| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <56F36D65.6030504@samsung.com>
Date: Thu, 24 Mar 2016 13:30:29 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: myungjoo.ham@...sung.com, kyungmin.park@...sung.com,
k.kozlowski@...sung.com, kgene@...nel.org, linux.amoon@...il.com,
tjakobi@...h.uni-bielefeld.de
Cc: rjw@...ysocki.net, robh+dt@...nel.org, pawel.moll@....com,
mark.rutland@....com, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, linux@....linux.org.uk,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v5 00/21] PM / devferq: Add generic exynos bus frequency
driver and new passive governor
Dear Anand and Tobias,
To Anand,
First of all, thanks to your test on previous patchset.
I removed the your tested-by tag from this version
because I modified the devfreq core using DEVFREQ_TRANSITION_NOTIFIER notifier.
I think that this patch-set need to test with this patchset.
If you possible, could you please test this patch-set? Thanks in advance.
To Tobias,
I fixed the following issues reported by you. Thanks your test and report.
- RCU locking issue
- debugfs error during kernel booting
Best Regards,
Chanwoo Choi
On 2016년 03월 24일 13:25, Chanwoo Choi wrote:
> Dear all,
>
> This patchset uses the DEVFREQ_TRANSITION_NOTIFIER notifier to connecth
> devfreq device using ondemand governor and devfreq device using passive
> governor. Also I fix the some issue reported by 'Tobias Jakobi' and add the
> detailed issue information. But, this patchset don't modify the anything of
> Device Tree patches (patch12 ~ patch21) which already got the reviewed-by
> from Exynos Soc Maintainer.
>
> I tested it on exynos3250-rinato and exynos4412-odroidu3 board.
>
> [Description]
> This patch-set includes the two features as following. The generic exynos bus
> frequency driver is able to support almost Exynos SoCs for bus frequency
> scaling. And the new passive governor is able to make the dependency on
> between devices for frequency/voltage scaling. I had posted the patch-set[1]
> with the similiar concept. This is is revised version for exynos bus frequency.
> - Generic exynos bus frequency driver
> - New passive governor of DEVFREQ framework
> [1] https://lkml.org/lkml/2015/1/7/872
> : [PATCHv3 0/8] devfreq: Add generic exynos memory-bus frequency driver
>
> Changes from v4:
> (https://lkml.org/lkml/2015/12/14/43)
> - Add new DEVFREQ_TRANSITION_NOTIFIER notifier. The passive
> devfreq device recevie the changed frequency of parent
> devfreq device through DEVFREQ_TRANSITION_NOTIFIER.
> - Add governor type to identify thme using the defined constant
> - Modify the passive governor using the DEVFREQ_TRANSITION_NOTIFIER notifier.
> - Fix the RCU locking probrlm (Reported-by: Tobias Jakobi)
> - Fix the debugfs error during the kernel booting (Reported-by: Tobias Jakobi)
>
> Changes from v3:
> (https://lkml.org/lkml/2015/12/11/75)
> - Add the reviewed-by tag from Krzysztof Kozlowski (patch2/3/13/14/15/16/17)
> - Fix typo of the description on patch14
> - Modify the subject and description of patch17
> - Reorder the 'bus_xxx' device tree node alphabetically in
> both exynos3250-rinato/monk.dts and exynos4412-trats/odroidu3
>
> Changes from v2:
> (https://lkml.org/lkml/2015/12/8/869)
> - Fix typo on documentation
> - Modify the more appropriate sentence on patch description
> - Add the detailed description about both parent and passive bus device
> - Modify the DMC frequency for Exynos4x12 DMC bus (200MHz -> 267MHz)
> - Modify the voltage of 200MHz was included in Exynos3250 DMC bus (800mV -> 825mV)
> - Rename OPP nodes as 'opp@<opp-hz>'
> - Delete the duplicate 'opp-microvolt' property of passive devfreq device
> - Reorder the 'bus_xxx' device tree node alphabetically in exynos3250-rinato/monk.dts
> - Reorder the 'bus_xxx' device tree node alphabetically in exynos4412-trats/odroidu3
> - Add new exynos4412-ppmu-common.dtsi to remove the duplicate PPMU dt node
> on rinato/monk/trats2/odroid-u3 board
> - Add the log message if bus device is registered to devfreq framework successfully
> - Add the reviewed-by tag from Krzysztof Kozlowski
> - Add the tested-by tag from Anand Moon on Odroid U3
> - Add 'SAMSUNG BUS FREQUENCY DRIVER' entry to MAINTAINERS
>
> Changes from v1:
> (https://lkml.org/lkml/2015/11/26/260)
> - Check whether the instance of regulator is NULL or not
> when executing regulator_disable() because of only parent
> devfreq device has the regulator instance. After fixing it,
> the wake-up from suspend state is well working. (patch1)
> - Fix bug which checks 'bus-clk' instead of 'bus->regulator'
> after calling devm_clk_get() (on patch1)
> - Update the documentation to remove the description about
> DEVFREQ-EVENT subsystem (on patch2)
> - Add the full name of DMC (Dynamic Memory Controller) (on patch2)
> - Modify the detailed correlation of buses for Exynos3250
> on documentation (patch2)
> - Add the MFC bus node for Exynos3250 (on patch11, patch12)
> - Fix the duplicate frequency of bus_display on Exynos4x12.dtsi
> - Add the PPMU node for exynos4412-odroidu3
> - Add the support of bus frequency for exynos4412-odroidu3
>
> Detailed descirption for patch-set:
> 1. Add generic exynos bus frequency driver
> : This patch-set adds the generic exynos bus frequency driver for AXI bus
> of sub-blocks in exynos SoC. The Samsung Exynos SoC have the common
> architecture for bus between DRAM and sub-blocks in SoC.
>
> There are the different buses according to Exynos SoC because Exynos SoC
> has the differnt sub-blocks and bus speed. In spite of this difference
> among Exynos SoCs, this driver is able to support almost Exynos SoC by adding
> unique data of each bus in the devicetree file.
>
> In devicetree, each bus node has a bus clock, regulator, operation-point
> and devfreq-event devices which measure the utilization of each bus block.
>
> For example,
> - The bus of DMC block in exynos3250.dtsi are listed below:
>
> bus_dmc: bus_dmc {
> compatible = "samsung,exynos-bus";
> clocks = <&cmu_dmc CLK_DIV_DMC>;
> clock-names = "bus";
> operating-points-v2 = <&bus_dmc_opp_table>;
> status = "disabled";
> };
>
> bus_dmc_opp_table: opp_table1 {
> compatible = "operating-points-v2";
> opp-shared;
>
> opp@...00000 {
> opp-hz = /bits/ 64 <50000000>;
> opp-microvolt = <800000>;
> };
> opp@...000000 {
> opp-hz = /bits/ 64 <100000000>;
> opp-microvolt = <800000>;
> };
> opp@...000000 {
> opp-hz = /bits/ 64 <134000000>;
> opp-microvolt = <800000>;
> };
> opp@...000000 {
> opp-hz = /bits/ 64 <200000000>;
> opp-microvolt = <825000>;
> };
> opp@...000000 {
> opp-hz = /bits/ 64 <400000000>;
> opp-microvolt = <875000>;
> };
> };
>
> - Usage case to handle the frequency and voltage of bus on runtime
> in exynos3250-rinato.dts are listed below:
>
> &bus_dmc {
> devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
> vdd-supply = <&buck1_reg>; /* VDD_MIF */
> status = "okay";
> };
>
> 2. Add new passive governor of DEVFREQ framework (patch5-patch7)
> : This patch-set add the new passive governor for DEVFREQ framework.
> The existing governors (ondemand, performance and so on) are used for DVFS
> (Dynamic Voltage and Frequency Scaling) drivers. The existing governors
> are independently used for specific device driver which don't give the
> influence to other device drviers and also don't receive the effect from
> other device drivers.
>
> The passive governor depends on operation of parent driver with existing
> governors(ondemand, performance and so on) extremely and is not able to
> decide the new frequency by oneself. According to the decided new frequency
> of parent driver with governor, the passive governor uses it to decide
> the appropriate frequency for own device driver. The passive governor
> must need the following information from device tree:
>
> For exameple,
> There are one more bus device drivers in Exynos3250 which need to
> change their source clock according to their utilization on runtime.
> But, they share the same power line (e.g., regulator). So, LEFTBUS bus
> driver is operated as parent with ondemand governor and then the rest
> device driver with passive governor.
>
> The buses of Internal block in exynos3250.dtsi are listed below:
> When LEFTBUS bus driver (parent) changes the bus frequency with
> ondemand governor on runtime, the rest bus devices which sharing
> the same power line (VDD_INT) will change the each bus frequency
> according to the decision of LEFTBUS bus driver (parent).
>
> - INT (Internal) block
> : VDD_INT |--- LEFTBUS
> |--- PERIL
> |--- MFC
> |--- G3D
> |--- RIGHTBUS
> |--- FSYS
> |--- LCD0
> |--- PERIR
> |--- ISP
> |--- CAM
>
> - The buss of INT block in exynos3250.dtsi are listed below:
> bus_leftbus: bus_leftbus {
> compatible = "samsung,exynos-bus";
> clocks = <&cmu CLK_DIV_GDL>;
> clock-names = "bus";
> operating-points-v2 = <&bus_leftbus_opp_table>;
> status = "disabled";
> };
>
> bus_rightbus: bus_rightbus {
> compatible = "samsung,exynos-bus";
> clocks = <&cmu CLK_DIV_GDR>;
> clock-names = "bus";
> operating-points-v2 = <&bus_leftbus_opp_table>;
> status = "disabled";
> };
>
> (Omit the rest bus dt node)
>
> - Usage case to handle the frequency and voltage of bus on runtime
> in exynos3250-rinato.dts are listed below:
> /* Parent bus device of VDD_INT */
> &bus_leftbus {
> devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
> vdd-supply = <&buck3_reg>;
> status = "okay";
> };
>
> /* Passive bus device depend on LEFTBUS bus. */
> &bus_rightbus {
> devfreq = <&bus_leftbus>; /* 'devfreq' property indicates
> the phandle of parent device. */
> status = "okay";
> };
>
> (Omit the rest bus dt node)
>
> Chanwoo Choi (21):
> PM / devfreq: exynos: Add generic exynos bus frequency driver
> PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver
> PM / devfreq: Add devfreq_get_devfreq_by_phandle()
> PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier
> PM / devfreq: Add governer type with unique number
> PM / devfreq: Add new passive governor
> PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor
> PM / devfreq: exynos: Update documentation for bus devices using passive governor
> PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line
> PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver
> MAINTAINERS: Add samsung bus frequency driver entry
> ARM: dts: Add DMC bus node for Exynos3250
> ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk
> ARM: dts: Add bus nodes using VDD_INT for Exynos3250
> ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12
> ARM: dts: Add bus nodes using VDD_INT for Exynos4x12
> ARM: dts: Add bus nodes using VDD_MIF for Exynos4210
> ARM: dts: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes
> ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato
> ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3
> ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3
>
> .../devicetree/bindings/devfreq/exynos-bus.txt | 390 ++++++++
> MAINTAINERS | 9 +
> arch/arm/boot/dts/exynos3250-monk.dts | 47 +-
> arch/arm/boot/dts/exynos3250-rinato.dts | 88 +-
> arch/arm/boot/dts/exynos3250.dtsi | 181 ++++
> arch/arm/boot/dts/exynos4210.dtsi | 159 +++
> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 56 +-
> arch/arm/boot/dts/exynos4412-ppmu-common.dtsi | 50 +
> arch/arm/boot/dts/exynos4412-trats2.dts | 88 +-
> arch/arm/boot/dts/exynos4x12.dtsi | 174 ++++
> drivers/devfreq/Kconfig | 35 +-
> drivers/devfreq/Makefile | 4 +-
> drivers/devfreq/devfreq.c | 224 ++++-
> drivers/devfreq/exynos-bus.c | 561 +++++++++++
> drivers/devfreq/exynos/Makefile | 3 -
> drivers/devfreq/exynos/exynos4_bus.c | 1055 --------------------
> drivers/devfreq/exynos/exynos4_bus.h | 110 --
> drivers/devfreq/exynos/exynos5_bus.c | 431 --------
> drivers/devfreq/exynos/exynos_ppmu.c | 119 ---
> drivers/devfreq/exynos/exynos_ppmu.h | 86 --
> drivers/devfreq/governor.h | 21 +
> drivers/devfreq/governor_passive.c | 192 ++++
> drivers/devfreq/governor_performance.c | 1 +
> drivers/devfreq/governor_powersave.c | 1 +
> drivers/devfreq/governor_simpleondemand.c | 1 +
> drivers/devfreq/governor_userspace.c | 1 +
> include/linux/devfreq.h | 70 ++
> 27 files changed, 2209 insertions(+), 1948 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> create mode 100644 arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
> create mode 100644 drivers/devfreq/exynos-bus.c
> delete mode 100644 drivers/devfreq/exynos/Makefile
> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.c
> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.h
> delete mode 100644 drivers/devfreq/exynos/exynos5_bus.c
> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.c
> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.h
> create mode 100644 drivers/devfreq/governor_passive.c
>
Powered by blists - more mailing lists