[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1458816106-11596-3-git-send-email-enric.balletbo@collabora.com>
Date: Thu, 24 Mar 2016 11:41:45 +0100
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, devel@...verdev.osuosl.org,
treding@...dia.com, robh+dt@...nel.org
Cc: pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
airlied@...ux.ie, gregkh@...uxfoundation.org,
sjoerd.simons@...labora.co.uk, javier@...hile0.org,
span@...logixsemi.com, nathan.chung@...iatek.com,
djkurtz@...omium.org, drinkcat@...omium.org,
laurent.pinchart@...asonboard.com, dan.carpenter@...cle.com,
jb.tsai@...iatek.com, cawa.cheng@...iatek.com,
eddie.huang@...iatek.com, cjiao@...logixsemi.com,
emil.l.velikov@...il.com
Subject: [PATCH 2/3] devicetree: Add ANX7814 bridge binding.
The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
---
.../devicetree/bindings/video/bridge/anx7814.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt
diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
new file mode 100644
index 0000000..5a47a42
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
@@ -0,0 +1,41 @@
+Analogix ANX7814 SlimPort (Full-HD Transmitter)
+-----------------------------------------------
+
+The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
+designed for portable devices.
+
+Required properties:
+
+ - compatible : "analogix,anx7814"
+ - reg : I2C address of the device
+ - interrupt-parent : Should be the phandle of the interrupt controller
+ that services interrupts for this device
+ - interrupts : Should contain the INTP interrupt
+ - cable-det-gpios : Which GPIO to use for cable detection
+ - pd-gpios : Which GPIO to use for power down
+ - reset-gpios : Which GPIO to use for reset
+
+Optional properties:
+
+ - v10-gpios : Which GPIO to use for V10 control.
+ - Video port for HDMI output, using the DT bindings defined in [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ anx7814: anx7814@38 {
+ compatible = "analogix,anx7814";
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
+ cable-det-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+ pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+ v10-gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
+ port {
+ anx7814_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
--
2.1.0
Powered by blists - more mailing lists