Message-ID: <56EBF447.8070808@nvidia.com>
Date:	Fri, 18 Mar 2016 12:27:51 +0000
From:	Jon Hunter <jonathanh@...dia.com>
To:	Grygorii Strashko <grygorii.strashko@...com>,
	Thomas Gleixner <tglx@...utronix.de>,
	Jason Cooper <jason@...edaemon.net>,
	Marc Zyngier <marc.zyngier@....com>,
	Benoît Cousson <bcousson@...libre.com>,
	Tony Lindgren <tony@...mide.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	"Kumar Gala" <galak@...eaurora.org>,
	Stephen Warren <swarren@...dotorg.org>,
	"Thierry Reding" <thierry.reding@...il.com>
CC:	Kevin Hilman <khilman@...nel.org>,
	Geert Uytterhoeven <geert@...ux-m68k.org>,
	Lars-Peter Clausen <lars@...afoo.de>,
	Linus Walleij <linus.walleij@...aro.org>,
	<linux-tegra@...r.kernel.org>, <linux-omap@...r.kernel.org>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 08/15] genirq: Add runtime power management support for
 IRQ chips


On 18/03/16 11:11, Grygorii Strashko wrote:
> Hi Jon,
> 
> On 03/17/2016 04:19 PM, Jon Hunter wrote:
>> Some IRQ chips may be located in a power domain outside of the CPU
>> subsystem and hence will require device specific runtime power
>> management. In order to support such IRQ chips, add a pointer for a
>> device structure to the irq_chip structure, and if this pointer is
>> populated by the IRQ chip driver and CONFIG_PM is selected in the kernel
>> configuration, then the pm_runtime_get/put APIs for this chip will be
>> called when an IRQ is requested/freed, respectively.
>>
>> When entering system suspend and each interrupt is disabled if there is
>> no wake-up set for that interrupt. For an IRQ chip that utilises runtime
>> power management, print a warning message for each active interrupt that
>> has no wake-up set because these interrupts may be unnecessarily keeping
>> the IRQ chip enabled during system suspend.
>>
>> Signed-off-by: Jon Hunter <jonathanh@...dia.com>
>> ---
>>   include/linux/irq.h    |  5 +++++
>>   kernel/irq/chip.c      | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++
>>   kernel/irq/internals.h |  1 +
>>   kernel/irq/manage.c    | 14 +++++++++++---
>>   kernel/irq/pm.c        |  3 +++
>>   5 files changed, 72 insertions(+), 3 deletions(-)
>>
>> diff --git a/include/linux/irq.h b/include/linux/irq.h
>> index c4de62348ff2..82f36390048d 100644
>> --- a/include/linux/irq.h
>> +++ b/include/linux/irq.h
>> @@ -315,6 +315,7 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
>>   /**
>>    * struct irq_chip - hardware interrupt chip descriptor
>>    *
>> + * @parent:		pointer to associated device
>>    * @name:		name for /proc/interrupts
>>    * @irq_startup:	start up the interrupt (defaults to ->enable if NULL)
>>    * @irq_shutdown:	shut down the interrupt (defaults to ->disable if NULL)
>> @@ -354,6 +355,7 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
>>    * @flags:		chip specific flags
>>    */
> 
> [..]
> 
>>   
>> diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c
>> index cea1de0161f1..ab436119084f 100644
>> --- a/kernel/irq/pm.c
>> +++ b/kernel/irq/pm.c
>> @@ -83,6 +83,9 @@ static bool suspend_device_irq(struct irq_desc *desc)
>>   		 * suspend_device_irqs().
>>   		 */
>>   		return true;
>> +	} else if (!irq_chip_pm_suspended(&desc->irq_data)) {
>> +		pr_warn("irq %d has no wakeup set and has not been freed!\n",
>> +			desc->irq_data.irq);
> 
> Sry. But I did not get this part of the patch :(
> 
> static bool suspend_device_irq(struct irq_desc *desc)
> {
> 	if (!desc->action || irq_desc_is_chained(desc) ||
> 	    desc->no_suspend_depth) {
> 		pr_err("skip irq %d\n", irq_desc_get_irq(desc));
> 		return false;
> 	}
> 
> 	if (irqd_is_wakeup_set(&desc->irq_data)) {
> 		irqd_set(&desc->irq_data, IRQD_WAKEUP_ARMED);
> 		/*
> 		 * We return true here to force the caller to issue
> 		 * synchronize_irq(). We need to make sure that the
> 		 * IRQD_WAKEUP_ARMED is visible before we return from
> 		 * suspend_device_irqs().
> 		 */
> 		pr_err("wakeup irq %d\n", irq_desc_get_irq(desc));
> 		return true;
> 	}
> 
> ^^^^ Here you've added a warning 

Yes, to warn if the IRQ is enabled but not a wake-up source ...

	if (irqd_is_wakeup_set(&desc->irq_data)) {
		...
	} else if (!irq_chip_pm_suspended(&desc->irq_data)) {
		...
	}

> 	desc->istate |= IRQS_SUSPENDED;
> 	__disable_irq(desc);
> 
> ^^^^ Here non wakeup IRQs will be disabled

Yes, but this will not turn off the irqchip. It is legitimate for the
chip to be enabled during suspend if an IRQ is enabled as a wakeup.

The purpose of the warning is to report any IRQs that are enabled at
this point, but NOT wake-up sources. These could be unintentionally be
keeping the chip active when it does not need to be.

> 	pr_err("%s __disable_irq irq %d\n", irq_desc_get_chip(desc)->name, irq_desc_get_irq(desc));
> 
> 	/*
> 	 * Hardware which has no wakeup source configuration facility
> 	 * requires that the non wakeup interrupts are masked at the
> 	 * chip level. The chip implementation indicates that with
> 	 * IRQCHIP_MASK_ON_SUSPEND.
> 	 */
> 	if (irq_desc_get_chip(desc)->flags & IRQCHIP_MASK_ON_SUSPEND) {
> 		mask_irq(desc);
> 		pr_err("%s mask_irq irq %d\n", irq_desc_get_chip(desc)->name, irq_desc_get_irq(desc));
> 	}
> 
> 	return true;
> }
> 
> As result, there should be a ton of warnings if one IRQ (for example in GPIO irqchip)
> is wakeup source, but all other are not. 

No there should not be. Remember this is an else-if and ONLY if an IRQ
is not a wake-up source AND enabled will you get a warning.

> Also I'd like to note that:
> - it is not expected that any IRQs have to be freed on enter Suspend

True, but surely they should have a wake-up enabled then? If not you are
wasting power unnecessarily.

I realise that this is different to how interrupts for irqchips work
today, but when we discussed this before, the only way to ensure that we
can power-down an irqchip with PM is if all IRQs are freed [0]. So it is
a slightly different mindset for irqchips with PM, that may be we
shouldn't hold references to IRQs forever if we are not using them.

> - Primary interrupt controller is expected to be suspended from syscore_suspend()
> - not Primary interrupt controllers may be Suspended from:
>   -- dpm_suspend() or dpm_suspend_late() - usual case for external interrupt controllers
>   GPIO expanders (I2C, SPI ..)
>   -- dpm_suspend_noirq() - usual case for SoC peripherals like OMAP GPIO
> 	dpm_suspend_noirq
> 	|- suspend_device_irqs()
> 	|- device_suspend_noirq() [1] <-- OMAP GPIO do suspend here.
>   -- as always, some arches/maches may require hacks in platform code.
>   
> So, In my opinion, suspend has to be handled by each irqchip driver separately,
> most probably at suspend_noirq level [1], because only  irqchip driver  
> now sees a full picture and knows if it can suspend or not, and when, and how.
> (may require to use pm_runtime_force_suspend/resume()).

I understand what you are saying, but at least in my mind if would be
better if the clients of the IRQ chips using PM freed their interrupts
when entering suspend. Quite possibly I am overlooking a use-case here
or overhead of doing this, but it would avoid every irqchip having to
handle this themselves and having a custom handler.

> I propose do not touch common/generic suspend code now. Any common code can be always
> refactored later once there will be real drivers updated to use irqchip RPM
> and which will support Suspend.

If this is strongly opposed, I would concede to making this a pr_debug()
as I think it could be useful.

Jon

[0] http://marc.info/?l=linux-pm&m=145340595315514&w=2

Powered by blists - more mailing lists