Message-Id: <a2f0601b03aad273819e7a8da2a65664759e2889.1457111366.git.jpinto@synopsys.com>
Date:	Thu, 24 Mar 2016 10:19:39 +0000
From:	Joao Pinto <Joao.Pinto@...opsys.com>
To:	martin.petersen@...cle.com
Cc:	CARLOS.PALMINHA@...opsys.com, ijc+devicetree@...lion.org.uk,
	linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
	devicetree@...r.kernel.org, arnd@...db.de, robh@...nel.org,
	Joao Pinto <Joao.Pinto@...opsys.com>
Subject: [RESEND] [PATCH v11 3/6] added support for DesignWare Controller

This patch has the goal to add support for DesignWare UFS Controller
specific operations.

Signed-off-by: Joao Pinto <jpinto@...opsys.com>
Acked-by: Arnd Bergmann <arnd@...db.de>
---
Changes v10->v11:
- Nothing changed (just to keep up with patch set version).
Changes v9->v10 (Arnd Bergmann):
- Patch now only has DWC controller specific code
- Added custom_phy_initialization callback for PHY specific code
Changes v8->v9 (Robert Herring):
- drop 0x in the node declaration
- most specific compatibility string declared first
Changes v7->v8 (Akinobu Mita):
- DME sets were simplified for easier reading
- CLK DIV default values definitions names were changed to match the
 register's name
- New line added to dev_err and dev_info statements
Changes v6->v7 (Arnd Bergmann):
- Changed DT node name (to ufs only) and the memory address (to 0xd000000)
- Removed CONFIG_PM from the PCI glue driver (pm.h already does this)
- No other changes are necessary in ufshcd.c because of the link up notify
 function usage (it is simpler now)
- Removed the PHY mentioning since the Test Chip is not a real PHY for real
 world usage, since it is a test chip for prototyping with a very specific
 usage
- Added again the Test Chip 20-bit option
Changes v5->v6:
- Patch bad format fixed
Changes v4->v5 (Akinobu Mita):
- All functions used only locally in ufshcd-dwc are now declared as static
- ufshcd_dwc_configuration() was removed in ufshcd-dwc and a notify
 function (ufshcd_dwc_link_startup_notify) was created to deal with the
 DWC specific init routines
- 20-bit RMMI option was removed from Kconfig. Now if MPHY TC is selected
 and 40-bit is not then it assumes a 20-bit config
Changes v3->v4 (Arnd Bergmann and Mark Rutland):
- SCSI_UFS_DWC_HOOKS is now silent and selected by the SCSI_UFS_DWC_PLAT
 or SCSI_UFS_DWC_PCI
- Compatibility string has the ufs core version for info purposes since
 the driver is capable of getting the controller version from its 
 registers
- Created ufs-dwc-pci glue driver with specific DWC data
- MPHY configuration remains in the ufshcd-dwc since it is unipro
 attribute writting only not following the a linux phy framework logic
Changes v2->v3 (Julian Calaby):
- Implement a common DWC code to be used by the platform and pci glue
 drivers
- Synopsys ID & Class added to the existing pci driver and specific DWC
 was also added to the pci driver
Changes v1->v2 (Akinobu Mita):
- Implement a platform driver that uses the existing UFS core driver
- Add DWC specific code to the existing UFS core driver

 MAINTAINERS                   |   6 ++
 drivers/scsi/ufs/Kconfig      |   3 +
 drivers/scsi/ufs/Makefile     |   1 +
 drivers/scsi/ufs/ufshcd-dwc.c | 150 ++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd-dwc.h |  26 ++++++++
 drivers/scsi/ufs/ufshcd.h     |   2 +
 drivers/scsi/ufs/ufshci-dwc.h |  42 ++++++++++++
 drivers/scsi/ufs/unipro.h     |  39 +++++++++++
 8 files changed, 269 insertions(+)
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h
 create mode 100644 drivers/scsi/ufs/ufshci-dwc.h

diff --git a/MAINTAINERS b/MAINTAINERS
index d2f94e2..3db3c4c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11006,6 +11006,12 @@ S:	Supported
 F:	Documentation/scsi/ufs.txt
 F:	drivers/scsi/ufs/
 
+UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS
+M:	Joao Pinto <Joao.Pinto@...opsys.com>
+L:	linux-scsi@...r.kernel.org
+S:	Supported
+F:	drivers/scsi/ufs/*dwc*
+
 UNSORTED BLOCK IMAGES (UBI)
 M:	Artem Bityutskiy <dedekind1@...il.com>
 M:	Richard Weinberger <richard@....at>
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 5f45307..647c324 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -83,3 +83,6 @@ config SCSI_UFS_QCOM
 
 	  Select this if you have UFS controller on QCOM chipset.
 	  If unsure, say N.
+
+config SCSI_UFS_DWC
+	bool
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 8303bcc..ccbad53 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,4 +1,5 @@
 # UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/scsi/ufs/ufshcd-dwc.c
new file mode 100644
index 0000000..c1b8a7f
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-dwc.c
@@ -0,0 +1,150 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "unipro.h"
+
+#include "ufshcd-dwc.h"
+#include "ufshci-dwc.h"
+
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+				const struct ufshcd_dme_attr_val *v, int n)
+{
+	int ret = 0;
+	int attr_node = 0;
+
+	for (attr_node = 0; attr_node < n; attr_node++) {
+		ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel,
+			ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(ufshcd_dwc_dme_set_attrs);
+
+/**
+ * ufshcd_dwc_program_clk_div()
+ * This function programs the clk divider value. This value is needed to
+ * provide 1 microsecond tick to unipro layer.
+ * @hba: Private Structure pointer
+ * @divider_val: clock divider value to be programmed
+ *
+ */
+static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
+{
+	ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
+}
+
+/**
+ * ufshcd_dwc_link_is_up()
+ * Check if link is up
+ * @hba: private structure poitner
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
+{
+	int dme_result = 0;
+
+	ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
+
+	if (dme_result == UFSHCD_LINK_IS_UP) {
+		ufshcd_set_link_active(hba);
+		return 0;
+	}
+
+	return 1;
+}
+
+/**
+ * ufshcd_dwc_connection_setup()
+ * This function configures both the local side (host) and the peer side
+ * (device) unipro attributes to establish the connection to application/
+ * cport.
+ * This function is not required if the hardware is properly configured to
+ * have this connection setup on reset. But invoking this function does no
+ * harm and should be fine even working with any ufs device.
+ *
+ * @hba: pointer to drivers private data
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+static int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
+{
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL },
+		{ UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER },
+		{ UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER },
+		{ UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER },
+		{ UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER },
+		{ UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER },
+		{ UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER },
+		{ UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER },
+		{ UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER },
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER }
+	};
+
+	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * ufshcd_dwc_link_startup_notify()
+ * UFS Host DWC specific link startup sequence
+ * @hba: private structure poitner
+ * @status: Callback notify status
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+					enum ufs_notify_change_status status)
+{
+	int err = 0;
+
+	if (status == PRE_CHANGE) {
+		ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125);
+
+		if (hba->vops->custom_phy_initialization) {
+			err = hba->vops->custom_phy_initialization(hba);
+			if (err) {
+				dev_err(hba->dev, "Phy setup failed (%d)\n",
+									err);
+				goto out;
+			}
+		}
+	} else { /* POST_CHANGE */
+		err = ufshcd_dwc_link_is_up(hba);
+		if (err) {
+			dev_err(hba->dev, "Link is not up\n");
+			goto out;
+		}
+
+		err = ufshcd_dwc_connection_setup(hba);
+		if (err)
+			dev_err(hba->dev, "Connection setup failed (%d)\n",
+									err);
+	}
+
+out:
+	return err;
+}
+EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify);
diff --git a/drivers/scsi/ufs/ufshcd-dwc.h b/drivers/scsi/ufs/ufshcd-dwc.h
new file mode 100644
index 0000000..c8be295
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-dwc.h
@@ -0,0 +1,26 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCD_DWC_H
+#define _UFSHCD_DWC_H
+
+struct ufshcd_dme_attr_val {
+	u32 attr_sel;
+	u32 mib_val;
+	u8 peer;
+};
+
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+					enum ufs_notify_change_status status);
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+				const struct ufshcd_dme_attr_val *v, int n);
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 2570d94..8b0cdf0 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -262,6 +262,7 @@ struct ufs_pwr_mode_info {
  * @suspend: called during host controller PM callback
  * @resume: called during host controller PM callback
  * @dbg_register_dump: used to dump controller debug information
+ * @custom_phy_initialization: used to initialize phys in DWC Cores
  */
 struct ufs_hba_variant_ops {
 	const char *name;
@@ -283,6 +284,7 @@ struct ufs_hba_variant_ops {
 	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
 	void	(*dbg_register_dump)(struct ufs_hba *hba);
+	int	(*custom_phy_initialization)(struct ufs_hba *);
 };
 
 /* clock gating state  */
diff --git a/drivers/scsi/ufs/ufshci-dwc.h b/drivers/scsi/ufs/ufshci-dwc.h
new file mode 100644
index 0000000..947a75c
--- /dev/null
+++ b/drivers/scsi/ufs/ufshci-dwc.h
@@ -0,0 +1,42 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCI_DWC_H
+#define _UFSHCI_DWC_H
+
+/* DWC HC UFSHCI specific Registers */
+enum dwc_specific_registers {
+	DWC_UFS_REG_HCLKDIV	= 0xFC,
+};
+
+/* Link Status*/
+enum link_status {
+	UFSHCD_LINK_IS_DOWN	= 1,
+	UFSHCD_LINK_IS_UP	= 2,
+};
+
+/* Clock Divider Values: Hex equivalent of frequency in MHz */
+enum clk_div_values {
+	DWC_UFS_REG_HCLKDIV_DIV_62_5	= 0x3e,
+	DWC_UFS_REG_HCLKDIV_DIV_125	= 0x7d,
+	DWC_UFS_REG_HCLKDIV_DIV_200	= 0xc8,
+};
+
+/* Selector Index */
+enum selector_index {
+	SELIND_LN0_TX		= 0x00,
+	SELIND_LN1_TX		= 0x01,
+	SELIND_LN0_RX		= 0x04,
+	SELIND_LN1_RX		= 0x05,
+};
+
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index 816a8a4..da16254 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -35,6 +35,10 @@
 #define TX_LCC_SEQUENCER			0x0032
 #define TX_MIN_ACTIVATETIME			0x0033
 #define TX_PWM_G6_G7_SYNC_LENGTH		0x0034
+#define TX_REFCLKFREQ				0x00EB
+#define TX_CFGCLKFREQVAL			0x00EC
+#define	CFGEXTRATTR				0x00F0
+#define DITHERCTRL2				0x00F1
 
 /*
  * M-RX Configuration Attributes
@@ -48,8 +52,38 @@
 #define RX_ENTER_HIBERN8			0x00A7
 #define RX_BYPASS_8B10B_ENABLE			0x00A8
 #define RX_TERMINATION_FORCE_ENABLE		0x0089
+#define RX_REFCLKFREQ				0x00EB
+#define	RX_CFGCLKFREQVAL			0x00EC
+#define CFGWIDEINLN				0x00F0
+#define CFGRXCDR8				0x00BA
+#define ENARXDIRECTCFG4				0x00F2
+#define CFGRXOVR8				0x00BD
+#define RXDIRECTCTRL2				0x00C7
+#define ENARXDIRECTCFG3				0x00F3
+#define RXCALCTRL				0x00B4
+#define ENARXDIRECTCFG2				0x00F4
+#define CFGRXOVR4				0x00E9
+#define RXSQCTRL				0x00B5
+#define CFGRXOVR6				0x00BF
 
 #define is_mphy_tx_attr(attr)			(attr < RX_MODE)
+
+/*
+ * Common Block Attributes
+ */
+#define TX_GLOBALHIBERNATE			UNIPRO_CB_OFFSET(0x002B)
+#define REFCLKMODE				UNIPRO_CB_OFFSET(0x00BF)
+#define DIRECTCTRL19				UNIPRO_CB_OFFSET(0x00CD)
+#define DIRECTCTRL10				UNIPRO_CB_OFFSET(0x00E6)
+#define CDIRECTCTRL6				UNIPRO_CB_OFFSET(0x00EA)
+#define RTOBSERVESELECT				UNIPRO_CB_OFFSET(0x00F0)
+#define CBDIVFACTOR				UNIPRO_CB_OFFSET(0x00F1)
+#define CBDCOCTRL5				UNIPRO_CB_OFFSET(0x00F3)
+#define CBPRGPLL2				UNIPRO_CB_OFFSET(0x00F8)
+#define CBPRGTUNING				UNIPRO_CB_OFFSET(0x00FB)
+
+#define UNIPRO_CB_OFFSET(x)			(0x8000 | x)
+
 /*
  * PHY Adpater attributes
  */
@@ -110,6 +144,11 @@
 #define PA_STALLNOCONFIGTIME	0x15A3
 #define PA_SAVECONFIGTIME	0x15A4
 
+/*Other attributes*/
+#define VS_MPHYCFGUPDT		0xD085
+#define VS_DEBUGOMC		0xD09E
+#define VS_POWERSTATE		0xD083
+
 /* PA power modes */
 enum {
 	FAST_MODE	= 1,
-- 
1.8.1.5

Powered by blists - more mailing lists