linux-kernel - Re: [PATCH] usb: dwc2: do not override forced dr

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 24 Mar 2016 14:21:37 -0700
From:	John Youn <John.Youn@...opsys.com>
To:	Przemek Rudy <prudy1@...pl>,
	"John.Youn@...opsys.com" <John.Youn@...opsys.com>
CC:	"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
	"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] usb: dwc2: do not override forced dr_mode in gadget setup

On 3/16/2016 3:10 PM, Przemek Rudy wrote:
> The host/device mode set with dr_mode should be kept all the time,
> not being changed to OTG in gadget setup (by overriding CFGUSB_FORCEDEVMODE
> and CFGUSB_FORCEHOSTMODE bits).
> 
> Signed-off-by: Przemek Rudy <prudy1@...pl>
> ---
>  drivers/usb/dwc2/gadget.c | 23 ++++++++++++++++++-----
>  1 file changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index e9940dd..818f158 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -2254,6 +2254,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
>  {
>  	u32 intmsk;
>  	u32 val;
> +	u32 usbcfg;
>  
>  	/* Kill any ep0 requests as controller will be reinitialized */
>  	kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET);
> @@ -2267,10 +2268,16 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
>  	 * set configuration.
>  	 */
>  
> +	/* keep other bits untouched (so e.g. forced modes are not lost) */
> +	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
> +	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
> +		GUSBCFG_HNPCAP);
> +
>  	/* set the PLL on, remove the HNP/SRP and set the PHY */
>  	val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
> -	dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> -	       (val << GUSBCFG_USBTRDTIM_SHIFT), hsotg->regs + GUSBCFG);
> +	usbcfg |= hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> +		(val << GUSBCFG_USBTRDTIM_SHIFT);
> +	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
>  
>  	dwc2_hsotg_init_fifo(hsotg);
>  
> @@ -3031,6 +3038,7 @@ static struct usb_ep_ops dwc2_hsotg_ep_ops = {
>  static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
>  {
>  	u32 trdtim;
> +	u32 usbcfg;
>  	/* unmask subset of endpoint interrupts */
>  
>  	dwc2_writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
> @@ -3054,11 +3062,16 @@ static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
>  
>  	dwc2_hsotg_init_fifo(hsotg);
>  
> +	/* keep other bits untouched (so e.g. forced modes are not lost) */
> +	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
> +	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
> +		GUSBCFG_HNPCAP);
> +
>  	/* set the PLL on, remove the HNP/SRP and set the PHY */
>  	trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
> -	dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> -		(trdtim << GUSBCFG_USBTRDTIM_SHIFT),
> -		hsotg->regs + GUSBCFG);
> +	usbcfg |= hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> +		(trdtim << GUSBCFG_USBTRDTIM_SHIFT);
> +	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
>  
>  	if (using_dma(hsotg))
>  		__orr32(hsotg->regs + GAHBCFG, GAHBCFG_DMA_EN);
> 


Acked-by: John Youn <johnyoun@...opsys.com>
Tested-by: John Youn <johnyoun@...opsys.com>

Regards,
John