For those wrapper drivers which only implement Programmed IO, have NCR5380_dma_xfer_len() evaluate to zero. That allows PDMA to be easily disabled at run-time and so the PSEUDO_DMA macro is no longer needed. Also remove the spin counters used for debugging pseudo DMA drivers. Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke --- drivers/scsi/NCR5380.c | 32 +------------------------------- drivers/scsi/NCR5380.h | 4 ---- drivers/scsi/arm/cumana_1.c | 2 -- drivers/scsi/arm/oak.c | 3 +-- drivers/scsi/dmx3191d.c | 4 ++++ drivers/scsi/dtc.c | 7 ------- drivers/scsi/dtc.h | 2 -- drivers/scsi/g_NCR5380.c | 1 - drivers/scsi/g_NCR5380.h | 1 - drivers/scsi/mac_scsi.c | 10 ---------- drivers/scsi/pas16.c | 10 ---------- drivers/scsi/pas16.h | 2 -- drivers/scsi/t128.c | 4 ---- drivers/scsi/t128.h | 2 -- 14 files changed, 6 insertions(+), 78 deletions(-) Index: linux/drivers/scsi/NCR5380.c =================================================================== --- linux.orig/drivers/scsi/NCR5380.c 2016-03-16 14:18:09.000000000 +1100 +++ linux/drivers/scsi/NCR5380.c 2016-03-16 14:18:11.000000000 +1100 @@ -469,34 +469,9 @@ static void prepare_info(struct Scsi_Hos #ifdef PARITY "PARITY " #endif -#ifdef PSEUDO_DMA - "PSEUDO_DMA " -#endif ""); } -#ifdef PSEUDO_DMA -static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance, - char *buffer, int length) -{ - struct NCR5380_hostdata *hostdata = shost_priv(instance); - - hostdata->spin_max_r = 0; - hostdata->spin_max_w = 0; - return 0; -} - -static int __maybe_unused NCR5380_show_info(struct seq_file *m, - struct Scsi_Host *instance) -{ - struct NCR5380_hostdata *hostdata = shost_priv(instance); - - seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n", - hostdata->spin_max_w, hostdata->spin_max_r); - return 0; -} -#endif - /** * NCR5380_init - initialise an NCR5380 * @instance: adapter to configure @@ -1436,7 +1411,6 @@ timeout: return -1; } -#if defined(PSEUDO_DMA) /* * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance, * unsigned char *phase, int *count, unsigned char **data) @@ -1592,7 +1566,6 @@ static int NCR5380_transfer_dma(struct S *phase = NCR5380_read(STATUS_REG) & PHASE_MASK; return foo; } -#endif /* PSEUDO_DMA */ /* * Function : NCR5380_information_transfer (struct Scsi_Host *instance) @@ -1683,7 +1656,6 @@ static void NCR5380_information_transfer * in an unconditional loop. */ -#if defined(PSEUDO_DMA) transfersize = 0; if (!cmd->device->borken) transfersize = NCR5380_dma_xfer_len(instance, cmd, phase); @@ -1706,9 +1678,7 @@ static void NCR5380_information_transfer /* XXX - need to source or sink data here, as appropriate */ } else cmd->SCp.this_residual -= transfersize - len; - } else -#endif /* PSEUDO_DMA */ - { + } else { /* Break up transfer into 3 ms chunks, * presuming 6 accesses per handshake. */ Index: linux/drivers/scsi/NCR5380.h =================================================================== --- linux.orig/drivers/scsi/NCR5380.h 2016-03-16 14:18:09.000000000 +1100 +++ linux/drivers/scsi/NCR5380.h 2016-03-16 14:18:11.000000000 +1100 @@ -257,10 +257,6 @@ struct NCR5380_hostdata { #ifdef SUPPORT_TAGS struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */ #endif -#ifdef PSEUDO_DMA - unsigned spin_max_r; - unsigned spin_max_w; -#endif struct workqueue_struct *work_q; unsigned long accesses_per_ms; /* chip register accesses per ms */ }; Index: linux/drivers/scsi/arm/cumana_1.c =================================================================== --- linux.orig/drivers/scsi/arm/cumana_1.c 2016-03-16 14:18:09.000000000 +1100 +++ linux/drivers/scsi/arm/cumana_1.c 2016-03-16 14:18:11.000000000 +1100 @@ -13,8 +13,6 @@ #include -#define PSEUDO_DMA - #define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata) #define NCR5380_read(reg) cumanascsi_read(instance, reg) #define NCR5380_write(reg, value) cumanascsi_write(instance, reg, value) Index: linux/drivers/scsi/arm/oak.c =================================================================== --- linux.orig/drivers/scsi/arm/oak.c 2016-03-16 14:18:09.000000000 +1100 +++ linux/drivers/scsi/arm/oak.c 2016-03-16 14:18:11.000000000 +1100 @@ -14,7 +14,6 @@ #include -/*#define PSEUDO_DMA*/ #define DONT_USE_INTR #define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata) @@ -24,7 +23,7 @@ #define NCR5380_write(reg, value) \ writeb(value, priv(instance)->base + ((reg) << 2)) -#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize) +#define NCR5380_dma_xfer_len(instance, cmd, phase) (0) #define NCR5380_queue_command oakscsi_queue_command #define NCR5380_info oakscsi_info Index: linux/drivers/scsi/dtc.c =================================================================== --- linux.orig/drivers/scsi/dtc.c 2016-03-16 14:18:09.000000000 +1100 +++ linux/drivers/scsi/dtc.c 2016-03-16 14:18:11.000000000 +1100 @@ -1,4 +1,3 @@ -#define PSEUDO_DMA #define DONT_USE_INTR /* @@ -352,8 +351,6 @@ static inline int NCR5380_pread(struct S while (!(NCR5380_read(DTC_CONTROL_REG) & D_CR_ACCESS)) ++i; rtrc(0); - if (i > hostdata->spin_max_r) - hostdata->spin_max_r = i; return (0); } @@ -400,8 +397,6 @@ static inline int NCR5380_pwrite(struct rtrc(7); /* Check for parity error here. fixme. */ rtrc(0); - if (i > hostdata->spin_max_w) - hostdata->spin_max_w = i; return (0); } @@ -440,8 +435,6 @@ static struct scsi_host_template driver_ .detect = dtc_detect, .release = dtc_release, .proc_name = "dtc3x80", - .show_info = dtc_show_info, - .write_info = dtc_write_info, .info = dtc_info, .queuecommand = dtc_queue_command, .eh_abort_handler = dtc_abort, Index: linux/drivers/scsi/g_NCR5380.c =================================================================== --- linux.orig/drivers/scsi/g_NCR5380.c 2016-03-16 14:18:09.000000000 +1100 +++ linux/drivers/scsi/g_NCR5380.c 2016-03-16 14:18:11.000000000 +1100 @@ -57,7 +57,6 @@ */ #define AUTOPROBE_IRQ -#define PSEUDO_DMA #include #include Index: linux/drivers/scsi/mac_scsi.c =================================================================== --- linux.orig/drivers/scsi/mac_scsi.c 2016-03-16 14:18:03.000000000 +1100 +++ linux/drivers/scsi/mac_scsi.c 2016-03-16 14:18:11.000000000 +1100 @@ -28,8 +28,6 @@ /* Definitions for the core NCR5380 driver. */ -#define PSEUDO_DMA - #define NCR5380_implementation_fields unsigned char *pdma_base #define NCR5380_read(reg) macscsi_read(instance, reg) @@ -46,8 +44,6 @@ #define NCR5380_abort macscsi_abort #define NCR5380_bus_reset macscsi_bus_reset #define NCR5380_info macscsi_info -#define NCR5380_show_info macscsi_show_info -#define NCR5380_write_info macscsi_write_info #include "NCR5380.h" @@ -111,7 +107,6 @@ static int __init mac_scsi_setup(char *s __setup("mac5380=", mac_scsi_setup); #endif /* !MODULE */ -#ifdef PSEUDO_DMA /* Pseudo-DMA: (Ove Edlund) The code attempts to catch bus errors that occur if one for example @@ -303,7 +298,6 @@ static int macscsi_pwrite(struct Scsi_Ho return 0; } -#endif static int macscsi_dma_xfer_len(struct Scsi_Host *instance, struct scsi_cmnd *cmd) @@ -324,8 +318,6 @@ static int macscsi_dma_xfer_len(struct S static struct scsi_host_template mac_scsi_template = { .module = THIS_MODULE, .proc_name = DRV_MODULE_NAME, - .show_info = macscsi_show_info, - .write_info = macscsi_write_info, .name = "Macintosh NCR5380 SCSI", .info = macscsi_info, .queuecommand = macscsi_queue_command, @@ -351,9 +343,7 @@ static int __init mac_scsi_probe(struct if (!pio_mem) return -ENODEV; -#ifdef PSEUDO_DMA pdma_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); -#endif irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); Index: linux/drivers/scsi/pas16.c =================================================================== --- linux.orig/drivers/scsi/pas16.c 2016-03-16 14:18:09.000000000 +1100 +++ linux/drivers/scsi/pas16.c 2016-03-16 14:18:11.000000000 +1100 @@ -1,5 +1,3 @@ -#define PSEUDO_DMA - /* * This driver adapted from Drew Eckhardt's Trantor T128 driver * @@ -479,7 +477,6 @@ static inline int NCR5380_pread (struct P_DATA_REG_OFFSET); register int i = len; int ii = 0; - struct NCR5380_hostdata *hostdata = shost_priv(instance); while ( !(inb(instance->io_port + P_STATUS_REG_OFFSET) & P_ST_RDY) ) ++ii; @@ -492,8 +489,6 @@ static inline int NCR5380_pread (struct instance->host_no); return -1; } - if (ii > hostdata->spin_max_r) - hostdata->spin_max_r = ii; return 0; } @@ -516,7 +511,6 @@ static inline int NCR5380_pwrite (struct register unsigned short reg = (instance->io_port + P_DATA_REG_OFFSET); register int i = len; int ii = 0; - struct NCR5380_hostdata *hostdata = shost_priv(instance); while ( !((inb(instance->io_port + P_STATUS_REG_OFFSET)) & P_ST_RDY) ) ++ii; @@ -529,8 +523,6 @@ static inline int NCR5380_pwrite (struct instance->host_no); return -1; } - if (ii > hostdata->spin_max_w) - hostdata->spin_max_w = ii; return 0; } @@ -550,8 +542,6 @@ static struct scsi_host_template driver_ .detect = pas16_detect, .release = pas16_release, .proc_name = "pas16", - .show_info = pas16_show_info, - .write_info = pas16_write_info, .info = pas16_info, .queuecommand = pas16_queue_command, .eh_abort_handler = pas16_abort, Index: linux/drivers/scsi/t128.c =================================================================== --- linux.orig/drivers/scsi/t128.c 2016-03-16 14:18:09.000000000 +1100 +++ linux/drivers/scsi/t128.c 2016-03-16 14:18:11.000000000 +1100 @@ -1,5 +1,3 @@ -#define PSEUDO_DMA - /* * Trantor T128/T128F/T228 driver * Note : architecturally, the T100 and T130 are different and won't @@ -394,8 +392,6 @@ static struct scsi_host_template driver_ .detect = t128_detect, .release = t128_release, .proc_name = "t128", - .show_info = t128_show_info, - .write_info = t128_write_info, .info = t128_info, .queuecommand = t128_queue_command, .eh_abort_handler = t128_abort, Index: linux/drivers/scsi/dmx3191d.c =================================================================== --- linux.orig/drivers/scsi/dmx3191d.c 2016-03-16 14:18:03.000000000 +1100 +++ linux/drivers/scsi/dmx3191d.c 2016-03-16 14:18:11.000000000 +1100 @@ -39,6 +39,10 @@ #define NCR5380_read(reg) inb(instance->io_port + reg) #define NCR5380_write(reg, value) outb(value, instance->io_port + reg) +#define NCR5380_dma_xfer_len(instance, cmd, phase) (0) +#define NCR5380_pread(instance, dst, len) (0) +#define NCR5380_pwrite(instance, src, len) (0) + #define NCR5380_implementation_fields /* none */ #include "NCR5380.h" Index: linux/drivers/scsi/dtc.h =================================================================== --- linux.orig/drivers/scsi/dtc.h 2016-03-16 14:16:56.000000000 +1100 +++ linux/drivers/scsi/dtc.h 2016-03-16 14:18:11.000000000 +1100 @@ -27,8 +27,6 @@ #define NCR5380_abort dtc_abort #define NCR5380_bus_reset dtc_bus_reset #define NCR5380_info dtc_info -#define NCR5380_show_info dtc_show_info -#define NCR5380_write_info dtc_write_info /* 15 12 11 10 1001 1100 0000 0000 */ Index: linux/drivers/scsi/g_NCR5380.h =================================================================== --- linux.orig/drivers/scsi/g_NCR5380.h 2016-03-16 14:18:03.000000000 +1100 +++ linux/drivers/scsi/g_NCR5380.h 2016-03-16 14:18:11.000000000 +1100 @@ -70,7 +70,6 @@ #define NCR5380_pread generic_NCR5380_pread #define NCR5380_pwrite generic_NCR5380_pwrite #define NCR5380_info generic_NCR5380_info -#define NCR5380_show_info generic_NCR5380_show_info #define BOARD_NCR5380 0 #define BOARD_NCR53C400 1 Index: linux/drivers/scsi/pas16.h =================================================================== --- linux.orig/drivers/scsi/pas16.h 2016-03-16 14:16:56.000000000 +1100 +++ linux/drivers/scsi/pas16.h 2016-03-16 14:18:11.000000000 +1100 @@ -109,8 +109,6 @@ #define NCR5380_abort pas16_abort #define NCR5380_bus_reset pas16_bus_reset #define NCR5380_info pas16_info -#define NCR5380_show_info pas16_show_info -#define NCR5380_write_info pas16_write_info /* 15 14 12 10 7 5 3 1101 0100 1010 1000 */ Index: linux/drivers/scsi/t128.h =================================================================== --- linux.orig/drivers/scsi/t128.h 2016-03-16 14:16:56.000000000 +1100 +++ linux/drivers/scsi/t128.h 2016-03-16 14:18:11.000000000 +1100 @@ -83,8 +83,6 @@ #define NCR5380_abort t128_abort #define NCR5380_bus_reset t128_bus_reset #define NCR5380_info t128_info -#define NCR5380_show_info t128_show_info -#define NCR5380_write_info t128_write_info /* 15 14 12 10 7 5 3 1101 0100 1010 1000 */