linux-kernel - [PATCH] Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250")

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1458723403-11565-1-git-send-email-yegorslists@googlemail.com>
Date:	Wed, 23 Mar 2016 09:56:43 +0100
From:	yegorslists@...glemail.com
To:	linux-serial@...r.kernel.org
Cc:	gregkh@...uxfoundation.org, peter@...leysoftware.com,
	linux-kernel@...r.kernel.org, bigeasy@...utronix.de,
	Yegor Yefremov <yegorslists@...glemail.com>,
	"Matwey V. Kornilov" <matwey@....msu.ru>
Subject: [PATCH] Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250")

From: Yegor Yefremov <yegorslists@...glemail.com>

When in half-duplex mode RX will be disabled before TX, but not
enabled after deactivating transmitter. This patch enables
UART_IER_RLSI and UART_IER_RDI interrupts after TX is over.

Cc: Matwey V. Kornilov <matwey@....msu.ru>
Signed-off-by: Yegor Yefremov <yegorslists@...glemail.com>
---
 drivers/tty/serial/8250/8250_port.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index e213da0..00ad263 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1403,9 +1403,18 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p)
 	/*
 	 * Empty the RX FIFO, we are not interested in anything
 	 * received during the half-duplex transmission.
+	 * Enable previously disabled RX interrupts.
 	 */
-	if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX))
+	if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
 		serial8250_clear_fifos(p);
+
+		serial8250_rpm_get(p);
+
+		p->ier |= UART_IER_RLSI | UART_IER_RDI;
+		serial_port_out(&p->port, UART_IER, p->ier);
+
+		serial8250_rpm_put(p);
+	}
 }
 
 static void serial8250_em485_handle_stop_tx(unsigned long arg)
-- 
2.1.4