[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <56E61DA9.1030105@samsung.com>
Date: Mon, 14 Mar 2016 11:10:49 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: k.kozlowski@...sung.com, kgene@...nel.org, s.nawrocki@...sung.com,
tomasz.figa@...il.com
Cc: jh80.chung@...sung.com, andi.shyti@...sung.com,
inki.dae@...sung.com, sw0312.kim@...sung.com,
pankaj.dubey@...sung.com, linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH 06/10] ARM: dts: exynos3250-artik5: Add MSHC0 dt node for
eMMC device
Dear all,
It is my mistake. Please ignore only this patch.
This patch is duplicate with patch[1].
[1] [PATCH 06/10] ARM: dts: Add MSHC0 dt node for eMMC device for exynos3250-artik5 module
Best Regards,
Chanwoo Choi
On 2016년 03월 14일 11:04, Chanwoo Choi wrote:
> From: Jaehoon Chung <jh80.chung@...sung.com>
>
> This patch adds MSHC (Mobile Storage Host Controller) dt node for Exynos3250
> SoC. MSHC is an interface between the system and the eMMC device.
>
> Signed-off-by: Jaehoon Chung <jh80.chung@...sung.com>
> Signed-off-by: Andi Shyti <andi.shyti@...sung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
> ---
> arch/arm/boot/dts/exynos3250-artik5.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> index 97d0087efb9f..75b291c10cdc 100644
> --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> @@ -277,6 +277,25 @@
> };
> };
>
> +&mshc_0 {
> + num-slots = <1>;
> + broken-cd;
> + non-removable;
> + cap-mmc-highspeed;
> + desc-num = <4>;
> + card-detect-delay = <200>;
> + vmmc-supply = <&ldo11_reg>;
> + clock-frequency = <100000000>;
> + clock-freq-min-max = <400000 100000000>;
> + samsung,dw-mshc-ciu-div = <1>;
> + samsung,dw-mshc-sdr-timing = <0 1>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
> + bus-width = <8>;
> + status = "okay";
> +};
> +
> &xusbxti {
> clock-frequency = <24000000>;
> };
>
Powered by blists - more mailing lists