| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAD=FV=XdKWY0QK3AN+Vt_umM2ESZOwqE0SKr4d1JcBPihTjx0g@mail.gmail.com>
Date: Fri, 18 Mar 2016 22:21:25 -0700
From: Doug Anderson <dianders@...omium.org>
To: John Youn <John.Youn@...opsys.com>
Cc: Stefan Wahren <stefan.wahren@...e.com>,
Michael Niewoehner <linux@...ewoehner.de>,
Tao Huang <huangtao@...k-chips.com>,
Julius Werner <jwerner@...omium.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
Caesar Wang <caesar.upstream@...il.com>,
Heiko Stuebner <heiko@...ech.de>,
Felipe Balbi <balbi@...nel.org>,
Remi Pommarel <repk@...plefau.lt>,
Kever Yang <kever.yang@...k-chips.com>
Subject: Re: [RFT PATCH 2/2] Revert "usb: dwc2: Fix probe problem on bcm2835"
Hi,
On Wed, Mar 16, 2016 at 11:28 AM, John Youn <John.Youn@...opsys.com> wrote:
> On 3/10/2016 11:14 AM, John Youn wrote:
>> On 3/9/2016 11:06 AM, Doug Anderson wrote:
>>> Stefan,
>>>
>>> On Wed, Mar 9, 2016 at 11:01 AM, Stefan Wahren <stefan.wahren@...e.com> wrote:
>>>>
>>>>> Doug Anderson <dianders@...omium.org> hat am 7. März 2016 um 22:30
>>>>> geschrieben:
>>>>>
>>>>>
>>>>> Stefan,
>>>>>
>>>>> On Mon, Mar 7, 2016 at 10:40 AM, Stefan Wahren <stefan.wahren@...e.com> wrote:
>>>>>> Hi Doug,
>>>>>>
>>>>>>> Douglas Anderson <dianders@...omium.org> hat am 4. März 2016 um 19:23
>>>>>>> geschrieben:
>>>>>>>
>>>>>>>
>>>>>>> This reverts commit 192cb07f7928 ("usb: dwc2: Fix probe problem on
>>>>>>> bcm2835") now that we've found the root cause. See the change
>>>>>>> titled ("usb: dwc2: Add a 10 ms delay to dwc2_core_reset()").
>>>>>>
>>>>>> adding a delay of 10 ms after a core reset might be a idea, but applying
>>>>>> both
>>>>>> patches breaks USB support on RPi :-(
>>>>>>
>>>>>> I'm getting the wrong register values ...
>>>>>
>>>>> Ugh. :(
>>>>>
>>>>> Just out of curiosity, if you loop and time long it takes for the
>>>>> registers to get to the right state after reset, what do you get?
>>>>> AKA, pick:
>>>>>
>>>>> https://chromium-review.googlesource.com/331260
>>>>>
>>>>> ...and let me know what it prints out.
>>>>
>>>> On my Raspberry Pi B i get the following:
>>>>
>>>> [ 2.084411] dwc2 20980000.usb: mapped PA 20980000 to VA cc880000
>>>> [ 2.084461] dwc2 20980000.usb: cannot get otg clock
>>>> [ 2.084549] dwc2 20980000.usb: registering common handler for irq33
>>>> [ 2.084713] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host
>>>> [ 2.153965] dwc2 20980000.usb: Waited 49996 us, 0x00201000 => 0x01001000,
>>>> 0x00000000 => 0x02002000
>>>> [ 2.174930] dwc2 20980000.usb: Forcing mode to host
>>>>
>>>> So i changed the delay in patch #1 to msleep(50) and then both patches work like
>>>> a charm.
>>>
>>> Great news! :-)
>>>
>>> John: it's pretty clear that there's something taking almost exactly
>>> 10ms on my system and almost exactly 50ms on Stefan's system. Is
>>> there some register we could poll to see when this process is done?
>>> ...or can we look at the dwc2 revision number / feature register and
>>> detect how long to delay?
>>>
>>
>> Hi Doug,
>>
>> I'll have to ask around to see if anyone knows about this. And I'll
>> run some tests on the platforms I have available to me as well.
>>
>
> There's still nothing definitive on our end as to why this is
> happening. Also I don't think there is any other way to poll the
> reset.
One thing I noticed is that the delay was only needed on my OTG port
(not my host-only port). ...I also noticed that while waiting the
HPTXFSIZ was temporarily 0x00000000 while I was delaying. That seems
to match Stephan.
I wonder if perhaps the delay has to do with how long it took to
detect that it needed to go into host mode?
Ah, interesting. It looks as if "GOTGCTL" changes during this time
too. To summarize:
HOST-only (ff540000.usb): needs no delay:
GNPTXFSIZ: 0x04000400
HPTXFSIZ: 0x02000800
GOTGCTL: 0x002d0000
OTG (ff580000): needs 10ms delay. Before delay:
GNPTXFSIZ: 0x00100400
HPTXFSIZ: 0x00000000
GOTGCTL: 0x00010000
After delay:
GNPTXFSIZ: 0x04000400
HPTXFSIZ: 0x02000800
GOTGCTL: 0x002c0000
Could we loop until either BSesVld or ASesVld is set? Don't know much
about OTG, but seems like that might be something sane?
> Our hardware engineers asked for some more information to look
> into it further. Doug, Stefan, Caesar, and anyone else with a related
> platform, do you know the answers to the following:
>
> 1. What is the AHB Clock frequency? Is the AHB Clock gated during
> Reset?
According to commit 20bde643434d ("usb: dwc2: reduce dwc2 driver probe
time"), our AHB clock is 150MHz. I'm nearly certain it is not gated.
> 2. Also is the PHY clock stopped during the reset or is the PHY PLL
> lock times high in the order of ms?
I don't think so.
> 3. In these cases, is the PHY actually an FS Transceiver and not a
> UTMI/ULPI PHY?
I don't think so. Should be answered by debug info spew below...
> 4. Which version of the controller is being used in these cases?
There are two controllers in my case and they behave differently. OTG
takes 10ms and the host-only 0ms.
Here is debug info:
[ 1.752005] dwc2 ff540000.usb: Core Release: 3.10a (snpsid=4f54310a)
[ 1.758350] dwc2 ff540000.usb: hwcfg1=00000000
[ 1.762807] dwc2 ff540000.usb: hwcfg2=228fc856
[ 1.767245] dwc2 ff540000.usb: hwcfg3=03c0c068
[ 1.771693] dwc2 ff540000.usb: hwcfg4=c8004030
[ 1.776149] dwc2 ff540000.usb: grxfsiz=00000400
[ 1.780687] dwc2 ff540000.usb: gnptxfsiz=04000400
[ 1.785402] dwc2 ff540000.usb: hptxfsiz=02000800
[ 1.790024] dwc2 ff540000.usb: Detected values from hardware:
[ 1.795781] dwc2 ff540000.usb: op_mode=6
[ 1.799872] dwc2 ff540000.usb: arch=2
[ 1.817620] dwc2 ff540000.usb: dma_desc_enable=1
[ 1.955925] dwc2 ff540000.usb: power_optimized=1
[ 2.022862] dwc2 ff540000.usb: i2c_enable=0
[ 2.027220] dwc2 ff540000.usb: hs_phy_type=1
[ 2.031657] dwc2 ff540000.usb: fs_phy_type=0
[ 2.036101] dwc2 ff540000.usb: utmi_phy_data_wdith=1
[ 2.041231] dwc2 ff540000.usb: num_dev_ep=2
[ 2.045586] dwc2 ff540000.usb: num_dev_perio_in_ep=0
[ 2.050717] dwc2 ff540000.usb: host_channels=16
[ 2.055420] dwc2 ff540000.usb: max_transfer_size=524287
[ 2.060811] dwc2 ff540000.usb: max_packet_count=1023
[ 2.065946] dwc2 ff540000.usb: nperio_tx_q_depth=0x4
[ 2.071076] dwc2 ff540000.usb: host_perio_tx_q_depth=0x4
[ 2.076556] dwc2 ff540000.usb: dev_token_q_depth=0x8
[ 2.081686] dwc2 ff540000.usb: enable_dynamic_fifo=1
[ 2.086824] dwc2 ff540000.usb: en_multiple_tx_fifo=0
[ 2.099436] dwc2 ff540000.usb: total_fifo_size=960
[ 2.204560] dwc2 ff540000.usb: host_rx_fifo_size=1024
[ 2.209780] dwc2 ff540000.usb: host_nperio_tx_fifo_size=1024
[ 2.712045] dwc2 ff540000.usb: host_perio_tx_fifo_size=512
[ 2.872149] dwc2 ff580000.usb: Core Release: 3.10a (snpsid=4f54310a)
[ 2.872153] dwc2 ff580000.usb: hwcfg1=00006664
[ 2.872156] dwc2 ff580000.usb: hwcfg2=228e2450
[ 2.872158] dwc2 ff580000.usb: hwcfg3=03cc90e8
[ 2.872160] dwc2 ff580000.usb: hwcfg4=dbf04030
[ 2.872163] dwc2 ff580000.usb: grxfsiz=00000400
[ 2.872166] dwc2 ff580000.usb: gnptxfsiz=04000400
[ 2.872168] dwc2 ff580000.usb: hptxfsiz=02000800
[ 2.872171] dwc2 ff580000.usb: Detected values from hardware:
[ 2.872173] dwc2 ff580000.usb: op_mode=0
[ 2.872175] dwc2 ff580000.usb: arch=2
[ 2.872177] dwc2 ff580000.usb: dma_desc_enable=1
[ 2.872179] dwc2 ff580000.usb: power_optimized=1
[ 2.872181] dwc2 ff580000.usb: i2c_enable=0
[ 2.872183] dwc2 ff580000.usb: hs_phy_type=1
[ 2.872186] dwc2 ff580000.usb: fs_phy_type=0
[ 2.872188] dwc2 ff580000.usb: utmi_phy_data_wdith=1
[ 2.872190] dwc2 ff580000.usb: num_dev_ep=9
[ 2.872192] dwc2 ff580000.usb: num_dev_perio_in_ep=0
[ 2.872194] dwc2 ff580000.usb: host_channels=9
[ 2.872196] dwc2 ff580000.usb: max_transfer_size=524287
[ 2.872198] dwc2 ff580000.usb: max_packet_count=1023
[ 2.872201] dwc2 ff580000.usb: nperio_tx_q_depth=0x4
[ 2.872203] dwc2 ff580000.usb: host_perio_tx_q_depth=0x4
[ 2.872205] dwc2 ff580000.usb: dev_token_q_depth=0x8
[ 2.872207] dwc2 ff580000.usb: enable_dynamic_fifo=1
[ 2.872209] dwc2 ff580000.usb: en_multiple_tx_fifo=1
[ 2.872211] dwc2 ff580000.usb: total_fifo_size=972
[ 2.872213] dwc2 ff580000.usb: host_rx_fifo_size=1024
[ 2.872215] dwc2 ff580000.usb: host_nperio_tx_fifo_size=1024
[ 2.872217] dwc2 ff580000.usb: host_perio_tx_fifo_size=512
Powered by blists - more mailing lists