lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 11 Mar 2016 18:55:27 +0800 From: Caesar Wang <wxt@...k-chips.com> To: Heiko Stuebner <heiko@...ech.de>, "David S. Miller" <davem@...emloft.net>, Rob Herring <robh+dt@...nel.org> Cc: linux-rockchip@...ts.infradead.org, keescook@...gle.com, leozwang@...gle.com, Caesar Wang <wxt@...k-chips.com>, Pawel Moll <pawel.moll@....com>, Mark Rutland <mark.rutland@....com>, Ian Campbell <ijc+devicetree@...lion.org.uk>, Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org Subject: [PATCH 2/6] net: arc_emac: add phy-reset-* are optional for device tree This patch adds the following property for arc_emac. 1) phy-reset-gpios: The phy-reset-gpios is an optional property for arc emac device tree boot. Change the binding document to match the driver code. 2) phy-reset-duration: Different boards may require different phy reset duration. Add property phy-reset-duration for device tree probe, so that the boards that need a longer reset duration can specify it in their device tree. 3) phy-reset-active-high: We need that for a custom hardware that needs the reverse reset sequence. Anyway, we can add the above property for arc emac. Signed-off-by: Caesar Wang <wxt@...k-chips.com> --- Documentation/devicetree/bindings/net/arc_emac.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt index a1d71eb..6389b00 100644 --- a/Documentation/devicetree/bindings/net/arc_emac.txt +++ b/Documentation/devicetree/bindings/net/arc_emac.txt @@ -7,6 +7,16 @@ Required properties: - max-speed: see ethernet.txt file in the same directory. - phy: see ethernet.txt file in the same directory. +Optional properties: +- phy-reset-gpios : Should specify the gpio for phy reset +- phy-reset-duration : Reset duration in milliseconds. Should present + only if property "phy-reset-gpios" is available. Missing the property + will have the duration be 1 millisecond. Numbers greater than 1000 are + invalid and 1 millisecond will be used instead. +- phy-reset-active-high : If present then the reset sequence using the GPIO + specified in the "phy-reset-gpios" property is reversed (H=reset state, + L=operation state). + Clock handling: The clock frequency is needed to calculate and set polling period of EMAC. It must be provided by one of: -- 1.9.1
Powered by blists - more mailing lists