[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAJAp7Og+w1OixdtctUjezrSTy02a0xm9HUnhpSXpRaF4d5unaQ@mail.gmail.com>
Date: Mon, 28 Mar 2016 21:39:21 -0700
From: Bjorn Andersson <bjorn@...o.se>
To: Eugene Krasnikov <k.eugene.e@...il.com>
Cc: Kalle Valo <kvalo@...eaurora.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Mark Rutland <mark.rutland@....com>,
Pawel Moll <pawel.moll@....com>,
Rob Herring <robh+dt@...nel.org>, yfw <fengwei.yin@...aro.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
linux-wireless <linux-wireless@...r.kernel.org>,
netdev <netdev@...r.kernel.org>,
wcn36xx <wcn36xx@...ts.infradead.org>
Subject: Re: [PATCH 3/4] wcn36xx: Transition driver to SMD client
On Mon, Jan 11, 2016 at 1:02 AM, Eugene Krasnikov <k.eugene.e@...il.com> wrote:
> Better late than never! Looks good to me.
>
Unfortunately I ran into an issue with ordering of operations between
the WiFi driver and the wcnss_ctrl driver. So an updated series is on
the way, but this depends on changes to the wcnss_ctrl driver, which
are being reviewed right now.
Regards,
Bjorn
> 2015-12-28 1:34 GMT+00:00 Bjorn Andersson <bjorn@...o.se>:
>> The wcn36xx wifi driver follows the life cycle of the WLAN_CTRL SMD
>> channel, as such it should be a SMD client. This patch makes this
>> transition, now that we have the necessary frameworks available.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@...ymobile.com>
>> ---
>> drivers/net/wireless/ath/wcn36xx/Kconfig | 2 +-
>> drivers/net/wireless/ath/wcn36xx/dxe.c | 16 +++--
>> drivers/net/wireless/ath/wcn36xx/main.c | 111 +++++++++++++++++------------
>> drivers/net/wireless/ath/wcn36xx/smd.c | 26 ++++---
>> drivers/net/wireless/ath/wcn36xx/smd.h | 4 ++
>> drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 21 ++----
>> 6 files changed, 99 insertions(+), 81 deletions(-)
>>
>> diff --git a/drivers/net/wireless/ath/wcn36xx/Kconfig b/drivers/net/wireless/ath/wcn36xx/Kconfig
>> index 591ebaea8265..394fe5b77c90 100644
>> --- a/drivers/net/wireless/ath/wcn36xx/Kconfig
>> +++ b/drivers/net/wireless/ath/wcn36xx/Kconfig
>> @@ -1,6 +1,6 @@
>> config WCN36XX
>> tristate "Qualcomm Atheros WCN3660/3680 support"
>> - depends on MAC80211 && HAS_DMA
>> + depends on MAC80211 && HAS_DMA && QCOM_SMD
>> ---help---
>> This module adds support for wireless adapters based on
>> Qualcomm Atheros WCN3660 and WCN3680 mobile chipsets.
>> diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
>> index f8dfa05b290a..47f3937a7ab9 100644
>> --- a/drivers/net/wireless/ath/wcn36xx/dxe.c
>> +++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
>> @@ -23,6 +23,7 @@
>> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>>
>> #include <linux/interrupt.h>
>> +#include <linux/soc/qcom/smem_state.h>
>> #include "wcn36xx.h"
>> #include "txrx.h"
>>
>> @@ -150,9 +151,12 @@ int wcn36xx_dxe_alloc_ctl_blks(struct wcn36xx *wcn)
>> goto out_err;
>>
>> /* Initialize SMSM state Clear TX Enable RING EMPTY STATE */
>> - ret = wcn->ctrl_ops->smsm_change_state(
>> - WCN36XX_SMSM_WLAN_TX_ENABLE,
>> - WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY);
>> + ret = qcom_smem_state_update_bits(wcn->tx_enable_state,
>> + WCN36XX_SMSM_WLAN_TX_ENABLE |
>> + WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY,
>> + WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY);
>> + if (ret)
>> + goto out_err;
>>
>> return 0;
>>
>> @@ -676,9 +680,9 @@ int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn,
>> * notify chip about new frame through SMSM bus.
>> */
>> if (is_low && vif_priv->pw_state == WCN36XX_BMPS) {
>> - wcn->ctrl_ops->smsm_change_state(
>> - 0,
>> - WCN36XX_SMSM_WLAN_TX_ENABLE);
>> + qcom_smem_state_update_bits(wcn->tx_rings_empty_state,
>> + WCN36XX_SMSM_WLAN_TX_ENABLE,
>> + WCN36XX_SMSM_WLAN_TX_ENABLE);
>> } else {
>> /* indicate End Of Packet and generate interrupt on descriptor
>> * done.
>> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
>> index 7c169abdbafe..8659e3f997d2 100644
>> --- a/drivers/net/wireless/ath/wcn36xx/main.c
>> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
>> @@ -19,6 +19,9 @@
>> #include <linux/module.h>
>> #include <linux/firmware.h>
>> #include <linux/platform_device.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/soc/qcom/smd.h>
>> +#include <linux/soc/qcom/smem_state.h>
>> #include "wcn36xx.h"
>>
>> unsigned int wcn36xx_dbg_mask;
>> @@ -981,48 +984,63 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
>> }
>>
>> static int wcn36xx_platform_get_resources(struct wcn36xx *wcn,
>> - struct platform_device *pdev)
>> + struct device *dev)
>> {
>> - struct resource *res;
>> + u32 mmio[2];
>> + int ret;
>> +
>> /* Set TX IRQ */
>> - res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
>> - "wcnss_wlantx_irq");
>> - if (!res) {
>> + wcn->tx_irq = irq_of_parse_and_map(dev->of_node, 0);
>> + if (!wcn->tx_irq) {
>> wcn36xx_err("failed to get tx_irq\n");
>> return -ENOENT;
>> }
>> - wcn->tx_irq = res->start;
>>
>> /* Set RX IRQ */
>> - res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
>> - "wcnss_wlanrx_irq");
>> - if (!res) {
>> + wcn->rx_irq = irq_of_parse_and_map(dev->of_node, 1);
>> + if (!wcn->rx_irq) {
>> wcn36xx_err("failed to get rx_irq\n");
>> return -ENOENT;
>> }
>> - wcn->rx_irq = res->start;
>> +
>> + /* Acquire SMSM tx enable handle */
>> + wcn->tx_enable_state = qcom_smem_state_get(dev, "tx-enable",
>> + &wcn->tx_enable_state_bit);
>> + if (IS_ERR(wcn->tx_enable_state)) {
>> + wcn36xx_err("failed to get tx-enable state\n");
>> + return -ENOENT;
>> + }
>> +
>> + /* Acquire SMSM tx rings empty handle */
>> + wcn->tx_rings_empty_state = qcom_smem_state_get(dev, "tx-rings-empty",
>> + &wcn->tx_rings_empty_state_bit);
>> + if (IS_ERR(wcn->tx_rings_empty_state)) {
>> + wcn36xx_err("failed to get tx-rings-empty state\n");
>> + return -ENOENT;
>> + }
>>
>> /* Map the memory */
>> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> - "wcnss_mmio");
>> - if (!res) {
>> - wcn36xx_err("failed to get mmio\n");
>> + ret = of_property_read_u32_array(dev->of_node, "qcom,wcnss-mmio", mmio, 2);
>> + if (ret) {
>> + wcn36xx_err("failed to get qcom,wcnss-mmio\n");
>> return -ENOENT;
>> }
>> - wcn->mmio = ioremap(res->start, resource_size(res));
>> +
>> + wcn->mmio = ioremap(mmio[0], mmio[1]);
>> if (!wcn->mmio) {
>> wcn36xx_err("failed to map io memory\n");
>> return -ENOMEM;
>> }
>> +
>> return 0;
>> }
>>
>> -static int wcn36xx_probe(struct platform_device *pdev)
>> +static int wcn36xx_probe(struct qcom_smd_device *sdev)
>> {
>> struct ieee80211_hw *hw;
>> struct wcn36xx *wcn;
>> int ret;
>> - u8 addr[ETH_ALEN];
>> + const u8 *addr;
>>
>> wcn36xx_dbg(WCN36XX_DBG_MAC, "platform probe\n");
>>
>> @@ -1032,20 +1050,27 @@ static int wcn36xx_probe(struct platform_device *pdev)
>> ret = -ENOMEM;
>> goto out_err;
>> }
>> - platform_set_drvdata(pdev, hw);
>> + dev_set_drvdata(&sdev->dev, hw);
>> wcn = hw->priv;
>> wcn->hw = hw;
>> - wcn->dev = &pdev->dev;
>> - wcn->ctrl_ops = pdev->dev.platform_data;
>> + wcn->dev = &sdev->dev;
>> + wcn->smd_channel = sdev->channel;
>>
>> mutex_init(&wcn->hal_mutex);
>>
>> - if (!wcn->ctrl_ops->get_hw_mac(addr)) {
>> + sdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
>> +
>> + addr = of_get_property(sdev->dev.of_node, "local-mac-address", &ret);
>> + if (addr && ret != ETH_ALEN) {
>> + wcn36xx_err("invalid local-mac-address\n");
>> + ret = -EINVAL;
>> + goto out_err;
>> + } else if (addr) {
>> wcn36xx_info("mac address: %pM\n", addr);
>> SET_IEEE80211_PERM_ADDR(wcn->hw, addr);
>> }
>>
>> - ret = wcn36xx_platform_get_resources(wcn, pdev);
>> + ret = wcn36xx_platform_get_resources(wcn, &sdev->dev);
>> if (ret)
>> goto out_wq;
>>
>> @@ -1063,9 +1088,10 @@ out_wq:
>> out_err:
>> return ret;
>> }
>> -static int wcn36xx_remove(struct platform_device *pdev)
>> +
>> +static void wcn36xx_remove(struct qcom_smd_device *sdev)
>> {
>> - struct ieee80211_hw *hw = platform_get_drvdata(pdev);
>> + struct ieee80211_hw *hw = dev_get_drvdata(&sdev->dev);
>> struct wcn36xx *wcn = hw->priv;
>> wcn36xx_dbg(WCN36XX_DBG_MAC, "platform remove\n");
>>
>> @@ -1073,41 +1099,34 @@ static int wcn36xx_remove(struct platform_device *pdev)
>> mutex_destroy(&wcn->hal_mutex);
>>
>> ieee80211_unregister_hw(hw);
>> +
>> + qcom_smem_state_put(wcn->tx_enable_state);
>> + qcom_smem_state_put(wcn->tx_rings_empty_state);
>> +
>> iounmap(wcn->mmio);
>> ieee80211_free_hw(hw);
>> -
>> - return 0;
>> }
>> -static const struct platform_device_id wcn36xx_platform_id_table[] = {
>> - {
>> - .name = "wcn36xx",
>> - .driver_data = 0
>> - },
>> +
>> +static const struct of_device_id wcn36xx_of_match[] = {
>> + { .compatible = "qcom,wcn3620-wlan" },
>> + { .compatible = "qcom,wcn3660-wlan" },
>> + { .compatible = "qcom,wcn3680-wlan" },
>> {}
>> };
>> -MODULE_DEVICE_TABLE(platform, wcn36xx_platform_id_table);
>> +MODULE_DEVICE_TABLE(of, wcn36xx_of_match);
>>
>> -static struct platform_driver wcn36xx_driver = {
>> +static struct qcom_smd_driver wcn36xx_driver = {
>> .probe = wcn36xx_probe,
>> .remove = wcn36xx_remove,
>> + .callback = wcn36xx_smd_rsp_process,
>> .driver = {
>> .name = "wcn36xx",
>> + .of_match_table = wcn36xx_of_match,
>> + .owner = THIS_MODULE,
>> },
>> - .id_table = wcn36xx_platform_id_table,
>> };
>>
>> -static int __init wcn36xx_init(void)
>> -{
>> - platform_driver_register(&wcn36xx_driver);
>> - return 0;
>> -}
>> -module_init(wcn36xx_init);
>> -
>> -static void __exit wcn36xx_exit(void)
>> -{
>> - platform_driver_unregister(&wcn36xx_driver);
>> -}
>> -module_exit(wcn36xx_exit);
>> +module_qcom_smd_driver(wcn36xx_driver);
>>
>> MODULE_LICENSE("Dual BSD/GPL");
>> MODULE_AUTHOR("Eugene Krasnikov k.eugene.e@...il.com");
>> diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
>> index 4307429740a9..2bf42787a4af 100644
>> --- a/drivers/net/wireless/ath/wcn36xx/smd.c
>> +++ b/drivers/net/wireless/ath/wcn36xx/smd.c
>> @@ -19,6 +19,7 @@
>> #include <linux/etherdevice.h>
>> #include <linux/firmware.h>
>> #include <linux/bitops.h>
>> +#include <linux/soc/qcom/smd.h>
>> #include "smd.h"
>>
>> struct wcn36xx_cfg_val {
>> @@ -253,7 +254,7 @@ static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len)
>>
>> init_completion(&wcn->hal_rsp_compl);
>> start = jiffies;
>> - ret = wcn->ctrl_ops->tx(wcn->hal_buf, len);
>> + ret = qcom_smd_send(wcn->smd_channel, wcn->hal_buf, len);
>> if (ret) {
>> wcn36xx_err("HAL TX failed\n");
>> goto out;
>> @@ -2100,9 +2101,13 @@ out:
>> mutex_unlock(&wcn->hal_mutex);
>> return ret;
>> }
>> -static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
>> +
>> +int wcn36xx_smd_rsp_process(struct qcom_smd_device *sdev,
>> + const void *buf, size_t len)
>> {
>> - struct wcn36xx_hal_msg_header *msg_header = buf;
>> + const struct wcn36xx_hal_msg_header *msg_header = buf;
>> + struct ieee80211_hw *hw = dev_get_drvdata(&sdev->dev);
>> + struct wcn36xx *wcn = hw->priv;
>> struct wcn36xx_hal_ind_msg *msg_ind;
>> wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "SMD <<< ", buf, len);
>>
>> @@ -2151,7 +2156,7 @@ static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
>> case WCN36XX_HAL_OTA_TX_COMPL_IND:
>> case WCN36XX_HAL_MISSED_BEACON_IND:
>> case WCN36XX_HAL_DELETE_STA_CONTEXT_IND:
>> - msg_ind = kmalloc(sizeof(*msg_ind) + len, GFP_KERNEL);
>> + msg_ind = kmalloc(sizeof(*msg_ind) + len, GFP_ATOMIC);
>> if (!msg_ind) {
>> /*
>> * FIXME: Do something smarter then just
>> @@ -2175,6 +2180,8 @@ static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
>> wcn36xx_err("SMD_EVENT (%d) not supported\n",
>> msg_header->msg_type);
>> }
>> +
>> + return 0;
>> }
>> static void wcn36xx_ind_smd_work(struct work_struct *work)
>> {
>> @@ -2232,22 +2239,13 @@ int wcn36xx_smd_open(struct wcn36xx *wcn)
>> INIT_LIST_HEAD(&wcn->hal_ind_queue);
>> spin_lock_init(&wcn->hal_ind_lock);
>>
>> - ret = wcn->ctrl_ops->open(wcn, wcn36xx_smd_rsp_process);
>> - if (ret) {
>> - wcn36xx_err("failed to open control channel\n");
>> - goto free_wq;
>> - }
>> -
>> - return ret;
>> + return 0;
>>
>> -free_wq:
>> - destroy_workqueue(wcn->hal_ind_wq);
>> out:
>> return ret;
>> }
>>
>> void wcn36xx_smd_close(struct wcn36xx *wcn)
>> {
>> - wcn->ctrl_ops->close();
>> destroy_workqueue(wcn->hal_ind_wq);
>> }
>> diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
>> index 21cc4ac7b5ca..4d96d56d266f 100644
>> --- a/drivers/net/wireless/ath/wcn36xx/smd.h
>> +++ b/drivers/net/wireless/ath/wcn36xx/smd.h
>> @@ -60,6 +60,7 @@ struct wcn36xx_hal_ind_msg {
>> };
>>
>> struct wcn36xx;
>> +struct qcom_smd_device;
>>
>> int wcn36xx_smd_open(struct wcn36xx *wcn);
>> void wcn36xx_smd_close(struct wcn36xx *wcn);
>> @@ -136,4 +137,7 @@ int wcn36xx_smd_del_ba(struct wcn36xx *wcn, u16 tid, u8 sta_index);
>> int wcn36xx_smd_trigger_ba(struct wcn36xx *wcn, u8 sta_index);
>>
>> int wcn36xx_smd_update_cfg(struct wcn36xx *wcn, u32 cfg_id, u32 value);
>> +
>> +int wcn36xx_smd_rsp_process(struct qcom_smd_device *sdev,
>> + const void *buf, size_t len);
>> #endif /* _SMD_H_ */
>> diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
>> index 7997cc1312ee..4be81f66e167 100644
>> --- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
>> +++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
>> @@ -103,19 +103,6 @@ struct nv_data {
>> u8 table;
>> };
>>
>> -/* Interface for platform control path
>> - *
>> - * @open: hook must be called when wcn36xx wants to open control channel.
>> - * @tx: sends a buffer.
>> - */
>> -struct wcn36xx_platform_ctrl_ops {
>> - int (*open)(void *drv_priv, void *rsp_cb);
>> - void (*close)(void);
>> - int (*tx)(char *buf, size_t len);
>> - int (*get_hw_mac)(u8 *addr);
>> - int (*smsm_change_state)(u32 clear_mask, u32 set_mask);
>> -};
>> -
>> /**
>> * struct wcn36xx_vif - holds VIF related fields
>> *
>> @@ -204,7 +191,13 @@ struct wcn36xx {
>> int rx_irq;
>> void __iomem *mmio;
>>
>> - struct wcn36xx_platform_ctrl_ops *ctrl_ops;
>> + struct qcom_smd_channel *smd_channel;
>> +
>> + struct qcom_smem_state *tx_enable_state;
>> + unsigned tx_enable_state_bit;
>> + struct qcom_smem_state *tx_rings_empty_state;
>> + unsigned tx_rings_empty_state_bit;
>> +
>> /*
>> * smd_buf must be protected with smd_mutex to garantee
>> * that all messages are sent one after another
>> --
>> 2.5.0
>>
>
>
>
> --
> Best regards,
> Eugene
Powered by blists - more mailing lists