linux-kernel - [PATCH 4/4] arm64: dts: Add ARM PL022 SPI DT nodes for NS2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1459236454-26285-5-git-send-email-anup.patel@broadcom.com>
Date:	Tue, 29 Mar 2016 12:57:34 +0530
From:	Anup Patel <anup.patel@...adcom.com>
To:	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will.deacon@....com>,
	Device Tree <devicetree@...r.kernel.org>,
	Linux ARM Kernel <linux-arm-kernel@...ts.infradead.org>
Cc:	Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>, Ray Jui <rjui@...adcom.com>,
	Scott Branden <sbranden@...adcom.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Jon Mason <jon.mason@...adcom.com>,
	Linux Kernel <linux-kernel@...r.kernel.org>,
	BCM Kernel Feedback <bcm-kernel-feedback-list@...adcom.com>,
	Anup Patel <anup.patel@...adcom.com>
Subject: [PATCH 4/4] arm64: dts: Add ARM PL022 SPI DT nodes for NS2

We have two ARM PL022 SPI instances in NS2 SoC. On NS2 SVK,
one of the ARM PL022 SPI host has Silabs si3226x slic connected
to chip-select #0 whereas second ARM PL022 SPI host has Atmel
AT25 EEPROM connected to chip-select #0.

This patch adds ARM PL022, Silabs si3226x, and Atmel AT25
DT nodes in NS2 DT and NS2 SVK DT respectively.

Signed-off-by: Anup Patel <anup.patel@...adcom.com>
Reviewed-by: Ray Jui <rjui@...adcom.com>
Reviewed-by: Scott Branden <sbranden@...adcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2-svk.dts | 45 ++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/broadcom/ns2.dtsi    | 22 ++++++++++++++++
 2 files changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index ce0ab84..54ca40c 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -72,6 +72,51 @@
 	status = "ok";
 };
 
+&ssp0 {
+	status = "ok";
+
+	slic@0 {
+		compatible = "silabs,si3226x";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
+&ssp1 {
+	status = "ok";
+
+	at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		at25,byte-len = <0x8000>;
+		at25,addr-mode = <2>;
+		at25,page-size = <64>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
 &sdio0 {
 	status = "ok";
 };
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index 0a92a68..123cd9c 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -354,6 +354,28 @@
 			status = "disabled";
 		};
 
+		ssp0: ssp@...80000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66180000 0x1000>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "spiclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssp1: ssp@...90000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66190000 0x1000>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "spiclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		hwrng: hwrng@...20000 {
 			compatible = "brcm,iproc-rng200";
 			reg = <0x66220000 0x28>;
-- 
1.9.1