linux-kernel - Re: [PATCH v3] HID: i2c-hid: Fix suspend/resume when already runtime suspended

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 9 Mar 2016 14:04:11 +0200
From:	Mika Westerberg <mika.westerberg@...ux.intel.com>
To:	Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc:	Jiri Kosina <jikos@...nel.org>,
	Benjamin Tissoires <benjamin.tissoires@...hat.com>,
	Andrew Duggan <aduggan@...aptics.com>,
	Benson Leung <bleung@...omium.org>,
	Dan Carpenter <dan.carpenter@...cle.com>,
	Gabriele Mazzotta <gabriele.mzt@...il.com>,
	Doug Anderson <dianders@...omium.org>,
	linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
	"Rafael J. Wysocki" <rjw@...ysocki.net>
Subject: Re: [PATCH v3] HID: i2c-hid: Fix suspend/resume when already runtime
 suspended

On Tue, Mar 08, 2016 at 03:03:23PM -0800, Dmitry Torokhov wrote:
> On ACPI-based systems ACPI power domain code runtime resumes device before
> calling suspend method, which ensures that i2c-hid suspend code starts with
> device not in low-power state and with interrupts enabled.
> 
> On other systems, especially if device is not a part of any power domain,
> we may end up calling driver's system-level suspend routine while the
> device is runtime-suspended (with controller in presumably low power state
> and interrupts disabled). This will result in interrupts being essentially
> disabled twice, and we will only re-enable them after both system resume
> and runtime resume methods complete. Unfortunately i2c_hid_resume() calls
> i2c_hid_hwreset() and that only works properly if interrupts are enabled.
> 
> Also if device is runtime-suspended driver's suspend code may fail if it
> tries to issue I/O requests.
> 
> Let's fix it by runtime-resuming the device if we need to run HID driver's
> suspend code and also disabling interrupts only if device is not already
> runtime-suspended. Also on resume we mark the device as running at full
> power (since that is what resetting will do to it).
> 
> Signed-off-by: Doug Anderson <dianders@...omium.org>
> Signed-off-by: Dmitry Torokhov <dtor@...omium.org>

Tested on a couple of Intel Skylake and Baytrail based systems and power
management of I2C connected HID devices still seems to work just fine.

Tested-by: Mika Westerberg <mika.westerberg@...ux.intel.com>