[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20160316074050.GS13692@x1>
Date: Wed, 16 Mar 2016 07:40:50 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Laxman Dewangan <ldewangan@...dia.com>
Cc: broonie@...nel.org, lgirdwood@...il.com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH V2] regulator: pwm: Prints error number along with detail
On Mon, 14 Mar 2016, Laxman Dewangan wrote:
> Prints the error number along with error message when any
> error occurs. This help on getting the reason of failure
> quickly from log without any code instrument.
>
> Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
> Cc: Lee Jones <lee.jones@...aro.org>
> ---
> This was part of the series:
> regulator: pwm: Add supports for multiple instance and voltage linear step
> But first 2 patches are already applied of this series, creating patch on top
> of applied patches and resetting the patch count.
>
> - Taken care of the comment for error print like it should be "foo: %d\n"
> style.
> - Added error number on all possible places.
>
> drivers/regulator/pwm-regulator.c | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
Acked-by: Lee Jones <lee.jones@...aro.org>
> diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
> index 4689d62..f99a697 100644
> --- a/drivers/regulator/pwm-regulator.c
> +++ b/drivers/regulator/pwm-regulator.c
> @@ -70,7 +70,7 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
>
> ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
> if (ret) {
> - dev_err(&rdev->dev, "Failed to configure PWM\n");
> + dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
> return ret;
> }
>
> @@ -146,13 +146,13 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
>
> ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period);
> if (ret) {
> - dev_err(&rdev->dev, "Failed to configure PWM\n");
> + dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
> return ret;
> }
>
> ret = pwm_enable(drvdata->pwm);
> if (ret) {
> - dev_err(&rdev->dev, "Failed to enable PWM\n");
> + dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret);
> return ret;
> }
> drvdata->volt_uV = min_uV;
> @@ -200,8 +200,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
>
> if ((length < sizeof(*duty_cycle_table)) ||
> (length % sizeof(*duty_cycle_table))) {
> - dev_err(&pdev->dev,
> - "voltage-table length(%d) is invalid\n",
> + dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
> length);
> return -EINVAL;
> }
> @@ -214,7 +213,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
> (u32 *)duty_cycle_table,
> length / sizeof(u32));
> if (ret) {
> - dev_err(&pdev->dev, "Failed to read voltage-table\n");
> + dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
> return ret;
> }
>
> @@ -277,16 +276,18 @@ static int pwm_regulator_probe(struct platform_device *pdev)
>
> drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
> if (IS_ERR(drvdata->pwm)) {
> - dev_err(&pdev->dev, "Failed to get PWM\n");
> - return PTR_ERR(drvdata->pwm);
> + ret = PTR_ERR(drvdata->pwm);
> + dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret);
> + return ret;
> }
>
> regulator = devm_regulator_register(&pdev->dev,
> &drvdata->desc, &config);
> if (IS_ERR(regulator)) {
> - dev_err(&pdev->dev, "Failed to register regulator %s\n",
> - drvdata->desc.name);
> - return PTR_ERR(regulator);
> + ret = PTR_ERR(regulator);
> + dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
> + drvdata->desc.name, ret);
> + return ret;
> }
>
> return 0;
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists