| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1458181615-27782-7-git-send-email-david@lechnology.com>
Date: Wed, 16 Mar 2016 21:26:39 -0500
From: David Lechner <david@...hnology.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Petr Kulhavy <petr@...ix.com>,
David Lechner <david@...hnology.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
Sekhar Nori <nsekhar@...com>,
Kevin Hilman <khilman@...nel.org>,
Kishon Vijay Abraham I <kishon@...com>,
Alan Stern <stern@...land.harvard.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Bin Liu <b-liu@...com>,
Andreas Färber <afaerber@...e.de>,
Tony Lindgren <tony@...mide.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-usb@...r.kernel.org
Subject: [PATCH v2 06/11] phy: da8xx-usb: new driver for DA8XX SoC USB PHY
This is a new phy driver for the SoC USB controllers on the TI DA8XX
family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
The USB 2.0 PHY also allows overriding the VBUS and ID pins.
Signed-off-by: David Lechner <david@...hnology.com>
---
v2 changes: This is new patch in v2.
drivers/phy/Kconfig | 9 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-da8xx-usb.c | 295 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 305 insertions(+)
create mode 100644 drivers/phy/phy-da8xx-usb.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 26566db..a6060ea 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -35,6 +35,15 @@ config ARMADA375_USBCLUSTER_PHY
depends on OF && HAS_IOMEM
select GENERIC_PHY
+config PHY_DA8XX_USB
+ tristate "TI DA8XX USB PHY Driver"
+ depends on ARCH_DAVINCI_DA8XX
+ select GENERIC_PHY
+ help
+ Enable this to support the USB PHY on DA8XX SoCs.
+
+ This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
config PHY_DM816X_USB
tristate "TI dm816x USB PHY driver"
depends on ARCH_OMAP2PLUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 24596a9..722e01c 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
+obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
new file mode 100644
index 0000000..93a5f4d
--- /dev/null
+++ b/drivers/phy/phy-da8xx-usb.c
@@ -0,0 +1,295 @@
+/*
+ * phy-da8xx-usb - TI DaVinci DA8XX USB PHY driver
+ *
+ * Copyright (C) 2016 David Lechner <david@...hnology.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <linux/usb/otg.h>
+
+/* DA8xx CFGCHIP2 (USB PHY Control) register bits */
+#define PHYCLKGD (1 << 17)
+#define VBUSSENSE (1 << 16)
+#define RESET (1 << 15)
+#define OTGMODE_MASK (3 << 13)
+#define NO_OVERRIDE (0 << 13)
+#define FORCE_HOST (1 << 13)
+#define FORCE_DEVICE (2 << 13)
+#define FORCE_HOST_VBUS_LOW (3 << 13)
+#define USB1PHYCLKMUX (1 << 12)
+#define USB2PHYCLKMUX (1 << 11)
+#define PHYPWRDN (1 << 10)
+#define OTGPWRDN (1 << 9)
+#define DATPOL (1 << 8)
+#define USB1SUSPENDM (1 << 7)
+#define PHY_PLLON (1 << 6)
+#define SESENDEN (1 << 5)
+#define VBDTCTEN (1 << 4)
+#define REFFREQ_MASK (0xf << 0)
+#define REFFREQ_12MHZ (1 << 0)
+#define REFFREQ_24MHZ (2 << 0)
+#define REFFREQ_48MHZ (3 << 0)
+#define REFFREQ_19_2MHZ (4 << 0)
+#define REFFREQ_38_4MHZ (5 << 0)
+#define REFFREQ_13MHZ (6 << 0)
+#define REFFREQ_26MHZ (7 << 0)
+#define REFFREQ_20MHZ (8 << 0)
+#define REFFREQ_40MHZ (9 << 0)
+
+struct da8xx_usbphy {
+ struct phy_provider *phy_provider;
+ struct phy *usb11_phy;
+ struct phy *usb20_phy;
+ struct clk *usb11_clk;
+ struct clk *usb20_clk;
+ void __iomem *phy_ctrl;
+};
+
+static inline u32 da8xx_usbphy_readl(void __iomem *base)
+{
+ return readl(base);
+}
+
+static inline void da8xx_usbphy_writel(void __iomem *base, u32 value)
+{
+ writel(value, base);
+}
+
+static int da8xx_usb11_phy_init(struct phy *phy)
+{
+ struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
+ int ret;
+ u32 val;
+
+ ret = clk_prepare_enable(d_phy->usb11_clk);
+ if (ret)
+ return ret;
+
+ val = da8xx_usbphy_readl(d_phy->phy_ctrl);
+ val |= USB1SUSPENDM;
+ da8xx_usbphy_writel(d_phy->phy_ctrl, val);
+
+ return 0;
+}
+
+static int da8xx_usb11_phy_shutdown(struct phy *phy)
+{
+ struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
+ u32 val;
+
+ val = da8xx_usbphy_readl(d_phy->phy_ctrl);
+ val &= ~USB1SUSPENDM;
+ da8xx_usbphy_writel(d_phy->phy_ctrl, val);
+
+ clk_disable_unprepare(d_phy->usb11_clk);
+
+ return 0;
+}
+
+static const struct phy_ops da8xx_usb11_phy_ops = {
+ .power_on = da8xx_usb11_phy_init,
+ .power_off = da8xx_usb11_phy_shutdown,
+ .owner = THIS_MODULE,
+};
+
+static int da8xx_usb20_phy_init(struct phy *phy)
+{
+ struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
+ int ret;
+ u32 val;
+
+ ret = clk_prepare_enable(d_phy->usb20_clk);
+ if (ret)
+ return ret;
+
+ val = da8xx_usbphy_readl(d_phy->phy_ctrl);
+ val &= ~OTGPWRDN;
+ da8xx_usbphy_writel(d_phy->phy_ctrl, val);
+
+ return 0;
+}
+
+static int da8xx_usb20_phy_shutdown(struct phy *phy)
+{
+ struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
+ u32 val;
+
+ val = da8xx_usbphy_readl(d_phy->phy_ctrl);
+ val |= OTGPWRDN;
+ da8xx_usbphy_writel(d_phy->phy_ctrl, val);
+
+ clk_disable_unprepare(d_phy->usb20_clk);
+
+ return 0;
+}
+
+static const struct phy_ops da8xx_usb20_phy_ops = {
+ .power_on = da8xx_usb20_phy_init,
+ .power_off = da8xx_usb20_phy_shutdown,
+ .owner = THIS_MODULE,
+};
+
+int da8xx_usb20_phy_set_mode(struct phy *phy, enum musb_mode mode)
+{
+ struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
+ u32 val;
+
+ val = da8xx_usbphy_readl(d_phy->phy_ctrl);
+
+ val &= ~OTGMODE_MASK;
+ switch (mode) {
+ case MUSB_HOST: /* Force VBUS valid, ID = 0 */
+ val |= FORCE_HOST;
+ break;
+ case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
+ val |= FORCE_DEVICE;
+ break;
+ case MUSB_OTG: /* Don't override the VBUS/ID comparators */
+ val |= NO_OVERRIDE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ da8xx_usbphy_writel(d_phy->phy_ctrl, val);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(da8xx_usb20_phy_set_mode);
+
+static struct phy *da8xx_usbphy_of_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct da8xx_usbphy *d_phy = dev_get_drvdata(dev);
+
+ if (!d_phy)
+ return ERR_PTR(-ENODEV);
+
+ switch (args->args[0]) {
+ case 1:
+ return d_phy->usb11_phy;
+ case 2:
+ return d_phy->usb20_phy;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+}
+
+static int da8xx_usbphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct da8xx_usbphy *d_phy;
+ struct resource *res;
+
+ d_phy = devm_kzalloc(dev, sizeof(*d_phy), GFP_KERNEL);
+ if (!d_phy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ d_phy->phy_ctrl = devm_ioremap_resource(dev, res);
+ if (IS_ERR(d_phy->phy_ctrl)) {
+ dev_err(dev, "Failed to map resource.\n");
+ return PTR_ERR(d_phy->phy_ctrl);
+ }
+
+ d_phy->usb11_clk = devm_clk_get(dev, "usb11_phy");
+ if (IS_ERR(d_phy->usb11_clk)) {
+ dev_err(dev, "Failed to get usb11_phy clock.\n");
+ return PTR_ERR(d_phy->usb11_clk);
+ }
+
+ d_phy->usb20_clk = devm_clk_get(dev, "usb20_phy");
+ if (IS_ERR(d_phy->usb20_clk)) {
+ dev_err(dev, "Failed to get usb20_phy clock.\n");
+ return PTR_ERR(d_phy->usb20_clk);
+ }
+
+ d_phy->usb11_phy = devm_phy_create(dev, node, &da8xx_usb11_phy_ops);
+ if (IS_ERR(d_phy->usb11_phy)) {
+ dev_err(dev, "Failed to create usb11 phy.\n");
+ return PTR_ERR(d_phy->usb11_phy);
+ }
+
+ d_phy->usb20_phy = devm_phy_create(dev, node, &da8xx_usb20_phy_ops);
+ if (IS_ERR(d_phy->usb20_phy)) {
+ dev_err(dev, "Failed to create usb20 phy.\n");
+ return PTR_ERR(d_phy->usb20_phy);
+ }
+
+ platform_set_drvdata(pdev, d_phy);
+ phy_set_drvdata(d_phy->usb11_phy, d_phy);
+ phy_set_drvdata(d_phy->usb20_phy, d_phy);
+
+ if (node) {
+ d_phy->phy_provider = devm_of_phy_provider_register(dev,
+ da8xx_usbphy_of_xlate);
+ if (IS_ERR(d_phy->phy_provider)) {
+ dev_err(dev, "Failed to create phy provider.\n");
+ return PTR_ERR(d_phy->phy_provider);
+ }
+ } else {
+ int ret;
+
+ ret = phy_create_lookup(d_phy->usb11_phy, "usbphy", "ohci.0");
+ if (ret)
+ dev_warn(dev, "Failed to create usb11 phy lookup .\n");
+ ret = phy_create_lookup(d_phy->usb20_phy, "usbphy", "musb-da8xx");
+ if (ret)
+ dev_warn(dev, "Failed to create usb20 phy lookup .\n");
+ }
+
+ return 0;
+}
+
+static int da8xx_usbphy_remove(struct platform_device *pdev)
+{
+ struct da8xx_usbphy *d_phy = platform_get_drvdata(pdev);
+
+ if (!pdev->dev.of_node) {
+ phy_remove_lookup(d_phy->usb20_phy, "usbphy", "musb-da8xx");
+ phy_remove_lookup(d_phy->usb11_phy, "usbphy", "ohci.0");
+ }
+
+ return 0;
+}
+
+static const struct of_device_id da8xx_usbphy_ids[] = {
+ { .compatible = "ti,da830-usbphy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, da8xx_usbphy_ids);
+
+static struct platform_driver da8xx_usbphy_driver = {
+ .probe = da8xx_usbphy_probe,
+ .remove = da8xx_usbphy_remove,
+ .driver = {
+ .name = "da8xx-usbphy",
+ .of_match_table = da8xx_usbphy_ids,
+ },
+};
+
+module_platform_driver(da8xx_usbphy_driver);
+
+MODULE_ALIAS("platform:da8xx-usbphy");
+MODULE_AUTHOR("David Lechner <david@...hnology.com>");
+MODULE_DESCRIPTION("TI DA8XX USB PHY driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
Powered by blists - more mailing lists