| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1457917974-314-1-git-send-email-cw00.choi@samsung.com>
Date: Mon, 14 Mar 2016 10:12:54 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: k.kozlowski@...sung.com, kgene@...nel.org
Cc: linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Chanwoo Choi <cw00.choi@...sung.com>,
Kukjin Kim <kgene.kim@...sung.com>
Subject: [PATCH] ARM: dts: Add initial pin configuration for exynos3250-rinato
This patch adds initial pin configuration using pinctrl subsystem
to reduce leakage power-consumption of gpio pins in normal state.
All pins included in this patch are NC (not connected) pin.
Cc: Kukjin Kim <kgene.kim@...sung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
---
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 38 +++++++++++++++++
arch/arm/boot/dts/exynos3250-rinato.dts | 70 ++++++++++++++++++++++++++++++-
2 files changed, 106 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 5ab81c39e2c9..ecf79386e891 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -16,11 +16,49 @@
#define PIN_PULL_DOWN 1
#define PIN_PULL_UP 3
+#define PIN_DRV_LV1 0
+#define PIN_DRV_LV2 2
+#define PIN_DRV_LV3 1
+#define PIN_DRV_LV4 3
+
#define PIN_PDN_OUT0 0
#define PIN_PDN_OUT1 1
#define PIN_PDN_INPUT 2
#define PIN_PDN_PREV 3
+#define PIN_IN(_pin, _pull, _drv) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-function = <0>; \
+ samsung,pin-pud = <PIN_PULL_ ##_pull>; \
+ samsung,pin-drv = <PIN_DRV_ ##_drv>; \
+ }
+
+#define PIN_OUT(_pin, _drv) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-function = <1>; \
+ samsung,pin-pud = <0>; \
+ samsung,pin-drv = <PIN_DRV_ ##_drv>; \
+ }
+
+#define PIN_OUT_SET(_pin, _val, _drv) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-function = <1>; \
+ samsung,pin-pud = <0>; \
+ samsung,pin-drv = <PIN_DRV_ ##_drv>; \
+ samsung,pin-val = <_val>; \
+ }
+
+#define PIN_CFG(_pin, _sel, _pull, _drv) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-function = <_sel>; \
+ samsung,pin-pud = <PIN_PULL_ ##_pull>; \
+ samsung,pin-drv = <PIN_DRV_ ##_drv>; \
+ }
+
#define PIN_SLP(_pin, _mode, _pull) \
_pin { \
samsung,pins = #_pin; \
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 3e64d5dcdd60..1c78a2153776 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -681,7 +681,21 @@
&pinctrl_0 {
pinctrl-names = "default";
- pinctrl-0 = <&sleep0>;
+ pinctrl-0 = <&initial0 &sleep0>;
+
+ initial0: initial-state {
+ PIN_IN(gpa1-4, DOWN, LV1);
+ PIN_IN(gpa1-5, DOWN, LV1);
+
+ PIN_IN(gpc0-0, DOWN, LV1);
+ PIN_IN(gpc0-1, DOWN, LV1);
+ PIN_IN(gpc0-2, DOWN, LV1);
+ PIN_IN(gpc0-3, DOWN, LV1);
+ PIN_IN(gpc0-4, DOWN, LV1);
+
+ PIN_IN(gpd0-0, DOWN, LV1);
+ PIN_IN(gpd0-1, DOWN, LV1);
+ };
sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, DOWN);
@@ -735,7 +749,59 @@
&pinctrl_1 {
pinctrl-names = "default";
- pinctrl-0 = <&sleep1>;
+ pinctrl-0 = <&initial1 &sleep1>;
+
+ initial1: initial-state {
+ PIN_IN(gpe0-6, DOWN, LV1);
+ PIN_IN(gpe0-7, DOWN, LV1);
+
+ PIN_IN(gpe1-0, DOWN, LV1);
+ PIN_IN(gpe1-3, DOWN, LV1);
+ PIN_IN(gpe1-4, DOWN, LV1);
+ PIN_IN(gpe1-5, DOWN, LV1);
+ PIN_IN(gpe1-6, DOWN, LV1);
+
+ PIN_IN(gpk2-0, DOWN, LV1);
+ PIN_IN(gpk2-1, DOWN, LV1);
+ PIN_IN(gpk2-2, DOWN, LV1);
+ PIN_IN(gpk2-3, DOWN, LV1);
+ PIN_IN(gpk2-4, DOWN, LV1);
+ PIN_IN(gpk2-5, DOWN, LV1);
+ PIN_IN(gpk2-6, DOWN, LV1);
+
+ PIN_IN(gpm0-0, DOWN, LV1);
+ PIN_IN(gpm0-1, DOWN, LV1);
+ PIN_IN(gpm0-2, DOWN, LV1);
+ PIN_IN(gpm0-3, DOWN, LV1);
+ PIN_IN(gpm0-4, DOWN, LV1);
+ PIN_IN(gpm0-5, DOWN, LV1);
+ PIN_IN(gpm0-6, DOWN, LV1);
+ PIN_IN(gpm0-7, DOWN, LV1);
+
+ PIN_IN(gpm1-0, DOWN, LV1);
+ PIN_IN(gpm1-1, DOWN, LV1);
+ PIN_IN(gpm1-2, DOWN, LV1);
+ PIN_IN(gpm1-3, DOWN, LV1);
+ PIN_IN(gpm1-4, DOWN, LV1);
+ PIN_IN(gpm1-5, DOWN, LV1);
+ PIN_IN(gpm1-6, DOWN, LV1);
+ PIN_IN(gpm2-0, DOWN, LV1);
+ PIN_IN(gpm2-1, DOWN, LV1);
+
+ PIN_IN(gpm3-0, DOWN, LV1);
+ PIN_IN(gpm3-1, DOWN, LV1);
+ PIN_IN(gpm3-2, DOWN, LV1);
+ PIN_IN(gpm3-3, DOWN, LV1);
+ PIN_IN(gpm3-4, DOWN, LV1);
+
+ PIN_IN(gpm4-1, DOWN, LV1);
+ PIN_IN(gpm4-2, DOWN, LV1);
+ PIN_IN(gpm4-3, DOWN, LV1);
+ PIN_IN(gpm4-4, DOWN, LV1);
+ PIN_IN(gpm4-5, DOWN, LV1);
+ PIN_IN(gpm4-6, DOWN, LV1);
+ PIN_IN(gpm4-7, DOWN, LV1);
+ };
sleep1: sleep-state {
PIN_SLP(gpe0-0, PREV, NONE);
--
1.9.1
Powered by blists - more mailing lists