays
include: video: omapdss: provide fifo threshold methods
drm: omapdrm: plane: update fifo size on atomic update
drm: omapdrm: crtc: update plane fifos on lcd config change
drm: omapdrm: crtc: save framedone callback from dss
drm: omapdrm: crtc: add support for manual updated displays
drm: omapdrm: update manual displays on dirty ioctl
drm: omapdrm: panel-dsi-cm: add regulator support
drm: omapdrm: panel-dsi-cm: use threaded irq handler
drm: omapdrm: panel-dsi-cm: improve DT support
drm: omapdrm: panel-dsi-cm: add offset support
drm: omapdrm: panel-dsi-cm: block disable until update completed
drm: omapdrm: panel-dsi-cm: ratelimit debug output in update path
drm: omapdrm: panel-dsi-cm: provide timings methods for omapdrm
Tomi Valkeinen (1):
drm: omapdrm: dss: reset dsi module during initialization
arch/arm/boot/dts/omap3-n950-n9.dtsi | 72 +++++++++
arch/arm/boot/dts/omap3-n950.dts | 71 +++++++++
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 163 ++++++++++++++++++---
drivers/gpu/drm/omapdrm/dss/dsi.c | 24 +++
drivers/gpu/drm/omapdrm/dss/output.c | 6 +
drivers/gpu/drm/omapdrm/omap_crtc.c | 185 +++++++++++++++++++++---
drivers/gpu/drm/omapdrm/omap_drv.c | 6 +
drivers/gpu/drm/omapdrm/omap_drv.h | 6 +
drivers/gpu/drm/omapdrm/omap_fb.c | 38 +++++
drivers/gpu/drm/omapdrm/omap_fbdev.c | 57 +++++++-
drivers/gpu/drm/omapdrm/omap_plane.c | 23 +++
include/video/omapdss.h | 7 +
12 files changed, 616 insertions(+), 42 deletions(-)
--
2.7.0
Powered by blists - more mailing lists