lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <abbb0e8ee4eb17c9736c2f3bfeab51ff623b1381.1457111366.git.jpinto@synopsys.com>
Date:	Thu, 17 Mar 2016 12:39:25 +0000
From:	Joao Pinto <Joao.Pinto@...opsys.com>
To:	vinholikatti@...il.com, julian.calaby@...il.com,
	akinobu.mita@...il.com, hch@...radead.org, arnd@...db.de,
	mark.rutland@....com, robh@...nel.org
Cc:	gbroner@...eaurora.org, subhashj@...eaurora.org,
	CARLOS.PALMINHA@...opsys.com, ijc+devicetree@...lion.org.uk,
	linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
	devicetree@...r.kernel.org, Joao Pinto <Joao.Pinto@...opsys.com>
Subject: [RESEND] [PATCH v11 4/6] added support for Synopsys G210 Test Chip

This patch adds support for Synopsys G210 Test Chip.

Signed-off-by: Joao Pinto <jpinto@...opsys.com>
Acked-by: Arnd Bergmann <arnd@...db.de>
---
Changes v10->v11:
- Nothing changed (just to keep up with patch set version).
Changes v0->v10:
- This patch only appeared in v10

 drivers/scsi/ufs/Kconfig       |   4 +
 drivers/scsi/ufs/Makefile      |   1 +
 drivers/scsi/ufs/tc-dwc-g210.c | 315 +++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/tc-dwc-g210.h |  19 +++
 4 files changed, 339 insertions(+)
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.c
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.h

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 647c324..9d218f9 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -86,3 +86,7 @@ config SCSI_UFS_QCOM
 
 config SCSI_UFS_DWC
 	bool
+
+config SCSI_UFS_DWC_TC
+	bool
+	select SCSI_UFS_DWC
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index ccbad53..9468d7b 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,5 +1,6 @@
 # UFSHCD makefile
 obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
+obj-$(CONFIG_SCSI_UFS_DWC_TC) += tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/tc-dwc-g210.c b/drivers/scsi/ufs/tc-dwc-g210.c
new file mode 100644
index 0000000..181f208
--- /dev/null
+++ b/drivers/scsi/ufs/tc-dwc-g210.c
@@ -0,0 +1,315 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "unipro.h"
+
+#include "ufshcd-dwc.h"
+#include "ufshci-dwc.h"
+
+/**
+ * tc_dwc_g210_setup_40bit_rmmi()
+ * This function configures Synopsys TC specific atributes (40-bit RMMI)
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_40bit_rmmi(struct ufs_hba *hba)
+{
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
+		{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
+		{ UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
+		{ UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x14,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
+	};
+
+	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
+						ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * tc_dwc_g210_setup_20bit_rmmi_lane0()
+ * This function configures Synopsys TC 20-bit RMMI Lane 0
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_20bit_rmmi_lane0(struct ufs_hba *hba)
+{
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x12,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 2,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
+	};
+
+	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
+						ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * tc_dwc_g210_setup_20bit_rmmi_lane1()
+ * This function configures Synopsys TC 20-bit RMMI Lane 1
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_20bit_rmmi_lane1(struct ufs_hba *hba)
+{
+	int connected_rx_lanes = 0;
+	int connected_tx_lanes = 0;
+	int ret = 0;
+
+	const struct ufshcd_dme_attr_val setup_tx_attrs[] = {
+		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN1_TX), 0x0d,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN1_TX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN1_TX), 0x12,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+								DME_LOCAL },
+	};
+
+	const struct ufshcd_dme_attr_val setup_rx_attrs[] = {
+		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN1_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN1_RX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN1_RX), 2,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN1_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN1_RX), 0x03,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN1_RX), 0x16,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN1_RX), 0x42,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN1_RX), 0xa4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN1_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN1_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN1_RX), 0x28,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN1_RX), 0x1E,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN1_RX), 0x2f,
+								DME_LOCAL },
+	};
+
+	/* Get the available lane count */
+	ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES),
+			&connected_rx_lanes);
+	ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
+			&connected_tx_lanes);
+
+	if (connected_tx_lanes == 2) {
+
+		ret = ufshcd_dwc_dme_set_attrs(hba, setup_tx_attrs,
+						ARRAY_SIZE(setup_tx_attrs));
+
+		if (ret)
+			goto out;
+	}
+
+	if (connected_rx_lanes == 2) {
+		ret = ufshcd_dwc_dme_set_attrs(hba, setup_rx_attrs,
+						ARRAY_SIZE(setup_rx_attrs));
+	}
+
+out:
+	return ret;
+}
+
+/**
+ * tc_dwc_g210_setup_20bit_rmmi()
+ * This function configures Synopsys TC specific atributes (20-bit RMMI)
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_20bit_rmmi(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
+		{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
+		{ UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
+		{ UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
+	};
+
+	ret = ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
+						ARRAY_SIZE(setup_attrs));
+	if (ret)
+		goto out;
+
+	/* Lane 0 configuration*/
+	ret = tc_dwc_g210_setup_20bit_rmmi_lane0(hba);
+	if (ret)
+		goto out;
+
+	/* Lane 1 configuration*/
+	ret = tc_dwc_g210_setup_20bit_rmmi_lane1(hba);
+	if (ret)
+		goto out;
+
+out:
+	return ret;
+}
+
+/**
+ * tc_dwc_g210_config_40_bit()
+ * This function configures Local (host) Synopsys 40-bit TC specific attributes
+ *
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+int tc_dwc_g210_config_40_bit(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	dev_info(hba->dev, "Configuring Test Chip 40-bit RMMI\n");
+	ret = tc_dwc_g210_setup_40bit_rmmi(hba);
+	if (ret) {
+		dev_err(hba->dev, "Configuration failed\n");
+		goto out;
+	}
+
+	/* To write Shadow register bank to effective configuration block */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
+	if (ret)
+		goto out;
+
+	/* To configure Debug OMC */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(tc_dwc_g210_config_40_bit);
+
+/**
+ * tc_dwc_g210_config_20_bit()
+ * This function configures Local (host) Synopsys 20-bit TC specific attributes
+ *
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+int tc_dwc_g210_config_20_bit(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	dev_info(hba->dev, "Configuring Test Chip 20-bit RMMI\n");
+	ret = tc_dwc_g210_setup_20bit_rmmi(hba);
+	if (ret) {
+		dev_err(hba->dev, "Configuration failed\n");
+		goto out;
+	}
+
+	/* To write Shadow register bank to effective configuration block */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
+	if (ret)
+		goto out;
+
+	/* To configure Debug OMC */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(tc_dwc_g210_config_20_bit);
diff --git a/drivers/scsi/ufs/tc-dwc-g210.h b/drivers/scsi/ufs/tc-dwc-g210.h
new file mode 100644
index 0000000..fb177db
--- /dev/null
+++ b/drivers/scsi/ufs/tc-dwc-g210.h
@@ -0,0 +1,19 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _TC_DWC_G210_H
+#define _TC_DWC_G210_H
+
+int tc_dwc_g210_config_40_bit(struct ufs_hba *hba);
+int tc_dwc_g210_config_20_bit(struct ufs_hba *hba);
+
+#endif /* End of Header */
-- 
1.8.1.5

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ