| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1458027490-13787-1-git-send-email-cw00.choi@samsung.com> Date: Tue, 15 Mar 2016 16:38:02 +0900 From: Chanwoo Choi <cw00.choi@...sung.com> To: k.kozlowski@...sung.com, kgene@...nel.org, s.nawrocki@...sung.com, tomasz.figa@...il.com Cc: jh80.chung@...sung.com, andi.shyti@...sung.com, inki.dae@...sung.com, sw0312.kim@...sung.com, pankaj.dubey@...sung.com, cw00.choi@...sung.com, linux-samsung-soc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, devicetree@...r.kernel.org Subject: [PATCH v3 0/8] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file This patchset add the support for Device Tree source for Samsung ARTIK5 module[1] based on Exynos3250 SoC and development board[2]. The ARTIK5 module includes the follwoing devices: - Application Processor (Samsung Exynos3250) - WiFi/BT Combo chip - PMIC (Samsung S2MPS14) - eMMC (4GB) - DRAM LPDDR3 (512MB) - Connectors pin (60 Pins x 3 set) Also, this patchset add the ARTIK5 development board[2] dts file which includes the ARTIK5 module[1] and have the devices such as sound codec, sd card port, ethernet port, uart port and so on. [1] https://www.artik.io/hardware/artik-5 [2] http://www.digikey.com/product-detail/en/SIP-KITNXB001/1510-1316-ND/5825102 Changes from v2: (https://lkml.org/lkml/2016/3/14/910) - Add reviewed tag by Krzysztof Kozlowski for all patches - Include the separate patch1[3] in patchset because patch5 depend on patch1[3] [3] https://lkml.org/lkml/2016/3/14/245 - Fix the order issue in exynos3250-artik5.dtsi - Use lowercase for hex address in exynos3250-artik5.dtsi Changes from v1: (https://lkml.org/lkml/2016/3/13/215) - Change the board name from 'artik5-devel' to 'artik5-eval' - Merge the patch6/7/8 to patch5 - Add the new board information to samsung-boards.txt[1] [1] Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt - Fix minor coding style issue and remove 'wakeup' property - Remove 'broken-cd' and 'desc-num' property from mshc_0 node - Handle the LDO11/LDO12 by using XMMC0CDn pin (GPK0-2 gpio) for MMC device and fix the ldo number of 'vmmc-supply' property. - Add the 'vqmmc-supply' property for MSHC2 - Drop the patch10 for PPMU node - Add the new patch to initialize the MMC2 gpio pin on monk board Chanwoo Choi (5): ARM: dts: Add initial pin configuration for exynos3250-rinato clk: samsung: exynos3250: Add MMC2 clock ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk ARM: dts: Add MSHC2 dt node for Exynos3250 SoC ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module Jaehoon Chung (1): ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board Pankaj Dubey (2): clk: samsung: exynos3250: Add UART2 clock ARM: dts: Add UART2 dt node for Exynos3250 SoC .../bindings/arm/samsung/samsung-boards.txt | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos3250-artik5-eval.dts | 43 +++ arch/arm/boot/dts/exynos3250-artik5.dtsi | 334 +++++++++++++++++++++ arch/arm/boot/dts/exynos3250-monk.dts | 12 +- arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 80 +++++ arch/arm/boot/dts/exynos3250-rinato.dts | 71 ++++- arch/arm/boot/dts/exynos3250.dtsi | 25 ++ drivers/clk/samsung/clk-exynos3250.c | 15 + include/dt-bindings/clock/exynos3250.h | 11 +- 10 files changed, 590 insertions(+), 4 deletions(-) create mode 100644 arch/arm/boot/dts/exynos3250-artik5-eval.dts create mode 100644 arch/arm/boot/dts/exynos3250-artik5.dtsi -- 1.9.1
Powered by blists - more mailing lists