Fix various issues: Comments about bus errors are incorrect. The PDMA asm must return the size of the memory access that faulted so the transfer count can be adjusted accordingly. A phase change may cause a bus error but should not be treated as failure. A bus error does not always imply a phase change and generally the transfer may continue. Scatter/gather can't be used with PDMA due to overruns (which is a pity because peak throughput seems to double with SG_ALL). Increase default cmd_per_lun to avoid work item startup and shutdown overhead. Signed-off-by: Finn Thain --- Changed since v1: - Set the default cmd_per_lun to 4 based on test results. --- drivers/scsi/NCR5380.h | 2 drivers/scsi/mac_scsi.c | 212 ++++++++++++++++++++++++++---------------------- 2 files changed, 119 insertions(+), 95 deletions(-) Index: linux/drivers/scsi/mac_scsi.c =================================================================== --- linux.orig/drivers/scsi/mac_scsi.c 2016-03-16 14:18:27.000000000 +1100 +++ linux/drivers/scsi/mac_scsi.c 2016-03-16 14:18:38.000000000 +1100 @@ -28,7 +28,8 @@ /* Definitions for the core NCR5380 driver. */ -#define NCR5380_implementation_fields unsigned char *pdma_base +#define NCR5380_implementation_fields unsigned char *pdma_base; \ + int pdma_residual #define NCR5380_read(reg) macscsi_read(instance, reg) #define NCR5380_write(reg, value) macscsi_write(instance, reg, value) @@ -37,7 +38,7 @@ macscsi_dma_xfer_len(instance, cmd) #define NCR5380_dma_recv_setup macscsi_pread #define NCR5380_dma_send_setup macscsi_pwrite -#define NCR5380_dma_residual(instance) (0) +#define NCR5380_dma_residual(instance) (hostdata->pdma_residual) #define NCR5380_intr macscsi_intr #define NCR5380_queue_command macscsi_queue_command @@ -104,18 +105,9 @@ static int __init mac_scsi_setup(char *s __setup("mac5380=", mac_scsi_setup); #endif /* !MODULE */ -/* - Pseudo-DMA: (Ove Edlund) - The code attempts to catch bus errors that occur if one for example - "trips over the cable". - XXX: Since bus errors in the PDMA routines never happen on my - computer, the bus error code is untested. - If the code works as intended, a bus error results in Pseudo-DMA - being disabled, meaning that the driver switches to slow handshake. - If bus errors are NOT extremely rare, this has to be changed. -*/ +/* Pseudo DMA asm originally by Ove Edlund */ -#define CP_IO_TO_MEM(s,d,len) \ +#define CP_IO_TO_MEM(s,d,n) \ __asm__ __volatile__ \ (" cmp.w #4,%2\n" \ " bls 8f\n" \ @@ -152,61 +144,73 @@ __asm__ __volatile__ \ " 9: \n" \ ".section .fixup,\"ax\"\n" \ " .even\n" \ - "90: moveq.l #1, %2\n" \ + "91: moveq.l #1, %2\n" \ + " jra 9b\n" \ + "94: moveq.l #4, %2\n" \ " jra 9b\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ " .align 4\n" \ - " .long 1b,90b\n" \ - " .long 3b,90b\n" \ - " .long 31b,90b\n" \ - " .long 32b,90b\n" \ - " .long 33b,90b\n" \ - " .long 34b,90b\n" \ - " .long 35b,90b\n" \ - " .long 36b,90b\n" \ - " .long 37b,90b\n" \ - " .long 5b,90b\n" \ - " .long 7b,90b\n" \ + " .long 1b,91b\n" \ + " .long 3b,94b\n" \ + " .long 31b,94b\n" \ + " .long 32b,94b\n" \ + " .long 33b,94b\n" \ + " .long 34b,94b\n" \ + " .long 35b,94b\n" \ + " .long 36b,94b\n" \ + " .long 37b,94b\n" \ + " .long 5b,94b\n" \ + " .long 7b,91b\n" \ ".previous" \ - : "=a"(s), "=a"(d), "=d"(len) \ - : "0"(s), "1"(d), "2"(len) \ + : "=a"(s), "=a"(d), "=d"(n) \ + : "0"(s), "1"(d), "2"(n) \ : "d0") static int macscsi_pread(struct Scsi_Host *instance, unsigned char *dst, int len) { struct NCR5380_hostdata *hostdata = shost_priv(instance); - unsigned char *d; - unsigned char *s; - - s = hostdata->pdma_base + (INPUT_DATA_REG << 4); - d = dst; - - /* These conditions are derived from MacOS */ - - while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && - !(NCR5380_read(STATUS_REG) & SR_REQ)) - ; - - if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && - (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) { - pr_err("Error in macscsi_pread\n"); - return -1; - } - - CP_IO_TO_MEM(s, d, len); - - if (len != 0) { - pr_notice("Bus error in macscsi_pread\n"); - return -1; + unsigned char *s = hostdata->pdma_base + (INPUT_DATA_REG << 4); + unsigned char *d = dst; + int n = len; + int transferred; + + while (!NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, + BASR_DRQ | BASR_PHASE_MATCH, + BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) { + CP_IO_TO_MEM(s, d, n); + + transferred = d - dst - n; + hostdata->pdma_residual = len - transferred; + + /* No bus error. */ + if (n == 0) + return 0; + + /* Target changed phase early? */ + if (NCR5380_poll_politely2(instance, STATUS_REG, SR_REQ, SR_REQ, + BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0) + scmd_printk(KERN_ERR, hostdata->connected, + "%s: !REQ and !ACK\n", __func__); + if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) + return 0; + + dsprintk(NDEBUG_PSEUDO_DMA, instance, + "%s: bus error (%d/%d)\n", __func__, transferred, len); + NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance); + d = dst + transferred; + n = len - transferred; } - return 0; + scmd_printk(KERN_ERR, hostdata->connected, + "%s: phase mismatch or !DRQ\n", __func__); + NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance); + return -1; } -#define CP_MEM_TO_IO(s,d,len) \ +#define CP_MEM_TO_IO(s,d,n) \ __asm__ __volatile__ \ (" cmp.w #4,%2\n" \ " bls 8f\n" \ @@ -243,57 +247,76 @@ __asm__ __volatile__ \ " 9: \n" \ ".section .fixup,\"ax\"\n" \ " .even\n" \ - "90: moveq.l #1, %2\n" \ + "91: moveq.l #1, %2\n" \ + " jra 9b\n" \ + "94: moveq.l #4, %2\n" \ " jra 9b\n" \ ".previous\n" \ ".section __ex_table,\"a\"\n" \ " .align 4\n" \ - " .long 1b,90b\n" \ - " .long 3b,90b\n" \ - " .long 31b,90b\n" \ - " .long 32b,90b\n" \ - " .long 33b,90b\n" \ - " .long 34b,90b\n" \ - " .long 35b,90b\n" \ - " .long 36b,90b\n" \ - " .long 37b,90b\n" \ - " .long 5b,90b\n" \ - " .long 7b,90b\n" \ + " .long 1b,91b\n" \ + " .long 3b,94b\n" \ + " .long 31b,94b\n" \ + " .long 32b,94b\n" \ + " .long 33b,94b\n" \ + " .long 34b,94b\n" \ + " .long 35b,94b\n" \ + " .long 36b,94b\n" \ + " .long 37b,94b\n" \ + " .long 5b,94b\n" \ + " .long 7b,91b\n" \ ".previous" \ - : "=a"(s), "=a"(d), "=d"(len) \ - : "0"(s), "1"(d), "2"(len) \ + : "=a"(s), "=a"(d), "=d"(n) \ + : "0"(s), "1"(d), "2"(n) \ : "d0") static int macscsi_pwrite(struct Scsi_Host *instance, unsigned char *src, int len) { struct NCR5380_hostdata *hostdata = shost_priv(instance); - unsigned char *s; - unsigned char *d; - - s = src; - d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4); - - /* These conditions are derived from MacOS */ - - while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && - (!(NCR5380_read(STATUS_REG) & SR_REQ) || - (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))) - ; - - if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) { - pr_err("Error in macscsi_pwrite\n"); - return -1; + unsigned char *s = src; + unsigned char *d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4); + int n = len; + int transferred; + + while (!NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, + BASR_DRQ | BASR_PHASE_MATCH, + BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) { + CP_MEM_TO_IO(s, d, n); + + transferred = s - src - n; + hostdata->pdma_residual = len - transferred; + + /* Target changed phase early? */ + if (NCR5380_poll_politely2(instance, STATUS_REG, SR_REQ, SR_REQ, + BUS_AND_STATUS_REG, BASR_ACK, BASR_ACK, HZ / 64) < 0) + scmd_printk(KERN_ERR, hostdata->connected, + "%s: !REQ and !ACK\n", __func__); + if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) + return 0; + + /* No bus error. */ + if (n == 0) { + if (NCR5380_poll_politely(instance, TARGET_COMMAND_REG, + TCR_LAST_BYTE_SENT, + TCR_LAST_BYTE_SENT, HZ / 64) < 0) + scmd_printk(KERN_ERR, hostdata->connected, + "%s: Last Byte Sent timeout\n", __func__); + return 0; + } + + dsprintk(NDEBUG_PSEUDO_DMA, instance, + "%s: bus error (%d/%d)\n", __func__, transferred, len); + NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance); + s = src + transferred; + n = len - transferred; } - CP_MEM_TO_IO(s, d, len); - - if (len != 0) { - pr_notice("Bus error in macscsi_pwrite\n"); - return -1; - } + scmd_printk(KERN_ERR, hostdata->connected, + "%s: phase mismatch or !DRQ\n", __func__); + NCR5380_dprint(NDEBUG_PSEUDO_DMA, instance); - return 0; + return -1; } static int macscsi_dma_xfer_len(struct Scsi_Host *instance, @@ -301,10 +324,11 @@ static int macscsi_dma_xfer_len(struct S { struct NCR5380_hostdata *hostdata = shost_priv(instance); - if (hostdata->flags & FLAG_NO_PSEUDO_DMA) + if (hostdata->flags & FLAG_NO_PSEUDO_DMA || + cmd->SCp.this_residual < 16) return 0; - return cmd->transfersize; + return cmd->SCp.this_residual; } #include "NCR5380.c" @@ -322,8 +346,8 @@ static struct scsi_host_template mac_scs .eh_bus_reset_handler = macscsi_bus_reset, .can_queue = 16, .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 2, + .sg_tablesize = 1, + .cmd_per_lun = 4, .use_clustering = DISABLE_CLUSTERING, .cmd_size = NCR5380_CMD_SIZE, .max_sectors = 128, @@ -358,8 +382,6 @@ static int __init mac_scsi_probe(struct mac_scsi_template.sg_tablesize = setup_sg_tablesize; if (setup_hostid >= 0) mac_scsi_template.this_id = setup_hostid & 7; - if (setup_use_pdma < 0) - setup_use_pdma = 0; instance = scsi_host_alloc(&mac_scsi_template, sizeof(struct NCR5380_hostdata)); Index: linux/drivers/scsi/NCR5380.h =================================================================== --- linux.orig/drivers/scsi/NCR5380.h 2016-03-16 14:18:33.000000000 +1100 +++ linux/drivers/scsi/NCR5380.h 2016-03-16 14:18:38.000000000 +1100 @@ -292,6 +292,8 @@ static void NCR5380_reselect(struct Scsi static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *); static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data); static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data); +static int NCR5380_poll_politely(struct Scsi_Host *, int, int, int, int); +static int NCR5380_poll_politely2(struct Scsi_Host *, int, int, int, int, int, int, int); #endif /* __KERNEL__ */ #endif /* NCR5380_H */